• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.560-574
• /
• 2016

This paper presents a novel method for power system harmonic estimation based on the Park transform. The proposed method firstly extends the signal to a group of three-phase signals in a-b-c coordinate. Then, a linear fitting based method is adopted to estimate the fundamental frequency. Afterwards, the Park transform is utilized to convert the three-phase signals from a-b-c coordinate to d-q-0 coordinate. Finally, the amplitude and phase of a harmonic component of interest can be calculated using the d-axis and q-axis components obtained. Simulation studies have been conducted using matrix laboratory (MATLAB) and power system computer aided design/electromagnetic transients including direct current (PSCAD/EMTDC). Simulation studies in MATLAB have considered three scenarios, i.e., no-frequency-deviation scenario, frequency-deviation scenario and the scenario in the presence of inter-harminics. The results have demonstrated that the proposed method achieves very high accuracy in frequency, phase and amplitude estimation under noisy conditions, and suffers little influence of the inter-harmonics. Moreover, comparison studies have proved that the proposed method is superior to FFT and Interpolated FFT with the Hanning Window (IpFFTHW). Finally, a popular case in PSCAD/EMTDC has been employed to further verify the effectiveness of the proposed method.

• 전기전자학회논문지
• /
• 제19권3호
• /
• pp.335-341
• /
• 2015

최근 들어 철강의 두께 제어를 위해 고정밀도의 절대 위치 검출 센서에 대한 필요성은 증가하고 있다. 열악한 공장 환경 하에서 직선 운동하는 실린더의 절대 위치를 측정하기 위해서는 LVDT가 널리 사용된다. 본 논문에서는 1 미크론의 고해상도를 가지는 3상 LVDT 및 L/D (LVDT to digital) 변환기를 구현하였다. 이를 위하여 첫째 U, V, W 3상 정현파에 대한 시그널링을 FPGA로 설계하였다. 둘째 위치 정보에 대한 A상, B상 펄스 파형 출력 알고리즘을 구현하였다. 마지막으로 성능 평가를 위하여 기존의 센서들과 비교하였다. 실험 결과 직선성 편이 오차는 0.009788 [mm] 로써 2.2% 향상된 결과를 얻었고 정현파의 왜곡률은 평균 0.0751%로 기존보다 33%의 향상된 결과를 얻어 우수한 센서임을 입증하였다.

• 한국의류산업학회지
• /
• 제12권4호
• /
• pp.467-476
• /
• 2010

The purpose of this study was to develop a plausible methodology based on experimental data how to set up darts and split lines on 3D parametric body dressed with tight-fit garment. The results were as following: Through the process of making convex hull, the concave parts were straightened to make a convex hull, especially in the center part of bust, under breast part and scapular part. To figure out the optimum positions of darts and split lines, the inflection points of curve ratio were searched along the horizontal polylines of waist and bust. This procedures produced reliable results with low deviation. Using Rapidform, CATIA and Unigraphics, six patches of bodice patterns were drawn and aligned. Paired t-test results showed the outline and area between 3D surface and 2D were not significantly different, meaning this method could be adaptable when flattening 3D surfaces. The amount of waist dart measured on the pattern showed that the highest portion was allocated on 2nd dart(back), followed by 1st dart(back), 1st dart(front), 2nd dart(front)/side dart, and center back dart. A series of findings suggested that curve ration inflection point could be used as a guide to set up darts and split line on 3D parametric model with low deviation.

