• International Journal of Human Ecology
• /
• v.12 no.1
• /
• pp.87-99
• /
• 2011

Purpose- The purpose of this study was to compare the fit of two prototype liquid cooled vests using a 3D body scanner and accompanying software. The objectives of this study were to obtain quantitative measurements of ease values, and to use these data to evaluate the fit of two cooling vests in active positions and to develop methodological protocol to resolve alignment issues between the scans using software designed for the alignment of 3D objects. Design/methodology/approach- Garment treatments and body positions were two independent variables with three levels each. Quantitative dataset were dependent variables, and were manipulated in 3x3 factorial designs with repeated measures. Scan images from eight subjects were used and ease values were obtained to compare the fit. Two different types of analyses were conducted in order to compare the fit using t-test; those were radial mean distance value analysis and radial distance distribution rate analysis. Findings- Overall prototype II achieved a closer fit than prototype I with both analyses. These were consistent results with findings from a previous study that used a different approach for evaluation. Research limitations/implications- The main findings can be used as practical feedback for prototype modification/selection in the design process, making use of 3D body scanner as an evaluation tool. Originality/value- Methodological protocols that were devised to eliminate potential sources of errors can contribute to application of data from 3D body scanners.

• International Journal of High-Rise Buildings
• /
• v.3 no.4
• /
• pp.311-323
• /
• 2014

This paper introduces recent applications of three-dimensional building/construction data modeling (3D) and building information modeling (BIM) to large-scale complex building construction projects in Japan. Recently, BIM has been utilized as a tool in construction process innovation through planning, design, engineering, procurement and construction to establish a front-loading-type design building system. Firstly, the background and introduction processes of 3D and BIM are described to clarify their purposes and scopes of applications. Secondly, 3D and BIM applications for typical large-scale complex building construction projects to improve planning and management efficiency in building construction are presented. Finally, future directions and further research issues with 3D and BIM applications are proposed.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.3
• /
• pp.11-17
• /
• 1993

An active diplexer can be realized by using a MESFET and 2-sections of asymmetrical coupled bandpass filter, where the admittance inverter parameters in equivalent circuit of asym- metrical coupled microstrip lines are given as a function of an fundamental design parameter of a bandpass filter. An experimental active diplexer was designed over 22 and 18 percent bandwidth centered at 9 GHz and 11 GHz respectively, and the design data was optimized by Super-Compact. The gain performance was $6.2\pm0.3$dB in each band of 8.3~9.6 GHz and 10.3~11.8 GHz The measured bandwidth of the active diplexer was closely matched to design data but measured gain was slightly lower (1.5 dB) than the designed value.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.8
• /
• pp.1244-1254
• /
• 2008

The purpose of this research is to compare the people’s attitude toward 3-D body scanning by their gender and age in order to provide the application of 3-D body scanning data for new services or products. This study collected questionnaire data from 442 Korean females and 258 Korean males who participated in the 3-D body scanning. The result of this study were as follows: 1. Most people had good feelings for 3-D body scanning. Male respondents were more dissatisfied than female, and teenagers had higher dissatisfaction rate than other age groups for the measurement garment. 2. 80.5% of all respondents had the intention for re-measurement of 3-D body scanning. Male respondents and teenagers had low intention for re-measurement. 3. For the use of 3-D body scanning data, 79.6% said "yes" for making avatar, and 88.3% agreed with the custom made clothes. There was no difference between gender and age for this question. The results of the study will demonstrate how clothing retailers and marketers can use the 3-D body scanning data.

• International Journal of Ocean System Engineering
• /
• v.2 no.4
• /
• pp.214-222
• /
• 2012

The shipbuilding process is changing due to changes in the development environment and technological requirements for military ships. This would also hold true for a submarine, because its shipbuilding process includes complicated design and construction conditions. System improvement efforts for the design and construction of military ships have continued with the goal of overcoming these conditions. At present, the Korea Navy is developing a 3,000 ton-class Korean type submarine, and its design is progressing by the introduction of a full 3D-ship CAD system. Although the 3D modeling system was introduced for effective design realization through the introduction of collaborative design and active utilization of M&S (modeling and simulation), the introduction effects are not yet generally obvious, according to the characteristics of ship design. The present paper discusses the collaborative environment for developing a submarine to enhance this. This paper proposes the architecture and data structure of a system for realizing collaborative design and discusses a case system developed on the basis of this.

