• Journal of Periodontal and Implant Science
• /
• 제44권4호
• /
• pp.184-193
• /
• 2014

Purpose: The aim of the present study was to evaluate the in vivo accuracy of flapless, computer-aided implant placement by comparing the three-dimensional (3D) position of planned and placed implants through an analysis of linear and angular deviations. Methods: Implant position was virtually planned using 3D planning software based on the functional and aesthetic requirements of the final restorations. Computer-aided design/computer-assisted manufacture technology was used to transfer the virtual plan to the surgical environment. The 3D position of the planned and placed implants, in terms of the linear deviations of the implant head and apex and the angular deviations of the implant axis, was compared by overlapping the pre- and postoperative computed tomography scans using dedicated software. Results: The comparison of 14 implants showed a mean linear deviation of the implant head of 0.56 mm (standard deviation [SD], 0.23), a mean linear deviation of the implant apex of 0.64 mm (SD, 0.29), and a mean angular deviation of the long axis of $2.42^{\circ}$ (SD, 1.02). Conclusions: In the present study, computer-aided flapless implant surgery seemed to provide several advantages to the clinicians as compared to the standard procedure; however, linear and angular deviations are to be expected. Therefore, accurate presurgical planning taking into account anatomical limitations and prosthetic demands is mandatory to ensure a predictable treatment, without incurring possible intra- and postoperative complications.

• 터널과지하공간
• /
• 제12권4호
• /
• pp.268-276
• /
• 2002

In this study, a 3D coordinate measurement system equipped with a laser displacement meter for digitizing rock joint surface was established and the digitized data were used to calculate several roughness parameters. The parameters used in this study were micro avenge inclination $angle(i_{ave})$, average slope of joint $asperity(SL_{ ave})$, root mean square of $i-angle(i_{rms})$, standard deviation of height(SDH), standard deviation of $i-angle(SD_i)$, roughness profile $index(R_P)$, and fractal dimension(D). The relationships between the roughness parameters based on the digitzation of the surface profile were analyzed. Since the measured value varied according to the degree of reflection and the variation of colors at the measuring point, rock joint surface was painted in white to minimize the influence of the surface conditions. The comparison of the measured values and roughness parameters before and after painting revealed the better consequence from measurement on the painted surfaces. Also, effect of measuring interval was studied. As measured interval was increased, roughness parameters were exponentially decreased. The incremental sequence of degree of decrease was $SDH\; i_{ave},\; i_{rms},\; SD_i,\;and\; R_ p-1$. As a result of comparison of parameters from pin-type measurement system and laser type measurement system, all value of parameters were higher when laser-type measurement system was used, except SDH.

• 융합정보논문지
• /
• 제11권7호
• /
• pp.189-194
• /
• 2021

어깨관절 컴퓨터 단층 검사 시 발생하는 노이즈 및 줄무늬 인공물에 있어 Boost3D 알고리즘 적용을 통해 노이즈 및 줄무늬 인공물 감소 효과를 알아보고자 하였다. 어깨관절이 포함된 흉부팬텀을 이용한 팬텀 연구와 2020년 9월부터 2020년 10월까지 어깨관절 컴퓨터단층검사를 실시한 35명에 대한 어깨관절 영상을 통해 임상 평가를 하였다. 평가는 Boost3D 알고리즘 적용 전 그룹과 후 그룹으로 나누어 노이즈 값, 신호 대 노이즈 비, 평균 대 표준편차 비 값을 분석하였다. 팬텀 영상 평가 및 임상 영상 평가에서 분석한 노이즈 값 및 평균 대 표준편차 비 값 모두 Boost3D 적용 후 그룹에서 통계적으로 유의하게 낮게 나타났다(p<0.05). 본 연구를 통해 Boost3D 적용을 통해 노이즈 및 줄무늬 인공물이 감소됨을 알 수 있었으며, 평균 대 표준편차 비 값이 높게 나타나 우수한 영상으로 판단할 수 있다. 어께관절 컴퓨터 단층 검사 시 Boost3D 알고리즘을 이용한다면 어깨관절 부위에서 발생할 수 있는 노이즈 및 줄무늬 인공물을 감소시킨 우수한 영상을 얻을 수 있을 것으로 생각된다.

