• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.191-196
• /
• 2002

The paper presents a numerical and experimental investigation on dynamic behaviors of a towed low tension cable. In the numerical study, an implicit finite difference algorithm is employed for three-dimensional cable equations. Fluid and geometric non-linearity and bending stiffness are considered and solved by Newton-Raphson iteration. Block tri-diagonal matrix method is applied for the fast calculation of the huge size of matrices. In order to verify the numerical results and to see real physical phenomena, an experiment is carried out for a 6m cable in a deep and long towing tank. The cable is towed in two different ways; one is towed at a constant speed and the other is towed at a constant speed with top end horizontal oscillations. Cable tension and shear forces are measured at the top end. Numerical and experimental results are compared with good agreements in most cases but with some differences in a few cases. The differences are due to drag coefficients caused by vortex shedding. In the numerical modeling, non-uniform element length needs to be employed to cope with the sharp variation of tension and shear forces at near top end.

• Journal of Electrical Engineering and Technology
• /
• 제3권3호
• /
• pp.401-407
• /
• 2008

The dynamic model and displacement control of piezoelectric actuators, which are commercially available materials for managing extremely small displacements in the range of sub-nanometers, are presented. Piezoceramics have electromechanical characteristics that transduce energy between the electrical and mechanical domains. However, they have hysteresis between the input voltage and output displacement, and this behavior is very demanding and complicated. In this paper, we propose a method of designing the control algorithm, and present the dynamic modeling equations that represent the hysteretic behavior between input voltage and output displacement. For this process, the piezoelectric actuator is treated as a second-order linear dynamic system and system constants are determined by the system identification method. Also, a classical PID controller is designed and used to regulate the output displacement of the actuator. To evaluate the performance of the proposed method, numerical simulation results are presented.

• Journal of Mechanical Science and Technology
• /
• 제19권4호
• /
• pp.1006-1017
• /
• 2005

In this work, we developed an accurate and efficient radiative finite volume method applicable for the complex 2D planar and 3D geometries using an unstructured-grid finite volume method. The present numerical model has fully been validated by several benchmark cases including the radiative heat transfer in quadrilateral enclosure with isothermal medium, tetrahedral enclosure, a three-dimensional idealized furnace, as well as convection-coupled radiative heat transfer in a square enclosure. The numerical results for all cases are well agreed with the previous results. Special emphasis is given to the parallelization of the unstructured-grid radiative FVM using the domain decomposition approach. Numerical results indicate that the present parallel unstruc­tured-grid FVM has the good performance in terms of accuracy, geometric flexibility, and computational efficiency.

• 한국해양공학회지
• /
• 제12권1호
• /
• pp.99-106
• /
• 1998

3차원 파수조에서 완전 비선형파를 시뮬레이션하기 위하여 우선 랜킨 소스를 기저로한 적분방정식을 고차경계요소법을 이용하여 이산화하였다. 그리고 방사경계조건은 파흡수 비치와 포텐셜 스트레칭 기법을 이용하여 모델링하였으며, 비선형 자유표면과 경계조건식은 고차 예측 및 보정 기법을 이용하여 시간 적분하였다. 파흡수 비치는 파의 진행방향 특성에 따라 수조내에 다양하게 배치할 수 있으며 비칭서 흡수가 덜된 파는 수조의 길이 방향 끝단에서 포텐셜 스트레칭 기법에 의하여 반사없이 진행하도록 하였다. 수치실험 결과 일-에너지 보존법칙과 모멘텀-임펄스 보존 법칙이 만족됨으로써 본 수치기법의 효용성이 검증되었다.