• Journal of Korea Multimedia Society
• /
• v.15 no.3
• /
• pp.408-416
• /
• 2012

As increasing interests for cultural content, 3D restoration about the valuable traditional architectures is in progress, nowadays. Digital restoration is generally performed with using new IT technology and equipments such as 3D scanner. From the view points of making better use of the 3D data, the methodology for 3D restoration leaves much room for improvement. When using 3D scanner, it is possible to get precise 3D data for exterior of the building but huge data size and insufficient information for the wooden intra structure might be obstacles for using them as a source of various digital contents. In traditional wooden structure, the binding rules for corresponding architectural components are important factor for realizing the architectural culture at that times. In this paper, we develop a design tool and architectural components reflecting the wooden intra structure. Moreover, we propose a new 3D restoration method from the design tool, which is good for making contents offering useful information for processes of construction and binding rule in a real time just at a glance.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.07a
• /
• pp.107-109
• /
• 2016

본 연구는 사용자의 신체 맞춤형 3D 가상모델에 VR을 이용한 패션 코디네이션이 가능하도록 설계한 시스템을 제안한다. 특별히 사용자의 신체 각 부위의 정보에 따라 3D모델을 조정할 수 있으며 의상데이터는 3D asset Database에서 최적의 조건으로 선별되어 VR 환경에서 코디네이션이 가능하도록 설계되었다. 따라서 사용자에게 가장 적합한 의상 정보를 현실감 있게 제공하여 만족도를 높일 것으로 기대한다. 본 시스템은 온오프라인에서 모두 활용 가능하며 가상 패션쇼, 가상 디자인, 패션 교육 등에 연계 가능하다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.357-360
• /
• 2007

In the area of domestic construction industry, recently, standardization of construction. globalization of constructional and a building information arc required to advance increase productivity, shorten the term of works and reduce the cost of construction. The objective of this is to offer basic data of process new thesis and development for automated building equipment design system based on 3D CAD building information. This study contribute the development of automated Building equipment design system based on 3D which helps to conduct the equipment design handily and quickly.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.294-295
• /
• 2018

Nowadays, the construction industry utilizes 3D models in the designing process, on which research is being conducted to establish an automated system for project cost estimation in connection with information related to construction such as material unit costs and wages, beyond the level of design interference review and construction quantity estimation. In this process, the project cost is estimated in connection with unit price data after takeoff the quantity based on the 3D model attributes and data types. A way to reduce cost and risk would be first developing prototypes of some of essential buildings and works, comparing and validating the outcomes, and then extending to the whole scope, because estimates differ on the basis of the scope and level of 3D design models as well as the data accuracy. This study analyzes case studies of project cost estimation by computing the quantity on the basis of 3D model in the construction industry and explores methodologies and management measures applicable for estimating nuclear power plant construction project costs.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.1
• /
• pp.25-33
• /
• 2012

Ever since the local interior and architecture design industry adopted Digital fabrication modeling tool for its design operation in early 1990's, working environment has been changing. The Purpose of study is to analyze the digital Architecture fabrication modeling for digital design education in academy course. Digital Design Tools, Digital Space and Form, Digital Materiality and Digital Production. The Digital fabrication modeling is and important role in a traditional design process and digital design process. It is comprised of digital input devices(3D digitizer, 3D design tools) and digital output devices(cutting plotters, laser cut, CNC machines, 3D printers). Digital input devices can be shift a traditional design process to digital design process. Digital output devices are the principle of digital fabrication by CAD/CAM. Also, the result of this study provide the fundamental data for physical resources and digital design curriculum in KAAB.