• Journal of Astronomy and Space Sciences
• /
• v.14 no.1
• /
• pp.44-58
• /
• 1997

The BVR CCD photometric observations of W UMa-type eclipsing binary SS Ari were made on ten nights from November 1996 to December 1996. Eight new times of minimum lights were derived. The analysis of times of minima of SS Ari confirms the suggestions of other previous investigators that the orbital period of SS Ari have been suffering from a sinusoidal varition. The amplitude and period for the cyclic period changes were calculated as about $58^{y}$ and $0.^{d}053$, respectively. The period variation has been discussed in terms of two potential mechanisms: 1) the light-time effect due to a hypothetical third body and 2) deformations in the convective envelope of a magnetically active component. In the earlier case, the third body has a mass of $1.3M_{\odot}$, if exist, in the form of a white dwarf or a binary system. It seems that the system velocities from the spectroscopic observations supports this interpretation. Meanwhile in the latter case, the primary component is mainly responsible for the magnetic activity of this system with a theoretical amplitude of $\pm0.^{m}08$. However, we cannot make a conclusion which is reasonable explanation at this point, due to lack of observational data. Moreover, the period variation of SS Ari shows duplication about $14^y$, cyclic period with an amplitude of about $0.^d001$ to the above periodic change. We also cannot make an acceptable conclusion for it at this time.

• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.65-70
• /
• 2021

This study presents a method to efficiently advance the Republic of Korea's Unmanned Systems through the analysis of the development of the U.S. Unmanned System Policy. After the occurrence of the September 11 attacks, the U.S. developed Unmanned Systems as a part of RMA and became the leader in this area. The system went through numerous trials and errors during the development and acquisition. From these experiences, the U.S. had embodied Unmanned Systems acquisition methods by establishing Unmanned Systems Development Guidance and DoD Autonomy Community of Interest in 2012. In addition, as diverse unmanned programs started to proceed, it promoted Core Technology development sharing and simplification of functions of the Unmanned Systems to exclude budget-wasting elements such as duplication of programs. The Republic of Korea must politically build a collaborative system between industry/academia/research institute/military and apply evolutionary development strategies from the first step of the development of the Unmanned Systems the future Game Changer. In operations, concepts of the Manned/Unmanned Systems complex operation should be established and intelligent S/W, Open System, and Cyber Security technologies to materialize them developed.

• The KIPS Transactions:PartD
• /
• v.13D no.3 s.106
• /
• pp.399-404
• /
• 2006

A real-time system is used for various systems from small embedded systems to distributed enterprise systems. Because it has a characteristic that provides a service on time, developers should make efforts to keep this property about time when developing real-time applications. As the result of research about real-time system indicates, TMO model supports various functions for time processing according to the real-time concept. And it guarantees response time which developers defined. So developers need a point of reference to define deadline and check the correctness of time. This paper proposes an improved PS-Block as an infrastructure of analysis tools for TMO to present a point of reference. There is a problem that the existing PS-Block has overhead caused by a policy making duplicated blocks. As such, this paper implements a PS-Block Timing Model to reduce the overhead due to block duplication, and defines a base class for searching in PS-Block. The PS-Block Timing Model, using an improved PS-Block structure, offers a point of reference of deadline and an infrastructure of execution time analysis according to the PS-Block configuration policy. Therefore, TMO developers can easily verify deadline of real-time methods, and improve reliability, and reduce development terms.

• The Journal of Society for e-Business Studies
• /
• v.22 no.2
• /
• pp.137-152
• /
• 2017

The decline in the price of IT devices and the development of the Internet have created a new field called Internet of Things (IoT). IoT, which creates new services by connecting all the objects that are in everyday life to the Internet, is pioneering new forms of business that have not been seen before in combination with Big Data. The prospect of IoT can be said to be unlimited in its utilization. In addition, studies of standardization organizations for smooth connection of these IoT devices are also active. However, there is a part of this study that we overlook. In order to control IoT equipment or acquire information, it is necessary to separately develop interworking issues (IP address, Wi-Fi, Bluetooth, NFC, etc.) and related application software or apps. In order to solve these problems, existing research methods have been conducted on augmented reality using GPS or markers. However, there is a disadvantage in that a separate marker is required and the marker is recognized only in the vicinity. In addition, in the case of a study using a GPS address using a 2D-based camera, it was difficult to implement an active interface because the distance to the target device could not be recognized. In this study, we use 3D Depth recognition camera to be installed on smartphone and calculate the space coordinates automatically by linking the distance measurement and the sensor information of the mobile phone without a separate marker. Coordination inquiry finds equipment of IoT and enables information acquisition and control of corresponding IoT equipment. Therefore, from the user's point of view, it is possible to reduce the burden on the problem of interworking of the IoT equipment and the installation of the app. Furthermore, if this technology is used in the field of public services and smart glasses, it will reduce duplication of investment in software development and increase in public services.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.73-80
• /
• 2006

