• Title/Summary/Keyword: 3D Shape

검색결과 3,429건 처리시간 0.035초

First Report of Anthracnose Caused by Colletotrichum sojae on Peanut in Korea (Colletotrichum sojae에 의한 땅콩 탄저병 발생 보고)

  • Shinhwa Kim;Soo Yeon Choi;Hyunjung Chung;Nak Jung Choi;Bo Yoon Seo;Sang-Min Kim
    • The Korean Journal of Mycology
    • /
    • 제52권1호
    • /
    • pp.55-60
    • /
    • 2024
  • In August 2023, leaf spot disease was observed in peanuts in Cheongju-si, Korea. Leaf spots occurred at the leaf margins and the lesions gradually expanded. Diseased leaf areas were light or dark brown and irregular in shape. A fungal isolate was obtained from symptomatic leaf and cultured on potato dextrose agar (PDA) medium at 25℃. An isolate was identified as Colletotrichum sojae based on morphological characteristics and sequences of the internal transcribed spacers, glyceraldehyde-3-phosphate dehydrogenase, chitin synthase-1, actin, and 𝛽-tubulin genes. Pathogenicity tests were performed on peanut seedlings in a conidial suspension (1×106 conidia/mL). Lesions were observed on the peanut leaf 5 d after inoculation. The pathogen was re-isolated from the lesions of the inoculated leaves. To the best of our knowledge, this is the first report of anthracnose on peanut caused by C. sojae in Korea.

Proposal for a maintenance management system using point clouds.

  • keiki FUKUMURA;daisuke NAKAGAWA;tomohiko WATANABE;kenji OTSUKA;shunshi FUJII;daichi HASHIBA;ryuga OTSUKA;kazuya SHIDE
    • International conference on construction engineering and project management
    • /
    • The 10th International Conference on Construction Engineering and Project Management
    • /
    • pp.941-948
    • /
    • 2024
  • BIM (Building Information Modeling) is touted for efficient building maintenance and operation. However, transitioning from construction to maintenance poses challenges in information transfer and definitive data before completion. Existing structures often lack BIM, demanding more modeling. Additionally, few maintenance staff are skilled in BIM tools.On the other hand, there are studies utilizing point clouds for maintenance. Since point cloud data can record the current situation in 3D, it has advantages such as easily representing valve positions of equipment compared to deformed BIM data.Attribute information uses the international standard COBie, which can record and manage data necessary for building asset management.Point cloud data is broken down into groups of objects necessary for maintenance management by referencing the Common Specification for Building Preservation. Each decomposed object is assigned a corresponding Uniclass number.In this system, the point cloud data, which represents the shape information of the building, is decomposed into objects based on the Common Specification. Using COBie, the building database is created and tasks related to the objects are organized. Each database and system is then connected using Uniclass.By implementing this system, even buildings completed can easily create BIM data from point clouds. Furthermore, since it complies with the international standard COBie, maintenance tasks can be performed in a standardized format, serving as a bridge to the maintenance management system.

Enhancing Automated Recognition of Small-Sized Construction Tools Using Synthetic Images: Validating Practical Applicability Through Confidence Scores

  • Soeun HAN;Choongwan KOO
    • International conference on construction engineering and project management
    • /
    • The 10th International Conference on Construction Engineering and Project Management
    • /
    • pp.1308-1308
    • /
    • 2024
  • Computer vision techniques have been widely employed in automated construction management to enhance safety and prevent accidents at construction sites. However, previous research in the field of vision-based approaches has often overlooked small-sized construction tools. These tools present unique challenges in data collection due to their diverse shapes and sizes, as well as in improving model performance to accurately detect and classify them. To address these challenges, this study aimed to enhance the performance of vision-based classifiers for small-sized construction tools, including bucket, cord reel, hammer, and tacker, by leveraging synthetic images generated from a 3D virtual environment. Three classifiers were developed using the YOLOv8 algorithm, each differing in the composition of the training dataset: (i) 'Real-4000', trained on 4,000 authentic images collected through web crawling methods (1,000 images per object); (ii) 'Hybrid-4000', consisting of 2,000 authentic images and 2,000 synthetic images; and (iii) 'Hybrid-8000', incorporating 4,000 authentic images and 4,000 synthetic images. To validate the performance of the classifiers, 144 directly-captured images for each object were collected from real construction sites as the test dataset. The mean Average Precision at an IoU threshold of 0.5 (mAP_0.5) for the classifiers was 79.6%, 90.8%, and 94.8%, respectively, with the 'Hybrid-8000' model demonstrating the highest performance. Notably, for objects with significant shape variations, the use of synthetic images led to the enhanced performance of the vision-based classifiers. Moreover, the practical applicability of the proposed classifiers was validated through confidence scores, particularly between the 'Hybrid-4000' and 'Hybrid-8000' models. Statistical analysis using t-tests indicated that the performance of the 'Hybrid-4000' model would either matched or exceeded that of the 'Hybrid-8000'model based on confidence scores. Thus, employing the 'Hybrid-4000' model may be preferable in terms of data collection efficiency and processing time, contributing to enhanced safety and real-time automation and robotics in construction practices.

