Subramanian, Sathyapriya;Arumairaj, P.D.;Subramani, T.
Geomechanics and Engineering
/
제12권3호
/
pp.523-539
/
2017
Clay soils are typical for their swelling properties upon absorption of water during rains and development of cracks during summer time owing to the profile desorption of water through the inter-connected soil pores by water vapour diffusion leading to evaporation. This type of unstable soil phenomenon by and large poses a serious threat to the strength and stability of structures when rest on such type of soils. Even as lime and cement are extensively used for stabilization of clay soils it has become imperative to find relatively cheaper alternative materials to bring out the desired properties within the clay soil domain. In the present era of catastrophic environmental degradation as a side effect to modernized manufacturing processes, industrialization and urbanization the creative idea would be treating the waste products in a beneficial way for reuse and recycling. Bottom ash and ecosand are construed as a waste product from cement industry. An optimal combination of bottom ash-eco sand can be thought of as a viable alternative to stabilize the clay soils by means of an effective dispersion dynamics associated with the inter connected network of pore spaces. A CATIA model was created and imported to ANSYS Fluent to study the dispersion dynamics. Ion migration from the bottom ash-ecosand pile was facilitated through natural formation of cracks in clay soil subjected to atmospheric conditions. Treated samples collected at different curing days from inner and outer zones at different depths were tested for, plasticity index, Unconfined Compressive Strength (UCS), free swell index, water content, Cation Exchange Capacity (CEC), pH and ion concentration to show the effectiveness of the method in improving the clay soil.
Nam, Jung-Hwan;Jung, Hyun-Ju;Tapondjou, Leon Azefack;Lee, Kyung-Tae;Choi, Jong-Won;Kim, Won-Bae;Park, Hee-Juhn
Natural Product Sciences
/
제13권2호
/
pp.152-159
/
2007
To demonstrate anti-hyperlipidemic activity of the 19${\alpha}$-hydroxyursane-type triterpenoid (19${\alpha}$-HUT)-rich fraction, this fraction was prepared from the extract of Rubus crataegifolius leaves. This fraction was found to have anti-hyperlipidemic effect in a high fat diet-induced rat model from the observation of reduction of abdominal fat pad weights, atherogenic index and hypercholesterolemia at 30 and 60 mg/kg (p.o.) The 19${\alpha}$-HUT fraction was subjected to SiO$_2$, ODS, and/or Sephadex LH-20 column chromatography to yield a new triterpenoid (1) called pomolic acid ester along with nine known triterpenoids which are all 19${\alpha}$-HUTs: euscaphic acid (2), tormentic acid (3), 23-hydroxytormentic acid (4), kaji-ichigoside F$_1$ (5), rosamultin (6), niga-ichigosides F$_1$ (7) and F$_2$ (8), suavissimoside F$_1$ (9) and coreanoside F$_1$ (10). The structure of compound 1 was established as 28-O-formyl-3,19-dihydroxyurs-12-en-28-oic acid on the basis of 2D-NMR spectroscopic data and mass spectrum. Compound 1 was isolated for the first time from natural sources.
중국의 둔황 벽화는 자연과 인위적인 요소로 인하여 점점 퇴화되고 있으며 중국 둔황 벽화에 대한 보호연구는 1990년부터 벽화의 디지털 트랜스포메이션을 실시하였다. 그러나 값비싼 연구비용이 필요하고 대부분 관람객들은 디지털미디어에서 관람을 수동적으로 받아들이며 메타버스형 참여가 부족했다고 판단된다. 본 연구는 둔황 고굴 벽화를 연구범위로 정하고, 메타버스를 위해 COSPACES EDU 플랫폼에서 프로토타입을 제작하였다. 둔황벽화를 3차원으로 변환시키고 동굴모형에 이미지를 매핑하여 관광과 교육을 위한 코블록스 블록을 개발하는 등의 절차를 통하여 구현하였다. 또한 사례 연구를 통해 비싼 개발비용을 사용하지 않는 구체적인 방법론을 제시하여 몰입형 둔황벽화 세계를 쉽게 구축하고 관광 콘텐츠와 교육효과를 높이기 위한 프로세스를 개발 제안하였다. 그리고 100개의 유저 체험 설문 피드백을 기준으로 개선해야 할 연구 방향은 문화제 디테일에 대한 퀄리티를 강화하는 것으로 나타났다. 향후 연구를 통해 이를 보완, 최적화해야 할 것으로 판단된다.
