• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.4
• /
• pp.450-456
• /
• 2010

In the high-speed packet service, next generation mobile communication system has emerged as a major feature. If the fire of these high-speed kit services and non-continuous transmission of data due to the symmetrical nature of daeyiteo traffic for D-CDMA system has been actively studied. Small amounts of data moving in the uplink, but the real-time video downlink transmission, such as downloading large files to move data and services to those with asymmetric traffic characteristics, a system that can efficiently handle the data requirements be. Of 3GPP TDD(Time Division Duplex) scheme based on CDMA and TDMA in a way by introducing the concept through the proper allocation of time slots that can handle asymmetric traffic efficiently, has an advantage. TD-CDMA system by considering the characteristics of the frame configuration of transmission methods, such as physical channel structure and channel coding has been investigated. In addition, the HARQ scheme TD-CDMA system performance is analyzed by comparing them.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.1-6
• /
• 2011

In this paper, an 1.5Gbit/s wireless data transmission system using the carrier frequency of 300 GHz band was implemented. The RF front-end was composed of schottky diode sub-harmonic mixer, frequency tripler, and horn antennas for transmitter and receiver, respectively. The LO frequencies of sub-harmonic mixer are 150GHz for transmit chain and 156GHz for receive chain. The ASK(Amplitude Shift Keying) modulation was used in the transmitter and the envelope detection method was used in the heterodyne receiver. The conversion loss of sub-harmonic mixer and implementation system loss were measured to be 9.8dB and 1.2dB, respectively. The 1.5Gbit/s video signal with HD-SDI format was transmitted over wireless distance of 40cm without optical lens(4.2m with optical lens) and displayed on HDTV at the transmitted average output power of $20{\mu}W$.

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.75-80
• /
• 2013

In this paper, the Ka-band maritime satellite communication systems for mobile terminals are proposed. The design includes the link budget analysis, determination of modulation and coding schemes and the overall structure of a transmitter. To avoid the harmful effects on the existing DVB-S2 services, the proposed maritime satellite system using the same spectrum with DVB-S2 at the same time employs the very wideband spreading transmission. Additionally, omni-directional low-gain antennas should be equipped in a mobile terminal to reduce the system cost. These two considerations limit the maximum transmission rate of the proposed system. Due to the limitations, the proposed system includes 36 dB or 39 dB spreading gain depending on the modulation scheme and a link-adaptive repetition method depending on the level of rain attenuation. To support short packets with minimal performance loss, the turbo code used in 3GPP instead of LDPC(low density parity check code) is adopted. By combining them, the overall structure of low-rate maritime satellite communication system is designed.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.4
• /
• pp.21-26
• /
• 2018

Recently, the emergence of 3D cameras, 3D scanners and various cameras including Lidar is expected to be applied to applications such as AR, VR, and autonomous mobile vehicles that deal with 3D data. In Particular, the 3D point cloud data consisting of tens to hundreds of thousands of 3D points is rapidly increased in capacity compared with 2D data, Efficient encoding / decoding technology for smooth service within a limited bandwidth, and efficient service provision technology for differentiating the area of interest and the surrounding area are needed. In this paper, we propose a new quality parameter considering characteristics of 3D point cloud instead of quality change based on assumed video codec in MPEG V-PCC used in 3D point cloud compression, 3D Grid division method and representation for selectively transmitting 3D point clouds according to user's area of interest, and propose a new 3D Manifesto. By using the proposed technique, it is possible to generate more bitrate images, and it is confirmed that the efficiency of network, decoder, and renderer can be increased while selectively transmitting as needed.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.3 s.309
• /
• pp.9-16
• /
• 2006

Many image and video compression algorithms work by splitting the image into blocks and producing variable-length code bits for each block data. If variable-length code data are transmitted consecutively over error-prone channel without any error protection technique, the receiving decoder cannot decode the stream properly. So the standard image and video compression algorithms insert some redundant information into the stream to provide some protection against channel errors. One of redundancies is resynchronization marker, which enables the decoder to restart the decoding process from a known state in the event of transmission errors, but its usage should be restricted not to consume bandwidth too much. The Error Resilient Entropy Code(EREC) is well blown method which can regain synchronization without any redundant information. It can work with the overall prefix codes, which many image compression methods use. This paper proposes EREREC method to improve FEREC(Fast Error-Resilient Entropy Coding). It first calculates initial searching position according to bit lengths of consecutive blocks. Second, initial offset is decided using statistical distribution of long and short blocks, and initial offset can be adjusted to insure all offset sequence values can be used. The proposed EREREC algorithm can speed up the construction of FEREC slots, and can improve the compressed image quality in the event of transmission errors. The simulation result shows that the quality of transmitted image is enhanced about $0.3{\sim}3.5dB$ compared with the existing FEREC when random channel error happens.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.6
• /
• pp.77-83
• /
• 1999

