• 패션비즈니스
• /
• 제20권3호
• /
• pp.30-42
• /
• 2016

The objective of this study was to perform 3D solid modeling from 3D scanned surface images of cotton and silk in order to calculate the thermal heat transfer responses using numerical simulations. Continuing from the previous methodology, which provided 3D surface data for a fabric through optical measurements of the fabric microstructure, a simplified 3D solid model, containing a defined unit cell, pattern unit and fabric structure, was prepared. The loft method was used for 3D solid-model generation, and heat transfer calculations, made for the fabric, were then carried out using the 3D solid model. As a result, comprehensive protocols for 3D solid-model generation were established based on the optical measurements of real fabric samples. This method provides an effective means of using 3D information for building 3D models of actual fabrics and applying the model in numerical simulations. The developed process can be used as the basis for other analogous research areas to investigate the physical characteristics of any fabrics.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.121-122
• /
• 2005

• 한국해양공학회지
• /
• 제37권2호
• /
• pp.68-79
• /
• 2023

Even though submerged breakwater reduces incident wave energy, it redistributes the coastal area's wave-induced current, sediment transport, and morphological change. This study examines the coastal hydrodynamics and the morphological response of a wave-dominated beach with submerged breakwaters installed through field observation and quasi-3D numerical modeling. The pre-and post-storm bathymetry, water level, and offshore wave under storm forcing were collected in Bongpo Beach on the East coast of Korea and used to analyze the coastal hydrodynamic response. Four vertically equidistant layers were used in the numerical simulation, and the wave-induced current was examined using quasi-3D numerical modeling. The shore normal incident wave (east-northeast) generated strong cross-shore and longshore currents toward the hinterland of the submerged breakwater. However, the oblique incident wave (east-southeast) induced the southeastward longshore current and the sedimentation in the northeast area of the beach. The results suggested that the incident wave direction is a significant factor in determining the current and sediment transport patterns in the presence of the submerged breakwaters. Moreover, the quasi-3D numerical modeling is more appropriate for estimating the wave transformation, current, and sediment transport pattern in the coastal area with the submerged breakwater.

• 한국시뮬레이션학회논문지
• /
• 제25권3호
• /
• pp.97-105
• /
• 2016

본 논문에서는 철근 모사 방법에 따른 관통자의 콘크리트 관통성능 변화를 수치적으로 분석하였다. 관통해석은 상용 전산해석 프로그램인 AUTODYN-3D을 사용하여 수행하였고, Hanchak의 시험 데이터를 사용하여 해석 방법의 신뢰성을 입증하였으며, 철근의 강도와 지름 및 관통자의 충돌위치, 속도를 변수로 사용하여 충돌 해석을 수행하였다. 철근 모사가 관통성능에 미치는 영향을 정량적으로 분석하기 위해, 관통자의 잔류 속도를 계산하여 침투/관통성능을 평가하였다.

• 대기
• /
• 제31권3호
• /
• pp.251-265
• /
• 2021

This study examined the impact of assimilating the bending angle (BA) obtained via the global navigation satellite system radio occultation (GNSS RO) of the three new satellites (KOMPSAT-5, FY-3C, and FY-3D) on analyses and forecasts of a numerical weather prediction model. Numerical data assimilation experiments were performed using a three-dimensional variational data assimilation system in the Korean Integrated Model (KIM) at a 25-km horizontal resolution for August 2019. Three experiments were designed to select the height and quality control thresholds using the data. A comparison of the data with an analysis of the European Centre for Medium-Range Weather Forecasts (ECMWF) integrated forecast system showed a clear positive impact of BA assimilation in the Southern Hemisphere tropospheric temperature and stratospheric wind compared with that without the assimilation of the three new satellites. The impact of new data in the upper atmosphere was compared with observations using the infrared atmospheric sounding interferometer (IASI). Overall, high volume GNSS RO data helps reduce the RMSE quantitatively in analytical and predictive fields. The analysis and forecasting performance of the upper temperature and wind were improved in the Southern and Northern Hemispheres.

• 한국도로학회논문집
• /
• 제16권2호
• /
• pp.43-52
• /
• 2014

PURPOSES : To solve problems in current compaction control DCPT(Dynamic Cone Penetrometer Test), highly correlated with various testing methods, simple, and economic is being applied. However, it、s hard to utilize DCPT results due to the few numerical analyses for DCPT have been performed and the lack of data accumulation. Therefore, this study tried to verify the validation of numerical modeling for DCPT by comparing and analyzing the results of numerical analyses with field tests. METHODS: The ground elastic modulus and PR(Penetration Rate) value were estimated by using PFC(Particle Flow Code) 3D program based on the discrete element method. Those values were compared and analyzed with the result of field tests. Also, back analysis was conducted to describe ground elastic modulus of field tests. RESULTS : Relative errors of PR value between the numerical analyses and field tests were calculated to be comparatively low. Also, the relationship between elastic modulus and PR value turned out to be similar. CONCLUSIONS : Numerical modeling of DCPT is considered to be suitable for describing field tests by carrying out numerical analysis using PFC 3D program.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권3호
• /
• pp.385-392
• /
• 2018