As architectural forms tend to be large-scaled, high-storied and complicated, use of computer for processing design information has been generalized. However, CAD use in the process of developing architectural design has been neglected greatly in the educational field of architectural field due to the surging of recognition that it may limit the essential property of architectural design. It may be resulted from the limitation of CAD system, that is, it is because of tardy speed of application development for the related areas with the lack of simplicity and clarity of flexibility to be secured on the drawing and user interface. Recent CAD systems, however, overcome such a limitation, convert into object-based design from entity-based drawing, drafting and modeling for implementing design concept of architects and it connects with internet linked to superspeed information communication network and changes process and stream of architectural design. Therefore, this study deals with utility of object based CAD system with products of Autodesk Co. and consequently obtain the following conclusions. First, it expands architect's design areas by supporting cooperative design system based on model-based architectural design and internet. Second, it reduces consumption of personal and material resources and time in the process of drawing production for improving architectural design works. Third, it can reduce the frequent design changes by improving understanding of architectural space with visualization of immediate 3D information, escaping from traditional methods to deliver design information to building owner through 2D drawing or model and perspective drawing requiring much cost and time. Fourth, it keeps exactness without omission or duplication of design information and generate and renew information of all related drawings on a drawing. Fifth, it is possible to change difficult and boring architectural design work into a pleasure owing to immediate modeling and drawing of design idea. In addition, digital drawing generated by using object-based CAD system can playa role of establishing Urban Information System to be used for protecting from building in disaster and urban disasters in connection with GIS numerical map and be used for reference of all kinds of information required fro post-management of buildings. However, what is more important is that surplus time from introduction of object-based CAD system should be used for consideration to be recognized as a good space and building built as a product of this project for comfort to urban people.
Objectives:eurotoxicity is mediated by nitric oxide(NO) in the rat primary neuronal cultures and assess the effect of $Mn^{2+}$ on the N-methyl-D aspartate(NMDA) receptors. Methods: We have used 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT)assay to examine the effect of cytotoxicity of $MnCl_2$ in neuronal cells , NO production was determined by measuring nirites, a stable oxidation product of NO. The neurons in the rat that contains neuronal nitric oxide synthase(nNOS) were examined by immunofluorescence and confocal microscopy. The effects of $Mn^{2+}$ on the NMDA receptors was assesed by the whole cell voltage clamp technique. Results: We showed that the NO release and NOS expression was increased with 500uM $MnCl_2$ treatment and an NOS inhibitors, $N^G-nitro-L-arginine$, prevented neurotoxicity elicited by manganese. In the electrophysiological study, $Mn^{2+}$ does not block or activate the NMDA receptors and not pass through the NMDA receptors in a neurons of basal ganglia. Conclusions: It is concluded that manganese neurotoxicity in basal ganglia was partially mediated by nitric oxide in the cell culture model.
Most of traditional design processes of mechanical parts are regarded as sequential and discrete, since different kinds of softwas should be introduced. In this paper, we develop an integrated fram ework for virtual design and performance testing of an automobile seat. The system is composed of four modules, i.e. CAD, static analysis, dynamic analysis, and draft drawing module. In the CAD module, PRO/ENGINEER 3D seat model is created using parameters to be modified with the result of static and dynamic analysis. In the static analysis, headrest tere used in each design stage make it difficult to feedback their results to upstream process. These discrete processes may result in time loss and cost rise. In recent years, life cycle of product is reduced. To have competence with others, new concept design processt is simulated using ANSYS. In the dynamic analysis module, FMVSS201 test is simulated using DADS. Overall data flow is controlled by Motif. The advantage of the system is that even a novice can perform and review the whole design process, without a good hand at professional design/analysis S/W in each stage. The system also provides a virtual design space, where engineers in different development stage can access common data of design models. The concept could be applied to other fields and it could reduce time and money required in design process.
Stricter environmental demands have increased the need to replace conventional C/D bleaching sequence by chlorine-free sequence. Permanganate is well known as a powerful oxidant and have been used industrially in variable fields. However, it has considered to be difficult to use permanganate as a bleaching reagent because of its strong oxidative effect decreasing the viscosity of pulps extremely. We have tried to use permanganate as a bleaching reagent for KP under the mild condition and it was clear that pernanganate oxidized lignin remained in pulps selectively and increased pulp brightness decreasing K number of pulps with small degradation of cellulose. We have employed the neutral condition in the permanganate bleaching process in this study. In this case, permanganate was converted to manganese dioxide after bleaching reaction. The manganese dioxide is remained in the treated pulp fibers because of its insolublity in water. So it was required to reduction the manganese oxide to manganese ion by using reductants with acid. In this paper, we proposed to use oxalic acid as a reducing reagent converting manganese oxide to manganese ion after bleaching reaction. Oxalic acid plays the role as a reductant and a acid, so post-treatment after bleaching became to be easy by using oxalic acid. On the study using lignin model compounds, it was clear that permaganate react with phenols firstly, after that oxalic acid reduce the manganese oxide to manganese ion in the mixture of permanganate, phenols and oxalic acid. Several lignin model compounds ($\textit{p}$-hydroxybenzaldehyde, vanillin, syringaldehyde, veratraldehyde) are selected to elucidate the effect of substituents on reaction rate and its mechanism with permanganate including oxalic acid in this study. Except for veratraldehyde, the rate of oxidative degradation of phenolic compounds by permanganate with oxalic acid are higher than neutral condition. Especially, the degradation rate of $\textit{p}$-hydroxybenzaldehyde are strongly dependent on pH of reaction mixture. On the other hand, the degradation rate of veratraldehyde are decreased with decreasing pH and main degradation product is veratric acid. This result indicate that pH of bleaching liquor should be kept over 2 to degrade of non-phenolic lignin in the pulps effectively in permanganate bleaching.
