• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.208-211
• /
• 2001

In the drawing from round billet to non-circular section there are two different processes through solid hole die(HD) and the other cassette roller dies(CRD). The CRD process has several cassette type rollers and a billet is able to move through the given gaps between two profiled rollers. The objective of this study is based on the analysis and evaluation of two aforementioned processes using experiments and finite element simulation. In order to simulate the multi-stage drawing process from circular sectioned billet to rounded square section, the finite element analysis is applied to the process using a commercially available DEFORM-3D code. Two types of experimental drawing tests through designed and manufactured dies for pure copper and aluminum alloy are carried out at room temperature. The analysis included comparison of material properties before and after drawing of each process and also provide some useful information by a FEM simulation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.475-480
• /
• 2008

Hemming, especially curl hemming, is required along the wheel housing for safety. Robot roller hemming is suitable for it. In this paper, both the flat hemming and the curl hemming along either the straight profile or the curved profile are analyzed using finite element program MSC.Marc to verify the hemming test results. Both the inner panel and the outer panel are modeled using 3-D solid elements and the roler is modeled using rigid surface. In the curl hemming, there is a case that the curl is not formed if the pre-hemming force is not sufficient. It agrees with the test results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1061-1064
• /
• 2006

Optimal design of functionally graded plates is investigated considering stress and critical temperature. Material properties are assumed to be temperature dependent and varied continuously in the thickness direction. The effective material properties are obtained by applying linear rule of mixtures. The 3-D finite element model is adopted using an 18-node solid element to analyze more accurately the variation of material properties and temperature field in the thickness direction. For stress analysis, the tensile stress ratio and compressive stress ratio of the structure under mechanical load are investigated. In the thermo-mechanical buckling analysis, temperature at each node is obtained by solving the steady-state heat transfer problem and Newton-Raphson method is used for material nonlinear analysis. Finally, the optimal design of FGM plates is studied for stress reduction and improving thermo-mechanical buckling behavior, simultaneously.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권7호
• /
• pp.483-487
• /
• 2000

The analysis of current distribution in a solidly modeled coil is very important for accurate of electric machines such as deflection yoke. In general, Modeling every coils is nearly impossible for analyzing magnetic field using the 3-D finite element method, so solidly modeled coil is usually used. Some methods have been developed for analyzing current distribution, but these methods have fatal disadvantages. The main disadvantages are that the methods cannot be applied to an arbitrary shaped coil and that they yield numerical errors. In this paper, a novel method for resolving the problems mentioned above is proposed. The new method is verified by the application to a test model and it shows a very accurate result.

• 토지주택연구
• /
• 제4권3호
• /
• pp.271-277
• /
• 2013

수평하중을 받는 말뚝의 거동 예측에는 일반적으로 비선형 p-y 곡선을 이용한 BNWF(Beam on Nonlinear Winkler Foundation) 해석법이 주로 사용된다. BNWF 해석법은 다양한 사례를 통하여 정확성이 입증된 반면 군말뚝의 경우 p-multiplier를 사용해야 하는 단점을 가지고 있다. 이와같은 단점은 유한요소 또는 차분법의 사용으로 해결할 수 있다. 이 방법 적용 시, 지반과 말뚝은 솔리드 요소로 모델링된다. 하지만, 말뚝을 솔리드 요소로 모사하게 되면 회전 자유도가 없어 정확성이 감소하며 이를 극복하기 위해서는 요소의 크기를 현저하게 감소시켜야 하지만 3D 해석에서 요소 수의 증가는 막대한 연산시간이 요구되므로 적용에 문제가 있다. 본 연구에서는 이와 같은 단점을 극복하는 빔요소와 Rigid 링크를 이용한 말뚝 모델링 방법을 구축하였으며 이의 적용성을 현장시험결과와 BNWF의 비교를 통하여 검증하였다. 사용된 해석 프로그램은 지진공학용으로 개발된 OpenSees이다. 비교 결과, 빔요소와 Rigid 링크를 이용한 방법은 비교적 정확하게 현장시험결과와 일치하는 것을 확인하였다. 추후 이 방법은 군말뚝의 해석에 효과적으로 사용될 수 있을 것으로 판단된다.

