• Nuclear Engineering and Technology
• /
• v.43 no.1
• /
• pp.45-62
• /
• 2011

The Korean nuclear industry is developing a thermal-hydraulic analysis code for safety analysis of pressurized water reactors (PWRs). The new code is called the Safety and Performance Analysis Code for Nuclear Power Plants (SPACE). The SPACE code adopts advanced physical modeling of two-phase flows, mainly two-fluid three-field models which comprise gas, continuous liquid, and droplet fields and has the capability to simulate 3D effects by the use of structured and/or nonstructured meshes. The programming language for the SPACE code is C++ for object-oriented code architecture. The SPACE code will replace outdated vendor supplied codes and will be used for the safety analysis of operating PWRs and the design of advanced reactors. This paper describes the overall features of the SPACE code and shows the code assessment results for several conceptual and separate effect test problems.

• 전자공학회논문지 IE
• /
• v.44 no.2
• /
• pp.14-20
• /
• 2007

This paper presents quaternary D flip-flop with advanced performance. Quaternary D flip-flop is composed of the components such as thermometer code output circuit, EX-OR gate, bias inverter, transmission gate and binary D flip-flop circuit. The designed circuit is simulated by HSPICE in $0.35{\mu}m$ one-poly six-metal CMOS process parameters with a single +3.3V supply voltage. In the simulations, sampling frequencies is measured around 100MHz. The PDP parameters and FOM we estimated to be 59.3fJ, 33.7 respectively.

• Nuclear Engineering and Technology
• /
• v.38 no.2
• /
• pp.147-154
• /
• 2006

Thermal fatigue of the coolant circuits of PWR plants is a major issue for nuclear safety. The problem is especially accute in mixing zones, like T-junctions, where large differences in water temperature between the two inlets and high levels of turbulence can lead to large temperature fluctuations at the wall. Until recently, studies on the matter had been tackled at EDF using steady methods: the fluid flow was solved with a CFD code using an averaged turbulence model, which led to the knowledge of the mean temperature and temperature variance at each point of the wall. But, being based on averaged quantities, this method could not reproduce the unsteady and 3D effects of the problem, like phase lag in temperature oscillations between two points, which can generate important stresses. Benefiting from advances in computer power and turbulence modelling, a new methodology is now applied, that allows to take these effects into account. The CFD tool Code_Saturne, developped at EDF, is used to solve the fluid flow using an unsteady L.E.S. approach. It is coupled with the thermal code Syrthes, which propagates the temperature fluctuations into the wall thickness. The instantaneous temperature field inside the wall can then be extracted and used for structure mechanics computations (mainly with EDF thermomechanics tool Code_Aster). The purpose of this paper is to present the application of this methodology to the simulation of a straight T-junction mock-up, similar to the Residual Heat Remover (RHR) junction found in N4 type PWR nuclear plants, and designed to study thermal striping and cracks propagation. The results are generally in good agreement with the measurements; yet, in certain areas of the flow, progress is still needed in L.E.S. modelling and in the treatment of instantaneous heat transfer at the wall.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.3
• /
• pp.345-356
• /
• 2013

Numerical simulation on rock cutting by a TBM disc cutter was carried out using SPH (Smoothed Particle Hydrodynamics) code. AUTODYN3D, a commercial software program based on finite element method, was used in this study. The three-dimensional geometry of a disc cutter and a rock specimen were modeled by Lagrange and SPH code respectively. The numerical simulation was carried out for Hwangdeung granite for 10 different cutting conditions. The results of the numerical simulation, i.e. the relation between cutter force and failure behavior, had a good agreement with those from LCM test. The cutter forces measured in the numerical simulation had 10% deviation from the LCM test results. Moreover, the optimum cutter spacing was almost identical with the experimental results. These results indicate that SPH code can be successfully used had applicability for simulation on rock cutting by a TBM disc cutter. However, further study on Lagrange-SPH coupled modelling would be necessary to reduce the computation time.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3543-3562
• /
• 2021

The methods and performance of a 3D pin-by-pin neutronics code based on the 2D/1D decoupling method are presented. The code was newly developed as an effort to achieve enhanced accuracy and high calculation performance that are sufficient for the use in practical nuclear design analyses. From the 3D diffusion-based finite difference method (FDM) formulation, decoupled planar formulations are established by treating pre-determined axial leakage as a source term. The decoupled axial problems are formulated with the radial leakage source term. To accelerate the pin-by-pin calculation, the two-level coarse mesh finite difference (CMFD) formulation, which consists of the multigroup node-wise CMFD and the two-group assembly-wise CMFD is implemented. To enhance the accuracy, both the discontinuity factor method and the super-homogenization (SPH) factor method are examined for pin-wise cross-section homogenization. The parallelization is achieved with the OpenMP package. The accuracy and performance of the pin-by-pin calculations are assessed with the VERA and APR1400 benchmark problems. It is demonstrated that pin-by-pin 2D/1D alternating calculations within the two-level 3D CMFD framework yield accurate solutions in about 30 s for the typical commercial core problems, on a parallel platform employing 32 threads.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.2
• /
• pp.17-22
• /
• 2004