• Structural Monitoring and Maintenance
• /
• 제9권3호
• /
• pp.237-258
• /
• 2022

This paper studies detecting and locating loose bolts using nonlinear guided waves. The 3D Finite Element (FE) simulation is used for the prediction of guided waves' interactions with loose bolted joints. The numerical results are verified by experimentally obtained data. The study considers bolted joints consisting of two bolts. It is shown that the guided waves' interaction with surfaces of a loose bolted joint generates Contact Acoustic Nonlinearity (CAN). The study uses CAN for detecting and locating loose bolts. The processed experimentally obtained data show that the CAN is able to successfully detect and locate loose bolted joints. A 3D FE simulation scheme is developed and validated by experimentally obtained data. It is shown that FE can predict the propagation of guided waves in loose bolts and is also able to detect and locate them. Several numerical case studies with various bolt sizes are created and studied using the validated 3D FE simulation approach. It is shown that the FE simulation modeling approach and the signal processing scheme used in the current study are able to detect and locate the loose bolts in imperfect bolted joints. The outcomes of this research can provide better insights into understanding the interaction of guided waves with loose bolts. The results can also enhance the maintenance and repair of imperfect joints using the nonlinear guided waves technique.

• 농업과학연구
• /
• 제48권3호
• /
• pp.515-526
• /
• 2021

The frequency of typhoons and torrential rainfalls has increased due to climate change, and the concurrent risk of breakage of dams and reservoirs has increased due to structural aging. To cope with the risk of dam breakage, a more accurate emergency action plan (EAP) must be established, and more advanced technology must be developed for the prediction of flooding. Hence, the present study proposes a method for establishing a more effective EAP by performing flood and inundation analyses using one- and two-dimensional models. The probable maximum flood (PMF) under the condition of probable maximum precipitation (PMP) was calculated for the target area, namely the Gyeong-cheon reservoir watershed. The breakage scenario of the Gyeong-cheon reservoir was then built up, and breakage simulations were conducted using the dam-break flood forecasting (DAMBRK) model. The results of the outflow analysis at the main locations were used as the basis for the one-dimensional (1D) and two-dimensional (2D) flood inundation analyses using the watershed modeling system (WMS) and the FLUvial Modeling ENgine (FLUMEN), respectively. The maximum inundation area between the Daehari-cheon confluence and the Naeseong-cheon location was compared for each model. The 1D flood inundation analysis gave an area of 21.3 km², and the 2D flood inundation analysis gave an area of 21.9 km². Although these results indicate an insignificant difference of 0.6 km² in the inundation area between the two models, it should be noted that one of the main locations (namely, the Yonggung-myeon Administrative and Welfare Center) was not inundated in the 1D (WMS) model but inundated in the 2D (FLUMEN) model.

• 한국자기학회지
• /
• 제21권1호
• /
• pp.15-22
• /
• 2011

강자성체를 정밀해석하기 위해서는 포화자화 현상과 히스테리시스 현상을 모두 고려해 주어야만 한다. Preisach 모델링은 변화율이 심한 히스테리시스 현상을 매우 잘 표현해 낼 수 있는 수치모사 방법이다. 하지만 정자기 유한요소법과 Preisach 모델링을 사용한 자화해석 반복 과정에서 수렴성이 떨어진다는 큰 문제점을 가지고 있다. 특히 자화율의 기울기가 급격히 변화할 경우 수렴에 많은 문제점을 가지고 있다. 이러한 문제점은 일반적인 M-H 변수를 사용하지 않고, M-B 변수를 사용하면 해결할 수 있다. 본 논문에서는 일반적인 M-H를 이용한 Preisach 모델링의 평면 분포로부터 M-H 변수를 M-B 변수화 시키는 방법을 제안하고 있고, 2차원 정자기 유한요소법과 M-H, M-B 변수를 이용한 Preisach 모델링을 비교 분석하여 Preisach 모델링의 수렴성 문제를 해결하는 방법에 대해 기술하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권3호
• /
• pp.1-9
• /
• 2017