• The Journal of Advanced Prosthodontics
• /
• 제14권3호
• /
• pp.150-161
• /
• 2022

PURPOSE. The purpose of the study was to assess the influence of build orientations and density of support structures on the trueness of the 3D printed removable partial denture (RPD) frameworks. MATERIALS AND METHODS. A maxillary Kennedy class III and mandibular class I casts were 3D scanned and used to design and produce two 3D virtual models of RPD frameworks. Using digital light processing (DLP) 3D printing, 47 RPD frameworks were fabricated at 3 different build orientations (100, 135 and 150-degree angles) and 2 support structure densities. All frameworks were scanned and 3D compared to the original virtual RPD models by metrology software to check 3D deviations quantitatively and qualitatively. The accuracy data were statistically analyzed using one-way ANOVA for build orientation comparison and independent sample t-test for structure density comparison at (α = .05). Points study analysis targeting RPD components and representative color maps were also studied. RESULTS. The build orientation of 135-degree angle of the maxillary frameworks showed the lowest deviation at the clasp arms of tooth 26 of the 135-degree angle group. The mandibular frameworks with 150-degree angle build orientation showed the least deviation at the rest on tooth 44 and the arm of the I-bar clasp of tooth 45. No significant difference was seen between different support structure densities. CONCLUSION. Build orientation had an influence on the accuracy of the frameworks, especially at a 135-degree angle of maxillary design and 150-degree of mandibular design. The difference in the support's density structure revealed no considerable effect on the accuracy.

• 대한두개안면성형외과학회지
• /
• 제20권1호
• /
• pp.31-36
• /
• 2019

Background: After closed reduction, patients are sometimes concerned that their external nasal shapes have changed. The aim of this study was to investigate and explain changes in nasal shape after surgery through objective photogrammetric anthropometry measurements taken through three-dimensional (3D) reformed computed tomography (CT) images. Methods: Our study included 100 Korean patients who underwent closed reduction of isolated nasal bone fracture from January 2016 to June 2017. Using the ruler tool in Adobe Photoshop CS3, we measured preoperative and postoperative nasal base heights, long nostril axis lengths, both nasal alar angles, and amount of nasal deviation through the 3D reformation of soft tissue via CT scans. We then compared the dimension of nose. Results: The amount of postoperative correction for nasal base height was 1.192 mm. The differences in nostril length between each side were found to be 0.333 mm preoperatively and 0.323 mm postoperatively. The differences in the nasal alar angle between each side was $1.382^{\circ}$ preoperatively and $1.043^{\circ}$ postoperatively. The amount of nasal deviation was found to be 5.248 mm preoperatively and 1.024 mm in postoperatively. Conclusion: After the reduction of nasal bone fractures, changes in nasal dimensions were noticeable in terms of nasal deviation but less significant in nasal tips, except for changes in nasal alar angles, which were notable.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권16호
• /
• pp.6929-6934
• /
• 2015

Background: Real life management of hepatocellular carcinoma occasionally deviates from guidelines for recommended therapy. Aims: To evaluate how frequent this deviation happens in our center and assess its impact on outcome. Materials and Methods: The treatment of 770 patients (87% males, mean age 57.8 years) was analyzed and the effect of deviation on outcome over 36 months was examined. Results: Of Barcelona Clinic liver cancer stages 0 and A patients, 65.8% received resection, ablation, liver transplantation or transarterial chemoembolisation for unresectable tumors more than 5 cm in diameter, and 34.2% received treatment recommended for later stages. Of stage B patients, 62.2% received recommended therapy, 34.3% of patients received supportive therapy or sorafenib and 3.5% received upward treatment stage migration. Among stage C patients, 7.6% received sorafenib, and most (79.2%) were given supportive care. Deviation from recommended therapy occurred in 34.2%, 37.7%, and 92.4% in stages 0-A, B and C. Survival of stage 0-A patients who received downwards treatment stage migration was lower than those who received recommended treatment (p <0.001). Upward treatment stage migration in stages B, C and D did not improve survival compared to those who received recommended treatment. Conclusions: Deviation from recommended therapy had a negative impact on survival in Barcelona Clinic liver cancer stage A patients.