H.263 is an international standard of ITU-T that can makes the service such as video phone, video conference in the transmission line less than 64Kbps. This recommendation draft has used motion estimation/compensation, transform coding and quantizing methods. TMN5 used for the performance estimation of H.263 has fundamentally used DCT in transform coding method and presented quantizer for quantizing the DCT transform coefficient. This paper is presenting adaptive quantizer effectively able to quantize DCT coefficient considering the human visual sensitivity while the structure of TMN5 is maintaining. As quantizer that proposed DCT-based H.263 could make transmit more frame than TMN5 in a same transfer speed, it could lower the frame drop effect. And the luminance signal appeared the difference of -0.3 ～ +0.7dB in the average PSNR for the estimation of objective image quality and the chrominance signal appeared the improvement in about 1.5dB in comparision with TMN5. As a result it can attain the better image quality compared to TMN5 in the estimation of subjective image quality.

• Journal of Broadcast Engineering
• /
• v.19 no.1
• /
• pp.44-55
• /
• 2014

The goal of 3D stereoscopy is not only to maximize positive experiences (such as sense of realism) by adding depth information to 2D video but to also minimize negative experiences (such as fatigue). This study examines the impact of different depth levels induced by adjusting 3D camera convergences on positive and negative experiences and finds an optimal parameter for viewers. The results show that there are significant differences among depth levels on spatial involvement, realistic immersion, presence, depth perception, screen transmission, materiality, shape perception, spatial extension and display perception. There are also significant differences for fatigue and unnaturalness. This study suggests that reducing the camera convergence angle of an object by $0.17^{\circ}$ behind the object is the optimal parameter in a 3D stereoscopic setting.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.07a
• /
• pp.576-578
• /
• 2020

최근 사용자에게 더욱 몰입감 있는 콘텐츠를 제공하기 위한 기술에 대한 관심이 증가하고 있으며 기존의 2D 콘텐츠와는 다른 새로운 방식인 3D 콘텐츠에 대한 연구가 활발히 진행되고 있으며 그 중 가장 대표적인 것이 Point Cloud 영상이라고 할 수 있다. Point Cloud의 경우 수많은 3차원 좌표를 가진 점들로 구성되어 있으며 각 점들마다 Attribute 값을 이용하여 색상 등의 표현이 가능한 구조로 이루어져 있다. 이러한 특성 때문에 Point Cloud 데이터는 방대한 용량을 가지고 있으며 기존의 2D 방식과 데이터 구조가 상이하기 때문에 새로운 압축 표준이 요구되었다. 이에 미디어 표준화 단체인 MPEG(Moving Picture Experts Group)에서는 MPEG-I(Immersive) 차세대 프로젝트 그룹을 이용하여 이러한 움직임에 대응하고 있다. MPEG-I의 part 5(Video-based Point Cloud Compression, V-PCC)에서는 객체를 대상으로 하여 기존의 비디오 코덱을 활용한 Point Cloud 압축 표준화를 진행중이다. V-PCC 데이터의 경우 기존의 2D 영상 데이터와 같이 전송을 통해 소비될 가능성이 아주 높기 때문에 이에 대한 고려가 필요하다. 현재 MPEG에서 표준화를 완료한 MMT(MPEG Media Transport)라는 전송 표준이 존재하기 때문에 이 기술을 활용 가능할 것으로 보인다. 따라서 본 논문에서는 Point Cloud 데이터를 압축한 V-PCC 데이터를 전송 표준 방식인 MMT를 이용하여 전송하는 방안에 대하여 제안한다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.35-47
• /
• 2011

A present experimental broadcasting is service compatible to delivery left view and right view of a dual stream for backward compatible with 2D device. It has a limitation of quality for a transmission of dual stream in terrestrial bandwidth 19 Mbps. This paper proposes adjunct terrestrial-3D broadcasting system which can provide a stable quality beyond a limitation of quality from fixed bandwidth. It proposes the system that composes a high quality stereoscopic video through synchronizing Real time broadcasting and Non Real Time broadcasting Regardless of the terrestrial bandwidth. So this paper tries to analyze each technique of Real-Time broadcasting and NRT broadcasting, and verify this proposal through the technique of an algorithm that we can implement NRT adjunct high quality 3DTV system and the experiments.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.6
• /
• pp.47-53
• /
• 2021

In this paper, we propose a multi-vision based hologram display to improve the limited viewing angle problem of a single fan hologram display. Existing single fan type displays have a narrow viewing angle. And when the length of the fan becomes longer, there is a problem of low resolution. Also, it is difficult to change data due to the use of the SD card. So, we want to implement a dedicated app to transmit data via Wi-Fi. In this paper, we designed and implemented a display consisting of 3 REG LED fans. As a result of video transmission using the app, it was confirmed that it can be used for commercial purposes such as advertisements and demonstrations. The results of this study are thought to be of great help in the popularization of multi-vision holograms.