• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.1
• /
• pp.63-76
• /
• 2015

This study conducted a survey to gauge the buying and wearing propensities of wearers of leg guards made for baseball catchers, as well as product characteristics of preferred leg guards. Data from the survey were analyzed to obtain basic data for the development of an advanced leg guard design. Degree of compression, horizontal distance, cross section view and outline 3D sketch were also analyzed from the 3D data of leg guards; in addition, mobility and kinematic analysis were conducted through a wearing test. The survey indicated that imported products dominate the current retail market because they are appreciated by customers in terms of fit, price, brand, and protection. Representative complaints of products were discomfort, pressure, and the heavy-weight of the leg guards in general attributed to overall structure and 3D shape. When the pressure was lower on the front area of knee, it feels better to wear and the average knee angular velocity during the up and down motion increased, which suggests a better design from a kinematic point of view. The knee is the primary part of the body responsible for any movement of the lower limbs; consequently, the degree of compression and support stability of the leg guards near the knee area are important factors to evaluate the performance of leg guards. The results of our study indicate significant opportunities for improvement in product design and the development of baseball leg guards along with an ergonomic design that considers the mobility of the knee, skin deformations is necessary to improve performance. The process followed in this study will be applicable to studies on other personal protective equipment for sports.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.1
• /
• pp.53-67
• /
• 2020

The purpose of this study is to analyze the foot shape and size specification of male high school students. 3D modeling programs such as 'Artec Studio', 'CATIA', and 'Auto CAD' measured the 3D scan data of 361 male high school students provided by KATS. Through principal factor analysis, 10 factors were extracted, including foot length, medial-lateral ratio, and foot length ratio. As the result of the cluster and ANOVA with post-hoc test (Duncan method), the differences among types were clarified. Type 1 (24.7%) represented outward medial-lateral ratio (M-L ratio) with the lowest instep, ankle and little deformed first toe. Type 2 (41.8%) was characterized by the shortest, even M-L ratio, thin ankle and heel, the highest instep and ankle. Type 3 (33.5%) showed the longest, inward M-L ratio, thick ankle and heel, and deformed first toe. As the cross-tabulation of foot length and ball circumference, 17.2 percent was not covered by KS standard; in addition, the foot length was longer than the KS standard. The correlation analysis of key dimensions showed that foot length and ball circumference were highly correlated with other items; therefore, regression equations were derived to estimate other foot measurements using these two items as independent variables.

• The Research Journal of the Costume Culture
• /
• v.28 no.3
• /
• pp.299-312
• /
• 2020

The purpose of this study is to create a shirt sloper suitable for an elderly male body shape by producing virtual models using a 3D-virtualization program, making a torso prototype using the Yuka CAD system, and employing 3D simulation to virtualize and calibrate the model. First, the following three types of obese dummies are implemented through the CLO 3D program: Type 1 exhibits body fat in the lower body; Type 2 exhibits an obese abdomen; and Type 3 displays a balanced form of obesity. Second, for the design of the shirt pattern, the waist back length (measured value+1), back armhole depth (C/10+12+3+0.5~1.5), front armhole depth (back armhole depth 0~1), front interscye (2C/10-1+0.5-0.5), armscye depth (C/10+2+3.5+ 0.5), back interscye (2C/10-1+1), front chest C (C/4+2.5+1), back chest C (C/4+2.5-1), front hem C (C/4+2.5+1(+2)), back hem C (C/4+2.5-1(+2)), cap height (AH/3-5), and biceps width (Front AH-1, Back AH-1) are calculated. Third, the virtual attachment of the shirt pattern is resolved by increasing the front and back armhole depths, and the front and rear wrinkles are improved by adding a back armhole dart. The front hem lift and lateral pull caused by the protrusion of the abdomen are amended by increasing the margin of the chest, waist C, and hip C, with the appearance improved by balanced margin distribution in the front, back, and side panels. The improved retail pattern with an increase in the front armholes C was balanced on the torso plate.

