• 한국지반공학회논문집
• /
• 제32권8호
• /
• pp.35-46
• /
• 2016

본 연구에서는 지반조건에 따른 실제 piled raft 기초의 거동을 실규모 시험을 통해 분석하기가 어려운 점을 감안하여 수치해석을 이용한 민감도분석을 수행하고자 하였다. 수치해석에 사용한 프로그램은 유한차분법 기반의 FLAC 3D이다. 말뚝의 수치해석 모델링은 FLAC의 구조요소 중 하나인 말뚝요소를 사용하여 모델링하였고, 지반과 래프트는 연속체 요소를 이용하여 모사하였다. 말뚝의 배열은 $3{\times}3$으로 고정하고 말뚝직경, 말뚝길이, 말뚝간격 그리고 지반조건을 민감도 매개변수로 선정하고 상관관계를 규명하였다. 그 결과, 말뚝직경이 크고 말뚝의 길이가 길수록, 그리고 말뚝의 간격이 넓을수록 piled raft 기초의 전체 지지력은 증가하는 것으로 나타났다. 그러나 지반조건에 따라 말뚝간격이 일정 간격 이상이 될 경우, piled raft 기초의 거동이 래프트만으로 지지되는 얕은기초와 유사한 거동을 보였다. 또한 지반조건이 좋아질수록, piled raft 기초의 전체 지지력은 증가함을 확인할 수 있었다.

• Composites Research
• /
• 제33권3호
• /
• pp.115-124
• /
• 2020

적층복합재료, 특히 탄소섬유 복합재료는 금속에 비해 가벼우며 상대적으로 비강도 및 비강성이 뛰어나기 때문에 항공 우주 산업 및 자동차 산업 등과같이 광범위한 분야에서 사용되고 있다. 그러나, 적층 복합재료는 섬유의 배열이 모두 면내방향으로 배열되어있기 때문에 박리가 발생한다는 큰 단점이 있으며, 이는 적층복합재료의 응용분야를 제한한다. 본 연구에서는 먼저 π-빔과 평판이 결합된 형태의 적층복합재료 T-빔을 개발하고, 구조해석 및 기계적 물성평가를 통하여 설계변수를 최적화하였다. 이후 적층복합재료 T-빔의 설계변수를 3D 직조 프리폼에 동일하게 적용하여 T-빔을 개발하였으며, 적층구조에 비하여 향상된 기계적 강도를 달성할 수 있었다. 이러한 연구결과는 강도향상을 필요로 하는 기존의 적층복합재료 구조물에 적용 가능할 것으로 기대된다.

• 설비공학논문집
• /
• 제27권1호
• /
• pp.44-49
• /
• 2015

Ceiling cooling and heating system that consider load arrangement and space in the ceiling needs to be developed. Therefore, experimental and economic changes were done to verify the performance of compact type VAV. The test results were as follow. 1) Noise test result, measuring approximately 50.4 dB~56.6 dB (before ceiling in landfill), had a better ceiling deadline than the current measure, about a 10 dB noise reduction, so that the office baseline (40~50 dB) noise was judged to be less than test. 2) For the static pressure test result, taking out an outside hydrostatic 25 mmAq, 24.8 mmAq was measured, respectively, at the point. 3) For the life-cycle cost analysis result, the initial investment cost, maintenance replacement costs, and maintenance costs increased 0.2%, but the energy savings ratio was 19.5% while the whole life cycle savings of 40 years LCC was reduced 11.9%.

• 대한토목학회논문집
• /
• 제12권4호
• /
• pp.11-22
• /
• 1992

본 연구에서는 횡열(橫列)배치된 두 원형구조물의 하류측(下流側)에 위치하는 원형구조물의 공기역학적 거동에 대하여 고찰하였다. 세 구조물의 배치에 따라, 하류측(下流側) 구조물에는 4가지 종류의 진동이 발생하는 복잡한 거동이 나타난다. 상류측(上流側) 구조물의 존재에 의하여 vortex induced oscillation은 큰 진폭증가를 보이며, wake buffeting으로 판단되는 한정(限定)지동이 발생한다. 또한 $1.4{\leq}S/D{\leq}3.6$ 간격에서는 풍속증가에 관계없이 일정한 진폭을 유지하는 진동이 발생하며, 이 진동의 진폭이 어느 한계점을 넘게 되면, 풍속증가에 따라 진폭이 증가하는 발산형(發散型) 진동으로 발달하게 된다.