• 한국잠사곤충학회지
• /
• 제3권
• /
• pp.61-67
• /
• 1963

본보의 목적은 현재 우리나라에서 장려품종으로 지정된 잠품종 3종과 시험도중에 있는 잠품종 2종을 재료로 하여 그 견계섬도의 변이가 생계섬도편차에 미치는 영향을 조사하여 생계제조전에 원료견만으로서 생계섬도편차를 평가하여 운영계획에 과학성을 유지하게 하는데 있고 다음과 같은 결론을 얻었다. 1. 교잡종견의 견계섬도변이는 정립조건으로 볼때 P$_{k}$ $\times$ S$_{n}$은 21 중용견으로 가장 적합하다. 그러나 입촌수가 8립으로 되기 때문에 능률에는 지장이 있을 것이고 생계촉감면으로는 다른 품종보다우수하다. 2. 백두$\times$금강 및 묘향$\times$청천은 21 중용견으로서 능률위주의 원료견이다. 3. 설악$\times$소양은 14중, 및 28 중용견으로서 적합하다. 4. 묘향$\times$청천은 생계섬도편차입장으로 볼 때 이용가치가 희박하다. 5. 원료견의 평균견계섬도와 종합견계섬도표준편차간에는 소야씨의 실험을 재확인하는 동시에 밀접한 상관관계가 있었다. 6. 우리나라 산견의 원료견 평균섬도조사만으로 생계섬도편차를 중수별로 도표에 의해 추정할 수 있는 도표를 작성하였다. 7. 동시에 목적섬도에 따라 획득할 수 있는 최고등급표도 작성하였다. 8. 본보고에 사용한 견품종별 견사섬도변이가 생계섬도 및 등급에 미치는 영향은 제오표와 같다. 9. 현재 한국생계 21 중의 섬도편차성적은 평균 1.25D인 바 상기 표의 평균치와 합치하고 있다. 단지 그편차분포를 향상시킬 필요가 있다.다.

• 한국전자파학회논문지
• /
• 제19권5호
• /
• pp.523-532
• /
• 2008

본 논문에서는 RFID 시스템의 안정적인 구동을 위하여 등방성 복사 특성을 가지는 U-형태의 RFID 태그 안테나를 제안하였다. 태그 안테나는 복사부에 해당하는 U-형태의 반파장 다이폴 본체와 사각 형태의 급전부가 결합된 구조이다. 태그 칩과의 공액 정합이 용이하게 하기 위해 급전부 하단 중앙에 상용 태그 칩을 부착하여 U-형태의 본체에 연결하였다. 또한, U-형태의 태그 안테나의 본체 하단 중앙을 직사각형 슬릿을 만들어 이득 편차 특성을 개선하였다. 두 구조의 태그 안테나는 VSWR<2를 기준으로 국내에 할당된 UHF 주파수 대역인 $908.5{\sim}914$ MHz를 수용하였으며, VSWR<2 대역폭 안에서 슬릿이 없는 경우 1.63 dB 이하의 이득 편차 특성을, 슬릿이 있는 경우에는 0.74 dB 이하의 이득 편차 특성을 가졌다. 또한, VSWR<5.8 대역폭 안에서 슬릿이 없는 경우 3.8 dB 이하의 이득 편차 특성을, 슬릿이 있는 경우에는 1.2 dB 이하의 이득 편차 특성을 가졌다.

• 감성과학
• /
• 제14권4호
• /
• pp.653-662
• /
• 2011

최근 3D TV 보급과 확산에 따른 시각 피로문제가 대두되면서 시각 기능과 인지적 관점에서의 연구가 활발하다. 그러나 3D 시각피로가 자율신경계 기능에 미치는 영향에 대한 연구는 미비하다. 따라서 본 연구에서는 3D TV 시청으로 유발되는 3D 시각피로가 자율신경계 기능에 미치는 영향과 이 영향이 교감 및 부교감 신경계와 심혈관계 반응에 미치는 영향을 확인하고자 한다. 피험자는 20 대 남녀 대학생 15 명(남 6 명, 여 9 명, 평균나이 22.53 세 ${\pm}$ 2.55 세)을 대상으로 하였다. 피험자는 편안한 의자에 앉아 3D TV를 1시간 시청하였다. 3D TV 시청 전과 후의 1분간 맥파(PPG, Photo-PlethysmoGram)를 측정하였고 주관설문을 실시하였다. 측정된 신호에서 SDNN (standard deviation of RR intervals), RMS-SD(root mean square successive difference), HF/LF ratio, Ln(LF), Ln(HF)를 추출하여 교감 및 부교감 신경계, 그리고 심혈관계 반응을 확인 하였다. 연구 결과 HF/LF ratio, Ln(LF), Ln(HF)는 시청 후에 유의하게 감소하였고, SDNN, RMS-SD는 통계적 유의차를 확인할 수 없었다. 이 결과는 3D 시각피로가 자율신경계 기능에 영향을 미치고 이로 인해 교감신경계가 항진되는 반응이 나타나며, 심박 변화율이 감소하는 결과를 초래할 가능성을 확인 하였다.