The main purpose of this study is to help develop the productional system of the three dimensional digital animation domestically. Many 30 digital animation projects are being developed and finished with foreign computer graphics technology. However, the 3D animation market in Korea is not as good as the ones in other countries. One of the most significant problems is the lack of a program of study in Korea concerning productional systems used to create 3D animation. We previously imported an advanced productional system from the U.S., which was adaptable to big projects, and consequently, expanded the international digital animation market. Now, we need to develop a new production system which is fully adaptable to the Korean market. A non-sequential system of 3D digital animation tailored for small projects is more adaptable to domestic industry than the sequential system known as the 'Pipeline system.' A non-sequential system is good for small productions that are trying to create animation on a limited budget. The workers in this system can learn to make animation fast and effectively. They can also learn how to discuss with the others in order to avoid duplication of action. In contrast, in the Pipeline System, many workers repeat confirmation steps during the process for the same animations. The benefit of the non-sequential system is that the worker's interest and education can speed up production, because he/she can quickly learn every step of the animation process instead of just doing a particular job which does not allow him/her to observe the other steps involved. The 'animatic' step is the most important in the non-sequential system. The final animation is produced from the animatic. It is developed from scratch through to the final product but only after the agreement of all the workers, including a director.

• Clinical and Experimental Pediatrics
• /
• v.53 no.3
• /
• pp.432-436
• /
• 2010

Transient neonatal diabetes mellitus (TNDM) has been associated with paternal uniparental isodisomy of chromosome 6, paternally inherited duplication of 6q24, or a methylation defect at a CpG island of the ZAC or HYMAI gene. We experienced a case of TNDM in which the patient presented with hyperglycemia, macroglossia, and intrauterine growth retardation, caused by a paternally derived HYMAI. An 18-day-old female infant was admitted to the hospital because of macroglossia and recurrent hyperglycemia. In addition to the macroglossia, she also presented with large fontanelles, micrognathia, and prominent eyes. Serum glucose levels were 200-00 mg/dL and they improved spontaneously 2 days after admission. To identify the presence of a maternal methylated allele, bisulfite-treated genomic DNA from peripheral blood was prepared and digested with BssHII after polymerase chain reaction (PCR) amplification with methylation-specific HYMAI primers. PCR and restriction fragment length polymorphism analysis showed that the patient had only the paternal origin of the HYMA1 gene. TNDM is associated with a methylation defect in chromosome 6, suggesting that an imprinted gene on chromosome 6 is responsible for this phenotype.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.21 no.1
• /
• pp.15-21
• /
• 2021

Purpose: Urea cycle disorder (UCD) is an inherited inborn error of metabolism, acting on each step of urea cycle that cause various phenotypes. The purpose of the study was to investigate the long-term clinical consequences in different groups of UCD to characterize it. Methods: Twenty-two patients with UCD genetically confirmed were enrolled at Pusan National University Children's hospital and reviewed clinical features, biochemical and genetic features retrospectively. Results: UCD diagnosed in the present study included ornithine transcarbamylase deficiency (OTCD) (n=10, 45.5%), argininosuccinate synthase 1 deficiency (ASSD) (n=6, 27.3%), carbamoyl-phosphate synthetase 1 deficiency (CPS1D) (n=3, 13.6%), hyperornithinemia-hyperammonemia-homocitrullinuria syndrome (HHHS) (n=2, 9.1%), and arginase-1 deficiency (ARG1D) (n=1, 4.5%). The age at the diagnosis was 32.7±66.2 months old (range 0.1 to 228.0 months). Eight (36.4%) patients with UCD displayed short stature. Neurologic sequelae were observed in eleven (50%) patients with UCD. Molecular analysis identified 37 different mutation types (14 missense, 6 nonsense, 6 deletion, 6 splicing, 3 delins, 1 insertion, and 1 duplication) including 14 novel variants. Progressive growth impairment and poor neurological outcomes were associated with plasma isoleucine and leucine concentrations, respectively. Conclusion: Although combinations of treatments such as nutritional restriction of proteins and use of alternative pathways for discarding excessive nitrogen are extensively employed, the prognosis of UCD remains unsatisfactory. Prospective clinical trials are necessary to evaluate whether supplementation with BCAAs might improve growth or neurological outcomes and decrease metabolic crisis episodes in patients with UCD.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.2 no.1
• /
• pp.9-15
• /
• 2002

