• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.356-356
• /
• 2013

Monolithic 3D-IC는 현대 집적회로에서 interconnect로 인해 발생되는 여러 문제들을 해결하기 위해 새롭게 제시되고 있는 기술적 개념으로 구현 시 하위 소자 및 interconnet들에 영향을 주지 않는 저온공정이 필수적이다. 특히 germanium (Ge)은 낮은 녹는점 및 높은 캐리어 이동도 덕분에 3D-IC 구현 시 상위 소자의 channel 물질에 적합한 것으로 알려져 있다. 최근 이러한 Ge을 결정화하기 위해 solid phase crystallization (SPC), metal induced crystallization (MIC), laser annealing과 같은 결정화 방법들이 보고되고 있다. 현재까지 SPC 방법에 의해 얻어진 poly-Ge의 도핑농도 및 이동도와 같은 전기적 특성에 대한 분석은 수행된 바 있으나 3D-IC 공정에 적용이 가능한 MIC 기술을 통해 얻어진 poly Ge 필름에 대한 전기적 특성분석은 부족한 상황이다. 본 연구는 SPC 뿐만 아니라 MIC 방법을 통해 ${\alpha}$-Ge를 결정화시키고 얻어진 poly-Ge 필름의 전기적 특성을 XRD 및 hall effect measurement를 통해 분석하였다. 특히 일반적으로 Ge 내에서 p-type dopant로 동작을 하는 defect과 n-type dopant인 phosphorus 관계를 고려하여 여러 온도에서 SPC 및 MIC에 의해 얻어진 phosphorus doped poly-Ge 필름들의 전기적 특성을 분석하였다.

• Bulletin of the Korean Chemical Society
• /
• 제31권6호
• /
• pp.1669-1680
• /
• 2010

The phase-shifted version of the multichannel quantum-defect theory (MQDT) was reformulated by disentangling the interloper spectrum from the perturbed dense Rydberg series for a systems involving 2 closed and more than 1 open channel. The theory was applied successfully to Martins and Zimmermann's photoionization spectra of the Rydberg series Cu I $3d^9\;4s(^1D_2)\;nd^2G_{9/2}$ perturbed by the interloper, $3d^9\;4p^2\;^4F_{9/2}$, for which Cohen's 4 channel QDT had failed. The zero surface graphic of the perturbed Fano's asymmetry parameter q of the autoionization spectrum of dense Rydberg series by the interloper was determined by only two parameters for this system. It was used as a map to trace the transformation route of the 3 channel autoionization spectra to the 4 channel spectra when the channel coupling of the closed channels with a newly added open channel was turned on progressively.

• 한국융합학회논문지
• /
• 제8권3호
• /
• pp.169-176
• /
• 2017

주조의 공정으로는 왁스패턴(wax pattern), 매몰(Investment), 탈왁스(Dewaxing)와 소성(Curing), 주물(Casting)등으로 나눌 수 있으며, 이러한 공정이 하나라도 소홀하게 되면 좋은 결과를 얻을 수 없게 된다. 2000년 이후, 3D 프린터가 발전되고 사용 횟수가 증가하였으나, 왁스 방식보다 광경화수지 방식의 프린터를 선호함으로 그의 따른 주물 결함이 더 심해지고 있다. 이러한 결함을 해결하기 위해 기존 왁스방식의 주조 결함을 선행논문을 통해 제시하였고, 특히 광경화수지 방식의 결함은 매몰과 탈왁스, 탈수지와 소성에서 기존과 다른 차이를 보였다. 이에 주조 실험을 통해 결과를 제시 하였으며, 특히 기존 방식의 승온곡선이 아닌 광경화수지만의 승온곡선을 제시하였다. 마지막으로 다이렉트 주조가 되지 못하는 것을 분류하고 형틀(Mold)제작에 대하여 제시하였다. 이에 본 연구를 통해 3D 프린터를 사용하는 사용자 또는 광경화수지를 다이렉트로 주조하려는 이들에게 조금이나마 도움이 되고자 한다.

• 소성∙가공
• /
• 제19권3호
• /
• pp.173-178
• /
• 2010

A die cast impeller blade has been developed in the effort on cost reduction in marine equipment industry. The purpose of this work is to optimize the die casting process using Taguchi's design of experiment for minimizing the internal defect of the die cast impeller blade. The experiments were preformed using the numerical simulation based on the L18 orthogonal array. As a results, the internal defect size of the die cast impeller blade for optimal design was controlled less than 1mm.

• 한국임상수의학회지
• /
• 제33권6호
• /
• pp.332-339
• /
• 2016

Polycaprolactone (PCL) scaffold have been developed as an alternative to natural donor tissue to repair a large osteochondral defect. The objective of this study is to evaluate efficacy and biocompatibility of bilayer PCL scaffold implanted for osteochondral repair in rabbit. Twenty-two male New Zealand White rabbits were used in this animal experiment. Rabbits were divided into three groups. Experimental surgery was carried out under general anesthesia. Osteochondral defects (5 mm diameter and 5 mm deep) were made in the center of the patellar groove using a 5 mm diameter biopsy punch. In group I (3D plotting) and group II (salt-leaching), the scaffold was implanted using the press-fitted technique into the defect. In control group, after osteochondral defect was created, the defect was left without implant. After four and eight weeks, rabbits were sacrificed and the defects were evaluated by macro -and microscopical methods. There were not found animal death and severe inflammatory evidence during the experimental periods. There were no significant differences between the experimental groups in gross evaluation. However the group I scored significantly higher than group II at 8 weeks in histological evaluation (P < 0.05). The 3-D plotting PCL scaffold was more suitable method for reconstruction of osteochondral defect than a salt-leaching PCL scaffold.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제42권
• /
• pp.18.1-18.9
• /
• 2020