• KCI Concrete Journal
• /
• 제13권1호
• /
• pp.19-25
• /
• 2001

Based on the orthotropic hypoelasticity formulation, a constitutive material model of concrete taking account of triaxial stress state is presented. In this model, the ultimate strength surface of concrete in triaxial stress space is described by the Hsieh's four-parameter surface. On the other hand, the different ultimate strength surface of concrete in strain space is proposed in order to account for increasing ductility in high confinement pressure. Compressive ascending and descending behavior of concrete is considered. Concrete cracking behavior is considered as a smeared crack model, and after cracking, the tensile strain-softening behavior and the shear mechanism of cracked concrete are considered. The proposed constitutive model of concrete is compared with some results obtained from tests under the states of uniaxial, biaxial, and triaxial stresses. In triaxial compressive tests, the peak compressive stress from the predicted results agrees well with the experimental results, and ductility response under high confining pressure matches well the experimental result. The reinforcing bars embedded in concrete are considered as an isoparametric line element which could be easily incorporated into the isoparametric solid element of concrete, and the average stress - average strain relationship of the bar embedded in concrete is considered. From numerical examples for a reinforced concrete simple beam and a structural beam type member, the stress state of concrete in the vicinity of talc critical region is investigated.

• 한국정밀공학회지
• /
• 제21권11호
• /
• pp.163-170
• /
• 2004

In order to produce high-quality optical components, aspheric lenses have been widely applied in recent years. An aspheric lens consists of aspheric surfaces instead of spherical ones, which causes difficulty in the design process as well as the manufacturing procedure. Although injection molding is widely used to fabricate optical lenses owing to its high productivity, there remains lots of difficulty to determine appropriate mold design factors and injection molding parameters. In the injection molding fields, computer simulation has been effectively applied to analyze processes based on the shell analysis so far. Considering the geometry of optical lenses, however, numerical analysis based on solid elements has been reported as more reliable approach than shell -based one. The present work covers three-dimensional injection molding simulation using MP1/Flow3D and relevant deformation analysis of an injection molded plastic lens based on solid elements. Numerical analysis has been applied to the injection molding processes of an aspheric lens for a photo pick-up device. The reliability of the proposed approach has been verified in comparison with the experiments.

• 한국콘텐츠학회논문지
• /
• 제10권1호
• /
• pp.147-159
• /
• 2010

국내에 출시된 터치스크린 폰에서 기존 평면 UI와 달리 큐브형태의 3차원 입체그래픽을 제공하는 3D UI가 적용됐다. 본 연구는 두 개의 다른 기업의 브랜드가 3D GUI에 대한 사용자 개개인의 개별적이고 차별화 된 사용자 경험에 영향을 미치는가를 연구해보고자 한다. 이러한 관점에서 개별적이고 차별화된 브랜드가 사용자 경험과 밀접한 상관관계가 있다는 가설을 만들고 연구모형을 설계하였다. 현재까지 발표된 3D GUI 사례를 중심으로 브랜드 공개와 비공개로 사용자 경험 만족도를 측정하였고, 만족도의 차이가 있음을 명확히 알 수 있었다. 브랜드 공개시 응답자는 자신의 기능선택에 대해 논리적인 이성은 뒤로하고 브랜드에 집중하는 반응을 보였다. 이 연구를 통해 기업체들이 경쟁적으로 출시한 3D GUI를 사용함에 있어 브랜드가 사용자 경험의 중요한 요소임을 확인하였다. 따라서 디자이너들은 제품이나 서비스가 만들어지는 과정에서 브랜드가 디자인의 핵심부분으로써 전략이 필요함을 시사한다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.245-256
• /
• 2014

I-core sandwich panel that has been used more widely is assembled using high power $CO_2$ laser welding. Kim et al. (2013) proposed a circular cone type heat source model for the T-joint laser welding between face plate and core. It can cover the negative defocus which is commonly adopted in T-joint laser welding to provide deeper penetration. In part I, a volumetric heat source model is proposed and it is verified thorough a comparison of melting zone on the cross section with experiment results. The proposed model can be used for heat transfer analysis and thermal elasto-plastic analysis to predict welding deformation that occurs during laser welding. In terms of computational time, since the thermal elasto-plastic analysis using 3D solid elements is quite time consuming, shell element model with multi-layers have been employed instead. However, the conventional layered approach is not appropriate for the application of heat load at T-Joint. This paper, Part II, suggests a new method to arrange different number of layers for face plate and core in order to impose heat load only to the face plate.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.248-251
• /
• 2005

To investigate the degeneration process in the intervertebral disc, a three dimensional (3D) poroelastic finite-element (FE) model was developed. Disc was modeled as two different regions, such as annulus modeled with fiber reinforced 20 node poroelastic ground matrix and nucleus having large porosity. Excess Von Mises stress in the disc element assumed to be a possible source of degeneration under compressive loading condition. Recursive calculation was continued until the desired convergence was attained by changing the permeability and porosity of those elements, which could be predicted from the previous iteration. The degenerated disc model showed that relatively small compressive stresses were generated in the nucleus elements compared to normal disc. Its distribution along the sagittal plane was matched well with a previously reported experimental result. Contrasts to this result, pore pressures in the nucleus were higher than those in the normal disc. Total stress indicated similar values for two different models. This new approach using poroelastic modeling could provide the explanation of the interaction between fluid and solid matrix in the disc during the degeneration process.