The numerical analysis of groundwater flow is indispensable for predicting problems associated with water resource development, civil works, environmental hazards, and nuclear power plant construction. Korea lacks public regulatory procedures and guidelines for groundwater flow modeling, especially in nuclear facility sites, which makes adequate evaluation difficult. Feasible step-by-step guidelines are also unavailable. Consequently, reports on groundwater flow modeling have low-grade quality and often present controversial opinions. Additionally, without public guidelines, maintaining consistency in reviewing reports and enforcing laws is more challenging. In this study, the guidelines for groundwater flow modeling were reviewed for three countries - the United States (Documenting Groundwater Modeling at Sites Contaminated with Radioactive Substances), Canada (Guidelines for Groundwater Modelling to Assess Impacts of Proposed Natural Resource Development Activities), and Australia (Australian Groundwater Modelling Guidelines), with the aim of developing groundwater flow modeling regulatory guidelines that can be applied to nuclear facilities in Korea, in accordance with the Groundwater Act, Environmental Impact Assessment Act, and the Nuclear Safety Act.

• 대한환경공학회지
• /
• 제33권4호
• /
• pp.251-257
• /
• 2011

이산화탄소의 해양 지중저장에 대한 전산모사를 위해 실제 이산화탄소가 저장되는 해양 지중 저장층에 대한 3차원 전산모형을 개발하였다. 특히, 실제 저장층의 3차원 구조를 모사하기 위하여 공극의 크기를 불규칙(random)적으로 부여하는 수치적 방법을 고안하여 3차원 전산모형을 구성하였고, 이를 균일한 공극 구조의 경우와 비교하였다. 이렇게 구성된 3차원 공극모형 내의 초임계 이산화탄소 유동을 시뮬레이션하기 위하여 전산유체역학을 사용하였다. 이러한 초임계 이산화탄소의 시뮬레이션에는 실제 저장층의 환경 즉 온도 및 압력을 동일하게 모델링하여 적용하였다. 공극 구조가 $CO_2$의 유동에 미치는 영향을 살펴보기 위해, 세 가지 형태의 3차원 전산모형의 공극 구조 내부를 흐르는 초임계 이산화탄소 유동에 대한 수치해석을 수행하였으며, 특히 3차원 전산모형의 내부유동에 대한 압력강하 및 투수율을 계산하여 본 모형이 해양 지중저장의 전산모사에 적합한지를 판단하고, 이산화탄소 유량 증가에 따른 초임계 이산화탄소 유동의 특성을 살펴보았다.

• 지구물리와물리탐사
• /
• 제2권2호
• /
• pp.86-95
• /
• 1999

이 연구에서는 적분방정식의 근사해를 이용한 3차원 모델링 알고리듬을 구성하고 그 효율성을 분석하였다. 전기장 적분방정식에 확장 Born 근사(extended Born approximation)를 적용시켜 알고리듬을 구성하였으며 모델링의 계산 속도를 향상시키기 위하여 Green 텐서 적분을 공간 주파수 영역에서 수행하였다. 이 방법은 연속 함수로 표현되는 전기전도도를 갖는 이상체에 대한 모델 계산을 가능하게 하고, Green 텐서 적분시 발생하는 특이치 문제가 발생하지 않는 장점이 있다 얇은 전도체에 대한 모델링 계산 결과를 적분방정식의 해와 비교하여 알고리듬의 타당성을 검증하였다. 전기전도도 물성차, 사용 송신원의 주파수에 따른 개발된 알고리듬의 분석을 통하여 물성차 1:16 정도, 사용주파수는 100 Hz-100 kHz까지 정확한 결과를 얻었다. 그러나, 확장 Born 근사는 송신원과 모델의 상대적인 위치에 따라 오차를 나타내었다. 한편, 연속적인 전기전도도 함수를 갖는 모델에 대한 이 알고리듬의 적용성를 알아보기 위하여 서로 다른 전기전도도를 갖는 두 이상체가 접합한 모델에 대하여 적분방정식의 해와 비교하였으며 양호한 결과를 나타내었다.