This paper presents 2D numerical modeling to calculate ship-ice interactions that occur when an icebreaker advances into ice-covered water. The numerical model calculates repeated icebreaking of an ice plate and removal of small ice floes. The icebreaking of the ice plate is calculated using a ship-ice contact detection technique and fluid-structural interaction of ice plate bending behavior. The ship-ice interactions in small ice floes are calculated using a physically based modeling with 3DOF rigid body equations. The ice plate is broken in crushing, bending, and splitting mode. The ice floes drift by wind or current and by the force induced by the ship-ice interaction. The time history of ice force and ice floe distribution when an icebreaker advances into the ice-covered water are obtained numerically. Numerical results demonstrate that the time history of ice force and distribution of ice floes (ice channel width) depend on the ice floe size, ship motion and ice drifting by wind or current. It is shown that the numerical model of ship maneuvering in realistic ice conditions is necessary to obtain precise information about the ship in ice-covered water. The proposed numerical model can be useful to provide data of a ship operating in ice-covered water.

• Design & Manufacturing
• /
• 제13권2호
• /
• pp.6-11
• /
• 2019

In this study, we constructed the mathematical model to evaluate the roundness for plastic injection mold parts with complicated 3D curvatures. Mathematically we started off from the equation of circle and successfully derived an analytical solution so as to minimize the area of the residuals. On the other hand, we employed the numerical method the similar optimization process for the comparison. To verify the mathematical models, we manufactured and used a ball valve type plastic parts to apply the derived model. The plastic parts was fabricated under the process conditions of 220-ton injection mold machine with a raw material of polyester. we experimentally measured (x, y) position using 3D contact automated system and applied two mathematical methods to evaluated the accuracy of the mathematical models. We found that the analytical solution gives better accuracy of 0.4036 compared to 0.4872 of the numerical solution. The numerical method however may give adaptiveness and versatility for optional simulations such as a fixed center.

• Structural Engineering and Mechanics
• /
• 제69권5호
• /
• pp.499-509
• /
• 2019

While the wheel flat is an asymmetrical phenomenon in the railway, majority of researches have used two-dimensional models in the investigation of the effect of wheel flat on the wheel rail forces. This is due to the considerably low computational costs of two dimensional (2D) models although their reliability is questionable. This leaves us with the question of "what is the optimum modeling technique?". It is addressed in this research. For this purpose, two and three dimensional numerical models of railway vehicle/track interaction were developed. The three dimensional (3D) model was validated by comparisons of its results with those obtained from a comprehensive field tests carried out in this research and then, the results obtained from the 2D and 3D models were compared. The results obtained indicate that there are considerable differences between wheel/rail forces obtained from the 2D and 3D models in the conditions of medium to large wheel-flats. On the other hand, it was shown that the results of the 2D models are reliable for particular ranges of vehicle speed, railway track stiffness and wheel-fats lengths and depths. The results were used to draw a diagram, which presents the optimum modeling technique, compromising between the costs and accuracy of the obtained results.

• 한국지반환경공학회 논문집
• /
• 제12권7호
• /
• pp.57-65
• /
• 2011

본 연구에서는 3차원 개별요소해석 코드인 Particle Flow Code, $PFC^{3D}$(Itasca)를 이용, 조립재료의 실내 삼축압축시험에 대한 개별요소 수치 모델링을 수행하였으며, 해석 모델과 개별요소를 대상으로 다양한 상사 조건에 대한 개별요소 수치 모델링을 수행, 그 결과를 통해 각각의 스케일 조건이 최종 수치 모델링 결과에 미치는 영향을 분석하였다. 3차원 개별요소 수치 모델링은 기존 2차원 모델링 대비 별도의 간극률 환산 없이 정확한 초기 조건 구현이 가능했으며, 응력-변형 및 체적변화 거동, 강도정수등에 있어 실내시험 결과와 유사한 수치 해석적 예측이 가능하였다. 해석 모델과 개별요소에 대한 다양한 상사비 조건별 수치 모델링 결과, 3차원 해석 시의 안정적 예측결과 도출 및 수치 시험실 활용에 대한 적정성을 확보하되, 해석시간 단축 및 해석 효율성 확보를 위해서는 해석 모델과 개별요소에 대한 적정 상사비 결정이 필요함을 알 수 있었다. 해석 모델의 크기와 개별요소의 입경크기를 변화시켜 개별요소 수치모델링을 수행한 결과, 대부분의 경우 전체적인 응력-변형 거동에 차이가 발생하였지만, 점착력과 내부 마찰각의 강도정수는 $D_{mod}/D_{gmax}$ < 10 조건에 유사한 결과를 보였으며, 개별요소 방법이 수치 시험실 기법을 이용한 강도정수 산정에 효과적으로 적용될 수 있음을 확인할 수 있었다.