• Journal of Environmental Impact Assessment
• /
• v.19 no.2
• /
• pp.153-168
• /
• 2010

The objectives of this study are to analyze flow characteristics for a side weir, which is an inlet structure for flow discharge reduction in the main channel through 3 dimensional numerical analysis and to understand the efficiency of the overflow effect at the side weir. In this study over 40 simulations using FLOW-3D, a computational fluid dynamics program were conducted, and the results were analyzed to find the influence of the flow hydraulics, geometry, channel and weir shapes on the coefficient. It is especially considered the relatively high stage in downstream that may cause flow within channel to be backed up along the channel. Additionally by setting up the scale of simulations much larger than the existing test equipment designed by other researchers, it is intended to analyze more accurate hydraulic behavior along with the realistic hydraulic features such as structures and volumes of flow. The results show that for design with subcritical flow only if the Froude number of upstream is sustained below 0.5 and the length of weir is 33-100% of the width of channel, it is expected to improve the efficiency of the overflow over a side weir.

• Korean Journal of Agricultural Science
• /
• v.10 no.1
• /
• pp.9-21
• /
• 1983

The structures of oak stands were studied in relation to their productivity. Three plots classified by the site quality following to altitude, were selected on the oak stand located at Naryongri Eunsanmyun Buyeogun. The site qualities of the stand studied were generally estimated to be moderate in respect to some soil physical and chemical properties. Quercus variabilis was dominant species in the vegetation composition of the stand studied. The crown densities of the stand were varied from 65.4% in plot I to 78.2% in plot III and the parts, occupied with oak trees, ranged from 44.4% in plot I to 65.9% in plot III in the density. In the contrast to crown density, the growing stocks of oak trees ranged from $3.937m^3$ in plot I (73.4% of plot total) to $2.075m^3$ in plot III (84.3% of plot total). The occupied ratios, measured by crown class, exhibited dissimilarity between crown projection area and volume, and also the ratios brought into different patterns by plot. Highly significant correlations were proved between crown projection areas and volumes of individual oak trees by plot, but not proved in the relations by crown class. The cumulative growth, current annual increment and mean annual increment displayed various patterns by plot and by crown class in the heights, D. B. H. s and volumes of oak trees. The maximum values of current annual increment of height were generally recorded in 10 to 20 years, earlier than those of D. B. H. The mean annual increment of height, D. B. H. and volume maintained similar levels after about 10 years and fluctuated irregularly. The crown projection area and volume following to thinning decreased in the order of the thinning methods of grade A < grade B < crown thinning$90m^3/ha$ in about 40 years in the productivity of volume of the oak stand studied.

• Journal of Korean Society of Forest Science
• /
• v.88 no.3
• /
• pp.389-399
• /
• 1999

This study was conducted to develop an application software, SIDAS3D(Stand Inventory Data Analysis System for 3 Dimensional Representation), of which the purpose of development is to make it easier to analyze and display the 3D spatial structure of a forest stand, based on the data such as tree position, species, DBH, height, clear length of individual trees, and crown width. This program has a statistical analysis function for stand attributes per hectare and displays simple graphs of stand statistics such as the distribution of diameters, heights, and volumes. It also has two additional functions, of which one is to display the 3D image of stand structure and the other is to display the image of crown projection. In addition, this program provides an imaginary treatment simulation function, which can visually confirm the suitability of silvicultural treatments on computers. To test the precision and reliability of SIDAS3D, data obtained by the precision forest inventory method were used. Statistical analysis ability of SIDAS3D was compared with that of SAS. And its representational ability was compared with that of TreeDraw. According to the verification, SIDAS3D was superior to SAS and TreeDraw in both the data processing time and the interpretative ability of results. It was concluded that SIDAS3D could be used to help users efficiently make decisions for appropriate silvicultural treatments and rational management plans because it has analysis functions providing various valuable information.