구조해석은 대기업뿐 만 아니라 중소 중견기업에서도 제품 납품을 위한 인증절차의 강화 및 개념설계에서 상세설계로 진행되는 프로세스에서의 시간 단축을 위해 시험과 함께 필수 절차로 활용되고 있다. 적은 비용으로 활용이 가능한 오픈소스 솔버는 자동으로 전처리 데이터를 생성해주는 상용 솔버와 다르게 격자와 같은 입력데이터가 문제가 있을 경우 계산단계에서 오류나 실패하는 경우가 빈번하게 발생할 수 있기 때문에 비 전문가가 활용하기가 어렵다. 본 논문에서는 기존의 구조해석 오픈소스 솔버(Caculix, Code_Aster)를 이용하여 사용자가 손쉽게 기계적 구조 문제의 분석에 활용이 가능한 전 후 처리기를 개발하였다. 특히, 3D 모델, 격자, 시뮬레이션 조건, 결과 정보 분석 등의 각 단계에서 오픈소스 솔버에 따라서 상이한 형태의 데이터를 분석하고 그에 맞는 정확한 정보를 추출 및 생성하는 알고리즘을 개발하여 적용하였다. 또한, 오픈소스 솔버의 계산 정확도를 높이고 오류를 방지하기 위하여 솔버 특성에 맞는 격자를 생성해주고 격자 모델의 자동 힐링 기능을 개발하였다. 마지막으로 해당 시스템의 정확성을 검증하기 위하여 사용소프트웨어와 비교한 검증 결과와 활용 결과를 설명한다.
3D 컴퓨터 애니메이션의 모델링 작업과정은 사실적 형태 구현을 위한 최적의 작업조건에 대한 방법들이 진일보되고 있다. 1999년 출시된 모델링 전문 소프트웨어인 ZBrush는 기존과 다른 용이한 제작방식으로 인해, 캐릭터 모델 작업에 있어서 필수요소로 자리 잡고 있다. 이에, 본 논문에서는 보다 최적화된 애니메이션 캐릭터 모델 제작을 위한 방법으로써 두 개의 소프트웨어 (Z-Brush, Maya)의 연계된 제작시스템에 대한 효율성에 대해 고찰하고, 그 시사점을 제시하고자 한다. 이를 위해, 첫째 폴리곤 모델링과 리토폴로지(retopology)에 대한 기술적 특성에 대해 살펴보았으며, 둘째, 이를 바탕으로, 기존의 캐릭터 모델링을 위한 ZBrush와 Maya의 연계적 작업 과정의 문제점을 분석한다. 셋째, 새로운 모델링 작업의 최적화 기법의 효율성을 검증하기 위해, 단편 애니메이션 영화 'Cula & Mina'의 Dumvee 캐릭터의 제작과정을 사례로 하여 그 제작과정을 분석하였다. 본 연구를 통해, 두 개의 소프트웨어를 이용한 모델링 공정 연계 시스템은 보다 효과적으로 하이 폴리곤(high polygon) 모델에 대한 제작의 용이함과 높은 완성도를 구현할 수 있음을 알 수 있었다. 이를 통해, 기존과 다른 효율적 모델링 방식을 고찰함으로써, 모델링 관련 수업이나 관련 산업체의 제작 시스템의 최적화를 위한 참고자료가 되리라 사료된다. 또한, 본 연구는 폴리곤 모델링 제작과정의 개선을 위한 '실용적 대안 제시'를 목적으로 하는 기술제작 사례논문으로 접근하였다.
본 연구의 목적은 정부의 성과공유제 운영 및 성과공유제 지원정책이 기업 성과에 미친 효과성에 대한 실증적 분석을 통해, 효과적인 성과공유제 지원정책의 개선방안을 제시하는 데 있다. 이에 따라, 정부의 현 성과공유제 운영현황 문제점을 분석하고, 225개 성과공유제 도입(위탁)기업과 협력(수탁)기업을 대상으로 기업성과에 대한 설문조사를 실시하였다. 연구결과, 성과공유제는 다양한 인센티브 부족에 따른 도입기업의 증가와 확산 어려움, 현금배분 등 실질적인 성과공유 미흡, 신기술 신제품 혁신유도가 어려운 경영관리시스템 모델 증가, 1차 이외 2 3차 협력사로 제도 확산 한계 등 일부 개선점이 발견되었다. 반면, 그간 정부의 성과공유제 지원정책은 성과공유제 도입(위탁)기업과 협력(수탁)기업 모두에 긍정적 영향을 미쳤으며 특히 협력(수탁)기업의 성과에 긍정적 영향을 미쳤음이 확인되었다. 향후 과제로, 협력(수탁)기업의 매출증가 또는 R&D 역량증가 등과 같은 보다 객관적이고 정량화된 데이터를 기반으로 기업현황과 기업성과간 상호 연관성 등의 검증을 통한 연구 수행을 통해 객관성과 정확도를 제고할 필요가 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.