• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.915-917
• /
• 2003

In this paper, a 3D shape optimization algorithm which guarantees a smooth optimal shape is presented using parameterized sensitivity analysis. The design surface is parameterized using Bezier spline and the control points of the spline are taken as the design variables. The parameterized sensitivity for the control points are found from that for nodal Points. The design sensitivity and adjoint variable formulae are also derived for the 3D non-linear problems. Through an application to the shape optimization of 3D electromagnet to get a uniform magnetic field, the effectiveness of the proposed algorithm is shown.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.3
• /
• pp.633-640
• /
• 2024

This study develops AI-based 3D body shape modeling technology that can be utilized in the healthcare sector, proposing a system that enables monitoring of users' body shape changes and health status. Utilizing data from Size Korea, the study developed a model to generate 3D body shape images from 2D images, and compared various models to select the one with the best performance. Ultimately, by proposing a system process through the developed technology, including personalized health management, exercise recommendations, and dietary suggestions, the study aims to contribute to disease prevention and health promotion.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.910
• /
• pp.1300-1311
• /
• 2004

The aim of this study was to provide the 2 and 3 dimensional statistics requisite in the sizing system and design of gloves. The 64 2-dimensional static measurements were selected to provide information about hands. Participants in the study were 824 adults, aged between 18 and 64. To summarize the information from the measurement values, a Factor Analysis and a Cluster Analysis among multivariate analyses were performed. 3-D scanner was used for visual results of hand shape of each cluster. The results were as follows. Twenty-two items were used for the factor and cluster analysis in order to classify the adult hand shape. The variable quantities that are explained by a total of 3 factors amounted to under 79.37% of the variable quantities. The definition results of the factors related to the hands are as follows: Factor 1 is the horizontal dimension, the thickness of hand factor; Factor 2 is the height of the crotch; and Factor 3 is the vertical dimension of the hand. The adults' group hand was divided into 2 clusters according to a cluster analysis using factor scores. The characteristics according to hand type were as follows: Cluster 1 referred to high horizontal dimensions and thickness, rather small vertical dimensions and crotch height; and Cluster 2 represented the rather smaller horizontal dimensions and thickness but longer hand length than Type 1. To provide specific shape data of each cluster, 3-D scanner measurement was performed. 3-dimensional data base was developed for each cluster type and visual information was provided.

• The Research Journal of the Costume Culture
• /
• v.17 no.6
• /
• pp.1099-1111
• /
• 2009

The purpose of this study is to classify body shapes of aged women by using 3D body scan data. For the body shape analysis and classification, 3D body scan data of 270 aged women were used, and 16 main measurements consisting of a human body were used to conduct factor analysis, cluster analysis and discriminant analysis. The analysis were performed on all 'the method using the absolute value', 'the method using index of height and weight', and 'the method using index of height', and according to the classification results, the method which categorizes body shapes best in terms of their shapes was adopted. As the factor analysis result using the numerical value of height to categorize the body shapes of the aged women, factor 1 was the thickness and width for the height, factor 2 was the height of the upper part of the body for the height, factor 3 was the height of hips for the height, and factor 4 was the height of belly for the height. When the body shapes were categorized with the deducted factors as variables, they were divided into two types. Type 1 was a short and fat body shape($\blacksquare$ type) and 55.6% of the subjects were of this type. Type 2 was for the body shape whose vertical height, including weight, was long but all kinds of width and thickness were small, that is, tall and thin body shape($\blacksquare$ type), and 44.4% of the aged women were in this case.