• 대한교통학회지
• /
• 제9권1호
• /
• pp.29-46
• /
• 1991

The purpose of this study is to develop a parking behavior model in prior step for solv-ing parking problems in Pusan C. B. D. The results of this study are as follows; In the C. B. D of Pusan the peak parking time is between 2 and 3 o'clock P. M., and the average parking duration is 237 minutes. It means the use of parking lots is very ineffi-cient. Hence in order to shorten the parking duration, it is very urgent for drivers to chan-ge parking attitude. The walking distance from the parking lots to his destination is below 300∼500m, so the establishment of parking areas and the arrangement of parking lots in C. B. D should be planned on the base of the above walking distance. The model distinguishing between legal and illegal parking behaviors is derived from the binary decision model. The selected model has the correlation rate, η2=0.505 which is relatively high value This result shows that the detetminating judgement on the legal and illegal parking behavior is influenced mutually such factors as driver's occupation parking purpose monthly income distance to his destination averaged parking duration and age.

• 대한한의학회지
• /
• 제28권1호통권69호
• /
• pp.42-50
• /
• 2007

Objectives . This study was to assess the Korean Traditional Medicine forecast subjects that had been expected to be accomplished by 2005. The result will help the Korean medical society plan far policies and studies on Korean Traditional Medicine. Methods : Assessed targets were 64 subjects (expected to be studied until 2005) of the total 93 subjects from the 'Mid- to Long-Term Forecast and Plan Study for Korean Traditional Medicine'. The subjects were classified into two types : political subjects and research and development (R&D) subjects. These were determined by the quantity and contents of related political reports, political research projects, thesis, patent, placing products on sale, etc. Results :1) 5 items of a total 12 political subjects were accomplished or partially accomplished (41.7%), and 9 items of a total 46 R&D subjects were accomplished or partially accomplished (9.5%). 2) While the accomplishment percentage (accomplished or partial accomplished) in literature arrangement and D/B construction field was 100%, it was under 10% in product or system development field. Thus, it seems that practical subjects were less accomplished than academic subjects. 3) On 8 subjects of 'Forecast Research on Future of Oriental Medicine' which had been performed in Japan, the Korean expected dates when the subjects would be realized were earlier than the Japanese ones, but no subjects were realized. Conclusion · Political and academic subjects weir accomplished more than R&D and practical subjects.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.391-394
• /
• 2005

In this paper, we present an approach that is able to reconstruct 3 dimensional metric models from un-calibrated images acquired by a freely moved camera system. If nothing is known of the calibration of either camera, nor the arrangement of one camera which respect to the other, then the projective reconstruction will have projective distortion which expressed by an arbitrary projective transformation. The distortion on the reconstruction is removed from projection to metric through self-calibration. The self-calibration requires no information about the camera matrices, or information about the scene geometry. Self-calibration is the process of determining internal camera parameters directly from multiply un-calibrated images. Self-calibration avoids the onerous task of calibrating cameras which needs to use special calibration objects. The root of the method is setting a uniquely fixed conic(absolute quadric) in 3D space. And it can make possible to figure out some way from the images. Once absolute quadric is identified, the metric geometry can be computed. We compared reconstruction image from calibrated images with the result by self-calibration method.