Background: Bone grafting has been considered the gold standard for hard tissue reconstructive surgery and is widely used for large mandibular defect reconstruction. However, the midface encompasses delicate structures that are surrounded by a complex bone architecture, which makes bone grafting using traditional methods very challenging. Three-dimensional (3D) bioprinting is a developing technology that is derived from the evolution of additive manufacturing. It enables precise development of a scaffold from different available biomaterials that mimic the shape, size, and dimension of a defect without relying only on the surgeon's skills and capabilities, and subsequently, may enhance surgical outcomes and, in turn, patient satisfaction and quality of life. Review: This review summarizes different biomaterial classes that can be used in 3D bioprinters as bioinks to fabricate bone scaffolds, including polymers, bioceramics, and composites. It also describes the advantages and limitations of the three currently used 3D bioprinting technologies: inkjet bioprinting, micro-extrusion, and laserassisted bioprinting. Conclusions: Although 3D bioprinting technology is still in its infancy and requires further development and optimization both in biomaterials and techniques, it offers great promise and potential for facial reconstruction with improved outcome.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.622-628
• /
• 2003

The purpose of this study is to evaluate the effect of local wall thinning on the collapse of elbow subjected to internal pressure and bending moment. Thus, the nonlinear 3D finite element analyses were performed to obtained collapse moment of elbow containing various wall thinning defects under two loading; modes (closing and opening modes) and defect locations (intrados and extrados). From the results of analyses, the influence of wall thinning defect on the global moment-rotation behavior of elbow was discussed, and the dependance of collapse moment of elbow on wall thinning depth, length, and circumferential angle was investigated under different loading mode and defect location.

• 반도체디스플레이기술학회지
• /
• 제19권2호
• /
• pp.26-30
• /
• 2020

In this paper, we studied the problem if the experiment number occurring in order to identify defect in scaffold. We need to change each of the 5 print factor to predict defect when printing disk type scaffold using FDM 3d printer. So then the number of scaffold print will be more than 100,000 times. This experiment number is difficult to perform in the field. In order to solve this problem, we have produced a prediction model based on machine learning multiple linear regression using print conditions and defect scaffold data for print conditions. The prediction model produced was verified through experiments. The verification confirmed that the error was less than 0.5 %. We have confirmed that satisfied within the target margin of error 5 %.

• Journal of Periodontal and Implant Science
• /
• 제48권3호
• /
• pp.182-192
• /
• 2018

Purpose: The purpose of the present study was to validate an experimental model for assessing tissue integration of titanium and zirconia implants with and without buccal dehiscence defects. Methods: In 3 dogs, 5 implants were randomly placed on both sides of the mandibles: 1) Z1: a zirconia implant (modified surface) within the bony housing, 2) Z2: a zirconia implant (standard surface) within the bony housing, 3) T: a titanium implant within the bony housing, 4) Z1_D: a Z1 implant placed with a buccal bone dehiscence defect (3 mm), and 5) T_D: a titanium implant placed with a buccal bone dehiscence defect (3 mm). The healing times were 2 weeks (one side of the mandible) and 6 weeks (the opposite side). Results: The dimensions of the peri-implant soft tissue varied depending on the implant and the healing time. The level of the mucosal margin was located more apically at 6 weeks than at 2 weeks in all groups, except group T. The presence of a buccal dehiscence defect did not result in a decrease in the overall soft tissue dimensions between 2 and 6 weeks ($4.80{\pm}1.31$ and 4.3 mm in group Z1_D, and $4.47{\pm}1.06$ and $4.5{\pm}1.37mm$ in group T_D, respectively). The bone-to-implant contact (BIC) values were highest in group Z1 at both time points ($34.15%{\pm}21.23%$ at 2 weeks, $84.08%{\pm}1.33%$ at 6 weeks). The buccal dehiscence defects in groups Z1_D and T_D showed no further bone loss at 6 weeks compared to 2 weeks. Conclusions: The modified surface of Z1 demonstrated higher BIC values than the surface of Z2. There were minimal differences in the mucosal margin between 2 and 6 weeks in the presence of a dehiscence defect. The present model can serve as a useful tool for studying peri-implant dehiscence defects at the hard and soft tissue levels.

• 비파괴검사학회지
• /
• 제34권1호
• /
• pp.10-17
• /
• 2014

A 3D model based on the finite element method (FEM) was built to simulate the infrared thermography (IRT) inspection process. Thermal contrast is an important parameter in IRT and was proven to be a function of defect parameters. Parametric studies were conducted on internal defects with different depths, thicknesses, and orientations. Thermal contrast evolution profiles with respect to the time of the defect and host material were obtained through numerical simulation. The thermal contrast decreased with defect depth and slightly increased with defect thickness. Different orientations of thin defects were detected with IRT, but doing so for thick defects was difficult. These thermal contrast variations with the defect depth, thickness, and orientation can help in optimizing the experimental process and interpretation of data from IRT.