• Fashion & Textile Research Journal
• /
• v.22 no.1
• /
• pp.87-93
• /
• 2020

This study provide basic data to develop a dress form reflecting body shape characteristics by age and to produce a 3D body form in a virtual fitting program. A comparative analysis was conducted on the size, section shape, and slope of side shape of the modeling form by the sizing of the basic female avatar in CLO 3D, one of the 3D apparel CAD programs and the body form of women in their 20s-50s by body shape in the 6th Size Korea (2010). First, all the differences were formed similarly in the direct measurements between the 3D avatar and the body form were within 1 mm. Second, in a comparison of the section form of the avatar and body form in Size Korea, the avatar was formed in straight body shape and did not reflect a spinal curvature according to age. As a result of an examination of the items with a difference over 5° in the slope of side shape, there were angle differences in numerous body shapes in the angles of the side upper abdomen, side upper back, and side upper bust, and the avatar's bust shape was expressed more flatly compared to body form. It will be possible to produce an avatar that can adequately reflect body shape characteristics by adding detailed length and angle items by the region like waist back length and front length in producing the avatar reflecting body shape characteristics, instead of a standard body shape.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.124-127
• /
• 2002

This paper presents a 3D shape optimization algorithm for electromagnetic devices using the design sensitivity analysis with finite element method. The structural deformation analysis based on the deformation theory of the elastic body under stress is used for mesh renewing. The design sensitivity and adjoint variable formulae are derived for the 3D nonlinear finite element method with edge element. The proposed algorithm is applied to the shape optimization of 3D electromagnet to get a uniform flux density at the air gap.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.3B no.1
• /
• pp.23-31
• /
• 2003

A novel 3D shape optimization algorithm is presented for electromagnetic devices carry-ing eddy current. The algorithm integrates the 3D finite element performance analysis and the steepest descent method with design sensitivity and mesh relocation method. For the design sensitivity formula, the adjoint variable vector is defined in complex form based on the 3D finite element method for eddy current problems. A new 3D mesh relocation method is also proposed using the deformation theory of the elastic body under stress to renew the mesh as the shape changes. The design sensitivity f3r the sur-face nodal points is also systematically converted into that for the design variables for the parameterized optimization application. The proposed algorithm is applied to the optimum design of the tank shield model of the transformer and the effectiveness is proved.

• Journal of Korean Society of societal Security
• /
• v.2 no.1
• /
• pp.81-89
• /
• 2009

A web-based information management system to share engineering data of truss bridge is developed through construction of standardized database of truss bridge. 3D shape information is stored in database according to AP 203 of STEP, and 3D visualization on the web is implemented by using the web 3D technology that helps users to understand geometrical shape of structures, directly. AP209 is used to store structural analysis information such as finite elements, material properties, and analysis result into relational database. Based on the developed database, a prototype of integrated information management system for truss bridge is developed, and it provides additional information such as specifications and inspection information related with shape object to end users.

• Fashion & Textile Research Journal
• /
• v.14 no.1
• /
• pp.109-121
• /
• 2012

This study aims at developing ergonomics patterns for the sleeve of structural firefighting protective clothing through 3D motion analysis in order to ensure efficiency and safety of firefighters who are exposed to harmful environment at work. A new research pattern was developed by applying the total results of 3D motion analysis, changes of body surface length measurements, and 2D data on 3D body shape analysis on the size 3 patterns of the existing coat sleeve. For the sleeves, we used the body surface length of the range of shoulder's flexion and the joint angle of the range of wrist's ulnar deviation. And for the production of structural firefighting protective clothing using the research pattern, we recruited a recognized producer of structural firefighting protective clothing designated by KFI. Unlike everyday clothes, structural firefighting protective clothing should be able to fully protect the wearers from the harmful environment that threatens their lives and should not cause any restrictions on their movement. Therefore, the focus of research and development of such protective clothing should be placed on consistent development of new technologies and production methods that will provide protection and comfort for the wearer rather than production cost reduction or operational efficiency. This study is meaningful as it applied 3D motion analysis instead of the existing methods to develop the patterns. In particular, since 3D motion analysis enables the measurement of the range of motion, there should be continuous research on the development of ergonomics patterns that consider workers' range of motion.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.3
• /
• pp.81-86
• /
• 2015

We fabricated a 3D knee joint model through the imaging processing. The 3D shape information is different depends on specific conditions when the shape of real knee joint is extracted from CT/MRI sliced images. The two types of joint models were fabricated by using 3D printer in order to analysis of joint movement by slight difference of 3D shape information. The compressive force experiments were performed by using knee joint model. As the results, the compressive forces were changed with respect to the difference of geometry. Consequently, feasibility test should be performed before developing biomimetic bioreactor.