In this paper, a concatenated RS and Turbo code is proposed for OFDM system over burst error channel. The concatenated code used in this study is a RS(255,202) code and a rate 1/2 turbo code. The turbo code uses 2 recursive systematic convolutional (RSC) code as the constituent codes and the parity bit are punctured to get the desired code rate. It is shown by simulation that the conventional OFDM system fails when there exists burst noise. The concatenated RS and turbo code obtains at least 5dB gain over the turbo code at the bit error probability of 10/sup -3/.

• Fashion & Textile Research Journal
• /
• v.20 no.3
• /
• pp.353-359
• /
• 2018

In this study, fused deposition modellig(FDM) 3D printing technology has been applied directly to polyester voil fabric to produce 3D printed lace/voil composite fabrics. A stereolithograpy(STL) file with a lace type 3D modelling under the various thickness were prepared and transformed into a g-code file using a g-code generator. The extrusion conditions for FDM 3D printing were controlled by 50mm/s of nozzle speed, $235^{\circ}C$ of nozzle temperature, $40^{\circ}C$ of heating bed temperature. 3D printed lace/voil composite fabriscs manufactured by 3D printing based on FDM using a thermoplactic polyurethane(TPU) filaments were obtained. To evaluate the mechanical properties and washability of the fabricated 3D printed lace/voil composite fabric, KES-FB system test, washing fastness test and dry cleaning resistance test were conducted. As 3D printing thickness increased, KOSHI, NUMERI, and FUKURAMI of 3D printed lace/voil composite fabric increased. From the results of the primary hand value test, 3D printed lace/voil composite fabrics were confirmed to be applicable to women's summer garments. As a result of the washability and dry cleaning resistance test of the 3D printed lace/voil composite fabrics, all samples were graded 4-5.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.86.2-86.2
• /
• 2014

We present a new ray-tracing code, "Odyssey", for the Kerr spacetime accelerated by the Graphics Processing Unit (GPU). Taking advantage of the ability of nVidia graphic cards to evaluate trajectories of a large amount of photon simultaneously, the code is two orders of magnitude as fast as the previous CPU-based code corresponding to the speed of few nanoseconds per photon per time step. In the light of the Graphic User Interface (GUI) powered by the GPU-enhanced 2D/3D displaying technique, DirectX, it is feasible for users to manipulate diverse results such as rotating and zooming in/out the trajectories of photon instantly near the black hole. Thus the Odyssey can serve as a tool not only for scientific but also for the educational purpose. We discuss possible applications in detail in light of several results such as the shape of the silhouette of a black hole, the shape of a hot spot orbiting a black hole, and 3D photon trajectories.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.11
• /
• pp.538-543
• /
• 2006

A high-Power continuous-wave (CW) ten-vane double-strapped magnetron oscillator has been investigated using three-dimensional (3D) particle-in-cell (PIC) numerical simulation code, MAGIC3D. The resonant modes and their resonant frequencies of the ten-vane strapped magnetron resonator were obtained to show a large mode separation near the ${\pi}$-mode. An electron cloud formed in an anode-cathode gap, called an interaction space was confined well enough to result in no leakage current. Five spokes were clearly observed in the electron cloud, which definitely ensured the ${\pi}$-mode oscillation in the ten-vane magnetron. Numerical simulations predicted that the saturated microwave output power measured at the coaxial output port was 5.41 kW at the microwave frequency of 893 MHz, corresponding to a power conversion efficiency of 72.6% when the external axial magnetic field was 1150 gauss and the electron beam voltage and current were 6 kV and 1.25 A, respectively.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.05a
• /
• pp.72-74
• /
• 2019

Hadoop은 대용량 데이터의 분산 처리 응용을 지원하는 프레임워크이다. 이는 마스터 노드와 데이터 노드간에 Map-Reduce 과정을 거쳐 분산 처리를 지원한다. 이에 본 연구에서는 3D 프린팅을 위해 생성한 3D 모델을 프린터가 인식할 수 있는 G-code로 변환하는 작업을 Hadoop에서 수행하였다. 3D 모델은 대개 2차원 개체(페이셋)를 이용하여 표면을 표현하는데, 이 개체를 높이(Z 축)에 따라 슬라이싱한 후각 레이어별로 G-code를 생성하여야 한다. 우선 5대의 컴퓨터에 Hadoop 클러스터를 설치한 후, 대상 3D 모델에 다양한 속성값을 변경하면서 변환작업을 진행하여 Hadoop 프로그래밍의 장점을 확인할 수 있었다.