As architectural forms tend to be large-scaled, high-storied and complicated, use of computer for processing design information has been generalized. However, CAD use in the process of developing architectural design has been neglected greatly in the educational field of architectural field due to the surging of recognition that it may limit the essential property of architectural design. It may be resulted from the limitation of CAD system, that is, it is because of tardy speed of application development for the related areas with the lack of simplicity and clarity of flexibility to be secured on the drawing and user interface. Recent CAD systems, however, overcome such a limitation, convert into object-based design from entity-based drawing, drafting and modeling for implementing design concept of architects and it connects with internet linked to superspeed information communication network and changes process and stream of architectural design. Therefore, this study deals with utility of object based CAD system with products of Autodesk Co. and consequently obtain the following conclusions. First, it expands architect's design areas by supporting cooperative design system based on model-based architectural design and internet. Second, it reduces consumption of personal and material resources and time in the process of drawing production for improving architectural design works. Third, it can reduce the frequent design changes by improving understanding of architectural space with visualization of immediate 3D information, escaping from traditional methods to deliver design information to building owner through 2D drawing or model and perspective drawing requiring much cost and time. Fourth, it keeps exactness without omission or duplication of design information and generate and renew information of all related drawings on a drawing. Fifth, it is possible to change difficult and boring architectural design work into a pleasure owing to immediate modeling and drawing of design idea. In addition, digital drawing generated by using object-based CAD system can playa role of establishing Urban Information System to be used for protecting from building in disaster and urban disasters in connection with GIS numerical map and be used for reference of all kinds of information required fro post-management of buildings. However, what is more important is that surplus time from introduction of object-based CAD system should be used for consideration to be recognized as a good space and building built as a product of this project for comfort to urban people.

• Journal of Life Science
• /
• v.27 no.11
• /
• pp.1369-1375
• /
• 2017

The purpose of this study was to investigate the cellular characterization of phospholipase C-${\delta}1$ in olive flounders (Paralichthys olivaceus). In general, phospholipase C signaling pathways are distributed in nuclei at plasma membranes and in cytoplasms, although the pathways' nuclear localization mechanisms are unclear. P. olivaceus duplicates type-A PoPLC-${\delta}1$ (PoPLC-${\delta}1A$), which has a high similarity to the human isoform PLC-${\delta}$; type-B PoPLC-${\delta}1$ (PoPLC-${\delta}1B$ [Sf]), which has a low similarity to the human isoform PLC-${\delta}$ and the alternative splice variant PoPLC-${\delta}1B$ (Lf), which has a nuclear localization signal (NLS) and a nuclear export signal (NES) for nuclear imports and exports, respectively. This study confirmed the effects of the cellular localization and translocation of GFP-tagged PoPLC-${\delta}1A$, PoPLC-${\delta}1B$ (Sf) and PoPLC-${\delta}1B$ (Lf). It administered treatments of $Ca^{2+}$ ionophore ionomycin and endoplasmic reticulum (ER)-$Ca^{2+}$ pump inhibitor thapsigargin to hirame natural-embryo (HINAE) cells. A laser-scanning confocal microscope was used. GFP-tagged PoPLC-${\delta}1A$ was distributed to the cellular organelles, rather than to the cytoplasms and cytomembranes, when PoPLC-${\delta}1B$ (Lf) and PoPLC-${\delta}1B$ (Sf) were localized at the plasma membranes. The treatments of ionomycin and thapsigargin showed the accumulation of PoPLC-${\delta}1A$ in the nuclei when PoPLC-${\delta}1B$ (Lf) nucleocytoplasmic shuttling and PoPLC-${\delta}1B$ (Sf) nucleocytoplasmic shuttling were not observed. The results were the first evidence that PoPLC-${\delta}1A$, which contains functional, intact NES sequences, has a main role in nucleocytoplasmic shuttling and translocation in fish.