• Journal of Photoscience
• /
• 제4권3호
• /
• pp.105-112
• /
• 1997

The fluorescence quenching of 2, 5-di-(5-tert-butyl-2-benzoxazolyl)-thiophene (BBOT) by aniline in five different solvents namely heptane, hexane, cyclohexane, dioxane and acetonitrile has been carried out at room temperature with a view to understand the quenching mechanisms. The experimental results show positive deviation in the Stern-Volmer plots in all the solvents. In order to interpret these results we have invoked the Ground state complex and sphere of action static quenching models. Using these models various rate parameters have been determined. The magnitudes of these parameters suggest that sphere of action static quenching model agrees well with the experimental results. Hence this positive deviation is attributed to the static and dynamic quenching. Further, with the use of Finite Sink approximation model, it was possible to check these bimolecular reactions as diffusion-limited and to estimate independently distance parameter R$^1$ and mutual diffusion coefficient D. Finally an attempt has been made to correlate the values of R$^1$ and D with the values of the encounter distance R and the mutual diffusion coefficient D determined using the Edward's empirical relation and Stokes-Einstein relation.

• 복식문화연구
• /
• 제16권3호
• /
• pp.502-517
• /
• 2008

The purpose of the study lies in the measurements of breast shapes and upper body types for the women in their 40's, with the use of 3D measurement system, and in the presentation of brassiere patterns fit for their body types. As for the study method, 3D human body types were analyzed with RapidForm 2006, and the upper-body types and breast shapes were statistically classified through technical statistics analysis, cluster analysis, t-test, variance analysis, and cross analysis. The wearing tests went through the comparison of the brassieres of three makers in the market and the experiment brassieres(first and second) and then the evaluations were made by the subjects, the outer appearance assessment by experts, and 3D measurements. The findings of the study indicated that the evaluation of experiment brassieres was excellent in every item, and he significant difference was found out particularly in the items of pressure, rear center, front center, breast underneath, adequate level by wing, and adequate level by armhole. According to the results of 3D evaluation, experiment brassieres had a highest point in fitness with no physical pressure at the wing part and no overall deviation at the cup art. The pattern comparison showed the differences in the parts of total cup angle, cup circumference length, lower cup height, wing length, and wing angle.

• 복식문화연구
• /
• 제16권3호
• /
• pp.488-501
• /
• 2008

The purpose of this study presents bra pattern using the 3D measurements of the upper body subject to women in their 30's. Brassieres available in the market are mostly designed for straight body shape and many women seem to have experienced bearing discomfort in a great extent as they grow older. Brassieres should be designed to cover diverse body types and the accurate measurement of body type and breast shape is needed to accomplish that. As for the study method, 3D human body types were analyzed with RapidForm 2006, and the upper-body types and breast shapes were statistically classified through technical statistics analysis, cluster analysis, t-test, variance analysis, and cross analysis. The wearing tests went through the comparison of the brassieres of three makers in the market and the experiment brassieres(first and second) and then the evaluations were made by the subjects, the outer appearance assessment by experts, and 3D measurements. The results of this study showed that the evaluation of experiment brassieres was excellent in every item, and the significant difference was found out particularly in the items of pressure, rear center, front center, breast underneath, adequate level by wing, and adequate level by armhole. According to the results of 3D evaluation, experiment brassieres had a highest point in fitness with no physical pressure at the wing part and no overall deviation at the cup part.

• 한국대기환경학회지
• /
• 제2권1호
• /
• pp.23-31
• /
• 1986

Meteorological Measurement was performed for evaluation of the horizontal vertical standard deviation $(\sigma_y, \sigma_z)$, surface roughness length and stmospheric stability during the period of March to October 1985 The major results are as follows; 1) The average value of surface roughness length was 144cm at NEPI. 2) In frequency distribution of atmospheric stability, neutral state (D class) was dominent in Seoul (29%) and Pusan (30%). Unstable states (A. B. C. class) were 26% in Seoul and 24% in Pusan. Also, stable states (D. E. F class) were 74% in Seoul and 76% in Pusan. 3) Standard deviations of horizontal ad vertical direction were evaluated as a function of downwind distance and atmospheric stability at NEPI, Jamsil and Pujeondong (Pusan). Standard deviation of horizontal direction was largest at NEPI among 3 areas because of mechanical turbulence resulting from difference of surface roughness length.