• Steel and Composite Structures
• /
• 제17권3호
• /
• pp.237-252
• /
• 2014

The use of composite structures is increasingly present in civil building works. Composite Box Girder Bridges (CBGB), particularly, are study of effect of shear connector's numbers and distribution on the behavior of CBGBs is submitted. A Predicti structures consisting of two materials, both connected by metal devices known as shear connectors. The main functions of these connectors are to allow for the joint behavior of the girder-deck, to restrict longitudinal slipping and uplifting at the element's interface and to take shear forces. This paper presents 3D numerical models of CBGBs to simulate their actual structural behavior, with emphasis on the girder-deck interface. Additionally, a Prediction of several FE models is assessed against the results acquired from a field test. A number of factors are considered, and confirmed through experiments, especially full shear connections, which are obviously essential in composite box girder. A good representation for shear connectors by suitable element type is considered. Numerical predictions of vertical displacements at critical sections fit fairly well with those evaluated experimentally. The agreement between the FE models and the experimental models show that the FE model can aid engineers in design practices of box girder bridges. Preliminary results indicate that number of shear studs can be significantly reduced to facilitate adoption of a new arrangement in modeling CBGBs with full composition. However, a further feasibility study to investigate the practical and economic aspects of such a remedy is recommended, and it may represent partial composition in such modeling.

• 설비공학논문집
• /
• 제8권3호
• /
• pp.375-385
• /
• 1996

Turbulent flow and heat transfer characteristics around staggered tube banks were studied using the 3-D Navier-Stokes equations and energy equation governing a steady incompressible flow, which were reformulated in a non-orthogonal coordinate system with cartesian velocity components and discretized by the finite volume method with a non-staggered variable arrangement. The predicted turbulent kinetic energy using RNG $k-{\varepsilon}$ model was lower than that of standard $k-{\varepsilon}$ model but showed same result for mean flow field quantities. The prediction of the skin friction coefficient using RNG $k-{\varepsilon}$ model showed better trend with experimental data than standard $k-{\varepsilon}$ model result. The inclined flow showed higher velocity and skin friction coefficient than transverse flow because of extra strain rate ($\frac{{\partial}w}{{\partial}y}$). Also, this was why the inclined flow showed higher local heat transfer coefficient than the transverse flow.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권3호
• /
• pp.343-350
• /
• 2015

Cocoa pod is among the by-products of cocoa (Theobroma cacao) plantations. The aim of this study was to apply a number of treatments in order to improve nutritional quality of cocoa pod for feeding of ruminants. Cocoa pod was subjected to different treatments, i.e. C (cocoa pod without any treatment or control), CAm (cocoa pod+1.5% urea), CMo (cocoa pod+3% molasses), CRu (cocoa pod+3% rumen content) and CPh (cocoa pod+3% molasses+Phanerochaete chrysosporium inoculum). Analysis of proximate and Van Soest's fiber fraction were performed on the respective treatments. The pods were then subjected to an in vitro digestibility evaluation by incubation in rumen fluid-buffer medium, employing a randomized complete block design (n = 3 replicates). Further, an in vivo evaluation of the pods (35% inclusion level in total mixed ration) was conducted by feeding to young Holstein steers (average body weight of $145{\pm}3.6kg$) with a $5{\times}5$ latin square design arrangement (n = 5 replicates). Each experimental period lasted for 30 d; the first 20 d was for feed adaptation, the next 3 d was for sampling of rumen liquid, and the last 7 d was for measurements of digestibility and N balance. Results revealed that lignin content was reduced significantly when cocoa pod was treated with urea, molasses, rumen content or P. chrysosporium (p<0.01) with the following order of effectiveness: CPh>CAm>CRu>CMo. Among all treatments, CAm and CPh treatments significantly improved the in vitro dry matter and organic matter digestibility (p<0.05) of cocoa pod. Average daily gain of steers receiving CAm or CPh treatment was significantly higher than that of control (p<0.01) with an increase of 105% and 92%, respectively. Such higher daily gain was concomitant with higher N retention and proportion of N retention to N intake in CAm and CPh treatments than those of control (p<0.05). It can be concluded from this study that treatment with either urea or P. chrysosporium is effective in improving the nutritive value of cocoa pod.