• Carbon letters
• /
• v.4 no.3
• /
• pp.140-145
• /
• 2003

Antibacterial behaviors of PAN-based activated carbon fibers (ACFs) containing silver metal were investigated. The effects of surface and pore structures of the ACFs were studied by $N_2$/77 K adsorption and D-R plot as a function of silver loading content. The antibacterial activities were investigated by a dilution test against Staphylococcus aureus (S. aureus; gram positive) and Klebsiella pnemoniae (K. pnumoniae; gram negative). As experimental results, the ACFs showed some decreases in specific surface areas, micropore volumes, and total pore volume with an increase of silver content. However, the antibacterial activities of the ACFs were strongly increased against S. aureus as well as K. pnumoniae, which could be attributed to the presence of antibacterial metal in the ACFs system.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.2
• /
• pp.101-108
• /
• 2007

As 3D solid modeling has been widely used in designing products, solid models of the products are directly used in various applications such as engineering analysis and process planing. However, the fully-detailed solid models may not be necessary in some application. For example, it is often more efficient to use simplified model of part of engineering analysis. Generation of mesh for the complex original model requires a quite amount of time, and the consequence of finite element analysis may not be desirable due to small and detailed geometry in the model. In this paper, a method to simplify solid models of machined part is presented. This method decomposes the delta volume of machined part, and uses the decomposed volumes to simplify the solid model. Since this method directly recognizes the features to be removed from the final model, it is independent of not only design features of specific CAD system, but also designer's design practice of design sequences.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2004.08a
• /
• pp.8-21
• /
• 2004

Examples of GPR survey results at a variety of archaeological sites are presented. Several new analyses which include static corrections for the tilt of the GPR antenna are shown for imaging of burial mounds with significant topography. Example archaeological site plans developed from GPR remote sensing of Roman and Japanese sites are given. The first completely automated GPR survey, using only Global Positioning Satellite navigation to create 3D data volumes, is employed for a site in Louisiana to detect lost graves of the Choctaw Indian Tribe.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.616-619
• /
• 2002

The z-map structure is widely used for NC tool path verification as it is very simple and fast in calculation of Boolean operations. However, if the number of the x-y grid points in a z-map is increased to enhance its accuracy, the computation time for NC verification increases rapidly. To reduce this computation time, we proposed a NC verification method using 3-D graphic acceleration hardwares. In this method, the z-map of the resultant workpiece machined by a NC program is obtained by rendering tool swept volumes along tool pathos and reading the depth buffer of the graphic card. The experimental results show that this hardware-based method is faster than the conventional software-based method.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.3
• /
• pp.184-188
• /
• 1998

Four experiments were conducted to determine growth regulators, their concentrations and treatment time, rooting medium, and plant parts for optimum seedling propagation by stem cuttings in yacon (Polymnia sonchifolia Poepp. & Endl.). NAA was the most effective on rooting, and followed by IBA 2,4-D, and IAA. Dipping the base of cuttings in 50 or 100 ppm solutions of IBA increased rooting ratios. The 100 ppm solution of IBA was 14% higher than the 50 ppm solution for rooting ratios. Rooting medium with equal volumes of clay loam and sand was the most suitable for rooting of cuttings. Cuttings with both terminal bud and the first node or cuttings with both the first and second nodes were higher in rooting ratios than cuttings with only terminal bud or the first or second nodes. Days to rooting was not affected by plant parts.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.21 no.2
• /
• pp.49-52
• /
• 2001

conditions for callus induction and plant regeneratin from seeds of lawngrass (Zoysia japonica Steud.) were confirmed in this study. MS (Murashige and Skoog) medium containg 2,4-D 3 or 5mg/l was used for callus induction, and MS medium with different volumes of BA, NAA and kinetin hormones was used to regenerate the plants from induced calli. MS basic medium containing agar with no hormones or kinetin 1.0mg/l and MS basic medium containing gelite and NAA 1.0mg/l were higher for green callus induction. MS medium containing agar and kinetin 1.0mg/l ws highest degree of efficiency for plant regeneration.

• Korean Journal of Geomatics
• /
• v.1 no.1
• /
• pp.15-20
• /
• 2001

In this study, several basic data for road design and GIS data were used for selecting the optimized road alignment database system. The cut and fill volumes were compared with existing manual road design method through the analysis and data application in this database system. We solved and estimated objective, economic, environmental and technical problems caused in road construction comparing existing manual method with the road alignment which was selected in GIS automatically. Also, we performed three dimensional simulation with the existing road design program and simulation of virtual reality through Virtual GIS. This study showed the method in selecting the optimized road alignment through the analysis and comparison of the selected road alignment. The goal of this study is comparison and analysis of definite cut and fill volume and environmental problem after the road construction through analyzing and comparing the social, economic, technical and environmental aspect in the road alignments with various statistic data.