• International journal of advanced smart convergence
• /
• 제6권4호
• /
• pp.88-95
• /
• 2017

The conventional scan methods are based on a laser scanner and a depth camera, which requires high cost and complicated post-processing. Whereas in photometric scanning method, the 3D modeling data is acquired through multi-view images. This is advantageous compared to the other methods. The quality of a photometric 3D model depends on the environmental conditions or the object characteristics, but the quality is lower as compared to other methods. Therefore, various methods for improving the quality of photometric scanning are being studied. In this paper, we aim to investigate the effect of illumination conditions on the quality of photometric scanning data. To do this, 'Moai' statue is 3D printed with a size of $600(H){\times}1,000(V){\times}600(D)$. The printed object is photographed under the hard light and soft light environments. We obtained the modeling data by photometric scanning method and compared it with the ground truth of 'Moai'. The 'Point-to-Point' method used to analyseanalyze the modeling data using open source tool 'CloudCompare'. As a result of comparison, it is confirmed that the standard deviation value of the 3D model generated under the soft light is 0.090686 and the standard deviation value of the 3D model generated under the hard light is 0.039954. This proves that the higher quality 3D modeling data can be obtained in a hard light environment. The results of this paper are expected to be applied for the acquisition of high-quality data.

• 대한한방체열의학회지
• /
• 제1권1호
• /
• pp.7-12
• /
• 2002

Cold hypersensitivity is excessive sensitivity of each body part, particularly limbs and low backs, but sometimes it affects upper abdomen region in G-I trouble patients. We conducted this research on 69 patients who came and took the both exam of gastroscopy and D.I.T.I. in Kangnam korean hospital Kyung Hee university. So, we researched the significance of temperature deviations on upper abdomen which was studied separately by gastritis group, digestive function group and H. pylori group. The result was : 1. The temperature deviation of Zhongwan(Ren12)-Danzhong(Ren17) of gastritis group was significant, it means that patients with severe gastritis have more significant cold hypersensitivity in upper abdomen than the patients who has not gastritis(p<0.005). 2. The temperature deviation of Zhongwan(Ren12)-Danzhong(Ren17) of indigestive patients in digestive function group was significant(p<0.05) 3. The temperature deviation of Zhongwan(Ren12)-Danzhong(Ren17) of H.pylori positive patients in H.pylori group was not significant. 4. The clinical relationship or tendency was not found both between H.pylori group and gastritis group and between H.pylori group and digestive function group.

• 대한전자공학회논문지
• /
• 제5권2호
• /
• pp.8-14
• /
• 1968

트란지스타 단일안정 멀티바이부래타(monostable multi-vibrator)와 시리콘턴넬 다이오드 (T.D)로써 구성된 전류파 파고변별기를 설계하여 그 특성을 조사하였다. 피측정 전류액의 범위는 50㎂-5.23mA이며, 이 범위에 있어서 측정된 최대비직선도는 ±0.75% 이었다. 이 변별기의 전류액 분해능은 T.D를 통하여 흐르는 편의전류에 따라서 약간 달라지며 역방향 편의전류가 3 mA 일때, 만일 5%의 과잉파고를 주용한다면 그 분해시간은 2μS이다. 다음에 이 변별기의 임계치 안정도는 주로 T.D의 턴넬전류의 최대치 1 의 안정도에 의하여 좌우되며 환경온도의 변화범위가 0℃∼50℃일때는 최대비직선도 즉 ±0.75T 보다 더큰 임계치변화는 관측되지 않았다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권2호
• /
• pp.151-159
• /
• 2005

The purpose of this study was to evaluate the nasal deviation in mandibular prognathism with mandibulo-facial asymmetry. There were 40 patients whose mandibular prognathism with/without facial asymmetry were treated with orthognathic surgery from March 2002 to October 2003. The Group A(n=20) had a mandibulo-facial asymmetry over 6mm menton deviation in cephalogram PA and the Group B(n=20) had a mandibular prognathism. The preoperative frontal photograph, cephalogram PA and three dimensionalcomputed tomography(divided in hard tissuse image and soft tissue image) of two group was evaluated NDA(nasal deviation angle) and MDA(mandibular deviation angle). The NDA was statistical difference between asymmetry Group A and symmetry Group B(p<0.01), and was deviated in affected side of asymmetry. The MDA were also statistical difference between Group A and Group B(p<0.01), however the measurements of MDA between the frontal photograph, 3D-CT and cephalogram PA were similar to each others. The low correlation of NDA between frontal photograph and cephalogram PA in Group A and B demonstrate that we couldn't assess nasal deviation in cephalogram PA. It could be concluded that patients with mandibulo-facial asymmetry have a nasal deviation and clinician must remember this fact when they assess and treat patients.