• Journal of Fashion Business
• /
• v.25 no.5
• /
• pp.88-98
• /
• 2021

In this study, the characteristics of digital anthropometric methods were determined with case studies. These methods were broadly classified into two categories: non-wearable and wearable. Then, these categories were further classified into four types: 3D Scanning, mobile app, smart clothing, and smart tool Among the non-wearable types, the "3D scanning" technique was based on the use of 3D hardware equipment. With this technique, the body shape was measured and the internal body information was obtained. Therefore, it is used in fields of healthcare and fitness. Among the wearable types, "Smart clothing" involves a special clothing that measures human body and a smartphone application. Both the components are linked to a fashion platform, which is based on the measured sizes that help shoppers. The "Smart tool" has the characteristic of measuring only with smart tools and smartphone applications; it does not involve the measurement of images. The common advantage of digital anthropometric methods are as follows: they reduce the time and cost of measurement by enabling self-measurement. Moreover, simple measurements are used to determine the size of anthropometry. Thereafter, it accumulates this data to track the continuous changes in size. From an industrial point of view, digital anthropometric technology should be used to increase sales. The on-demand market can be expanded as global consumers would throng the Korean fashion market. For the consumer, an avatar should be created to fit the user's size. This would provide a fun experience to the user.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.4
• /
• pp.93-106
• /
• 2023

The study is to develop and present a leggings pattern that is suitable for the human body by using a standard body type avatar for a female in her 30s. As a research method, the average body type was selected from adult women in their 30s, and the appearance was evaluated using the CLO software program. The data analysis of this study compared the dimensions and shape of each part by legging. The leggings pattern suggested based on the above research results was determine to be a total length of 80.6cm and hip length of 24cm, and the knee length was set by dividing the legging in half from the waist to the hem and then adding 5cm. These figures were evaluated higher than Company D in terms of the adequacy of the upper part of the front and rear plates of Company A as well as the adequacy of the knee lines. Company A's figures were applied and corrected. For the front plate, the waist circumference was divided by 4, and 3.5cm was removed, and the hip circumference was set by dividing the hip circumference by 4, and 3.8cm was removed. In the appearance evaluation results Company D was highly evaluated in the suitability evaluation of the waist and hips, and the waist and hips were set using the pattern of Company D. The length of the front panel was modified by dividing the hip circumference by 4 and adding 1.8cm to the length, and the length of the back panel was modified by dividing the hip circumference by 3 and adding 8cm after dividing the hip circumference by 0.8cm.

• Journal of Biosystems Engineering
• /
• v.28 no.1
• /
• pp.65-76
• /
• 2003

The analysis of cow body parameters is important to provide some useful information fur cow management and cow evaluation. Present methods give many stresses to cows because they are invasive and constrain cow postures during measurement of body parameters. This study was conducted to develop the stereo vision system fur non-invasive analysis of cow body features. Body feature parameters of 16 heads at two farms(A, B) were measured using scales and nineteen stereo images of them with walking postures were captured under outdoor illumination. In this study, the camera calibration and inverse perspective transformation technique was established fer the stereo vision system. Two calibration results were presented for farm A and fm B, respectively because setup distances from camera to cow were 510 cm at farm A and 630cm at farm B. Calibration error values fer the stereo vision system were within 2 cm for farm A and less than 4.9 cm for farm B. Eleven feature points of cow body were extracted on stereo images interactively and five assistant points were determined by computer program. 3D world coordinates for these 15 points were calculated by computer program and also used for calculation of cow body parameters such as withers height. pelvic arch height. body length. slope body length. chest depth and chest width. Measured errors for body parameters were less than 10% for most cows. For a few cow. measured errors for slope body length and chest width were more than 10% due to searching errors fer their feature points at inside-body positions. Equation for chest girth estimated by chest depth and chest width was presented. Maximum of estimated error fur chest girth was within 10% of real values and mean value of estimated error was 8.2cm. The analysis of cow body parameters using stereo vision system were successful although body shape on the binocular stereo image was distorted due to cow movements.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.11
• /
• pp.1779-1785
• /
• 2010

The experiment is designed to create some useful data on the dressed shapes that contribute to simulating the adaptability of clothes. We studied the dressed shapes of blouse with above-elbow sleeves and sleeveless according to five types of arm movement (basic posture, reach forward 45, 90, and reach lateral 45, 90) in the stand-posture. Experiments were conducted to understand the dressed shape through 3-D measurement Vivid 910 and to investigate the width, depth, area distribution and gap of the shape of blouses on the section map with a software program for 3-D shape analysis, Rapid Form 2004. The Data were analyzed by factor analysis. The results of this study are as follows: The ratio of depth per width in the stand-posture was lower than other arm movements and the reach lateral was higher than the reach forward. The gap of the upper body was a briefed 4 factor; front, front-side, back, and back-side. It was higher than the sleeveless with a change of the gap in the dressed blouse with above-elbow sleeves by arm movements per stand-posture. The divisional gap shows the adaptability of clothes according to the types of blouse and arm movements in the change of the ratio.

• Journal of Fashion Business
• /
• v.26 no.6
• /
• pp.32-46
• /
• 2022

The purpose of this study is to explore a three-dimensional (3D) simulation of skirt shape concepts by manipulating circumferences and lengths via parametric design in the fashion design concept stage. This study also intends to propose a modeling method that can judge and transform the shape through immediate parameter adjustment. We looked at cases that utilized parametric design in other fields of fashion design, reviewed and analyzed the variables used in each study, and constructed parameters suitable to implement skirt fashion design. The traditional design elements required for skirt design, namely waist and hip circumferences, were set as variables in this study. The parametric design was developed to generate ideas of two skirt silhouettes (tight and flared) and three lengths (mini, knee-length, and maxi). To apply the skirt design implemented through variables to the actual 3D human shape, the shape data of women in their 20s and 30s were randomly selected from the 5th human data of Size Korea. Skirt design silhouette modeling was performed by adjusting the variable values according to body type. Parametric design has the potential to help develop design ideas in the field of fashion design, considering the method and characteristics of parameters of the variety of variables and rapid modification. Furthermore, if systematic research on variables and options among fashion design elements is conducted, the possibility of converging them into customization or co-design fashion design processes could be confirmed.

• Journal of Fashion Business
• /
• v.20 no.4
• /
• pp.189-206
• /
• 2016

A breast model was for the human body was devised by studying a body scan and human body index of a desirable breast type. Thus, when manufacturing various 3D models, these results can accordingly become a fundamental basis for realizing a desirable breast model. This study aims to provide a basic data for designing the cup patterns of brassieres in order to improve the function and wearing comfort. The comfort of three kinds of brassieres were compared: one manufactured by the actual measured size; another manufactured as per the ratio of desirable upper and lower breast lengths; and the third manufactured by the 3D model attained by the desirable human body ratio. In this study, we suggest a process for realizing the desirable breast model using the ratio of bust breadth and waist front length, which are the components for deciding the appropriate position and size of breast, and which are easy to measure. The ideal breast shape is an equilateral triangle formed by connecting the nipple with the center of the clavicle. After deciding the interval between the nipples, this value can be used to configure the locations of nipples by drawing a tangent, with equal length, from the anterior neck point (which is the center of clavicle) to the nipple. Also, since inside points of breast do not exist, the outer point of breast, upper point of breast, and below point of breast on the same plane, and the depths from the nipple point to the respective points, are applied to simulate a 3D image, by modifications along the x, y, and z axes. Depending on the type of breast, the length from the center of shoulder to the nipple, the diameter of breast, upper length of breast, and the position of nipple, are different. In conical or protruding breast, the wearing sensation is better when the nipple point of brassiere was lifted, by modifying the upper and lower lengths of breast. Considering the wearing sensation and function of a brassiere, it was better to leave the wearer's size as it is and use a pad within the same cup, rather than increase the basal area of the breast in order to increase the volume.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.578-585
• /
• 2000

Geometrical characteristics of fresh red pepper(Capsicum annuum L.) were measured and indexed to define some important geometrical characteristics, and malformation of body and fruit stalk which are necessary for the design of the equipments for cutting, spreading and alignment of red pepper in developing a fruit stalk remover of fresh red pepper. The effects of bending of body and fruit stalk on the equipments of cutting, spreading and alignment were studied. The maximum lengths of some parts of fresh red pepper were found to be 180 mm, 125 mm, 144 mm, 67 mm and 76 mm for the body, the bent part of body, the fruit stalk, the bent part and the straight part of fruit stalk, respectively. The fresh red pepper with bending indices more than 0.4 and 0.3 for the body and the fruit stalk, respectively, was defined to be malformed based on the result of cutting rate using cutting unit; while the other ones to be normal in shape. Based on this, among the total fresh red peppers tested, 47%, 40% and 20% were found malformed for the body, the fruit stalk, and for both of the body and the fruit stalk. Malformed red peppers were poorer in spreading and alignment than normal ones, and the processed quantity was decreased with increased feed rate. The required time for the malformed peppers to pass on the alignment plate inclined at 30 increased rapidly at 8.3 Hz with increased feed rate. For the fresh red peppers with average moisture content of 85%,w.b., the maximum tensile strength between fruit stalk and body was 88.1 N; the maximum cutting resistances were 92.1 N and 94.9 N for the fruit stalk-calyx joint and body, respectively. Average coefficients of static friction were 0.99, 0.62, 0.59 and OJ, respectively, for the surfaces of rubber, galvanized iron, acryl and plywood.