A Study on Marketing of Cultured Laver Products (양식해태의 유통에 관한 조사 연구)

  • 유충열
    • The Journal of Fisheries Business Administration
    • /
    • 제4권1_2호
    • /
    • pp.19-57
    • /
    • 1973
  • Laver io one of the most necessary and seasonal items in Korean food from oldtimes. Laver is lagely eaten in dried form, and its supply depends entirely upon culture weeds. The history of laver culture in Korea about sixty or seventy years is older than in Japan. Significance of laver culture is divided into two aspects, one is food supply in the nation, and the other is export to other countries. Houses engaged in laver culture are about foully thousands, and laver production in 1972 is estimated as 1, 3 bitten sheets. (1 sheet is a dried laver of 20 cm sq, in the shape of paper) Especcially meaning of layer production is the concentration of labour input, and systematic management of labour. From around 1920, the method of laver culture was introduced by Japanese Imperialism for mono culture in shallow seas, and mass products of laver is provided to Japan market, DOMESTIC MARKET Fundamental consume function calculates at below, $D_{(68_71)}$=16354 $Y^{0.471}$ $P^{-1.0662}$ where D is total layer demand, Y income variable, P price variable. It means income elasticity is 476. in the whole country, and price elasticity is 1, 07. But generally income elasticity is higher in urban area than in rural area, as shown at 1, 3 in Seoul city. Expence of laver in house expenditure is mutually correlated with another expence, See Table 12 about the relative function. See Table 14 and 16 about the relation between the gathering and the changes of price in auction, wholesale and retail price support system is for two effects, one of which is constraint of the upper price, the other is rise of the lower price. Before the system control, the equation in three year average calculated as below, $Y_{b}$ =18, 907.7455+15435.9364 t (r=0.89) where the origin t=0 is the November and the units are month. Post the system control, $Y_{p}$ =30, 047.9636+1, 631.1721t (r=0.97) therefore, this system has an effect only on the rise of lower price, Average annual margins of laver products at four market levels according to the consumer spent is below. EXPORTING MARKET Japanese demand function of laver products is, Log D=5, 289+1, 108 Log Y-1, 395 Log P (r=0.987) where D is Japanese laver demand, Y income variable, P price variable. according to which income elasticity is 1. 1 and price elasticity is 1.4. Laver production in 1970 tile highest record till then, is estimated as six billion sheets. But the recent improvement of laver culture techniques, the production of seeds and freezing storage of seeds has been stabilized. Futher new culture farms have been developed by means of break- water fences or by floating culture method. These improvements have been backed up with increased demand of laver products. Import quantity and price of Korean laver products are restrained by three organizations, that is producer, distributor and consumer. This relationship calculated by regression equation shows that import is influenced only producer organization, at the sacrifice of consumer profit. For increase to export of laver products, we urgently require to open foreign trade of laver products for Japanese consumer, .and Japan has political responsibility to solve Korean laver structure. But with long run timeseries, as regards Japanese production and import quantity, importing function shows increasing trend as below, 250 million sheets <3, 947.1674+0.005 $L_{g}$ >) 600 million sheets where $L_{q}$ is relative production quantity of laver in Japan. (unit; 100 thousand sheets) Our Export effort should be put on the highly processed products whithin the restraind quote.ote.

  • PDF

Optimization of Tube Voltage according to Patient's Body Type during Limb examination in Digital X-ray Equipment (디지털 엑스선 장비의 사지 검사 시 환자 체형에 따른 관전압 최적화)

  • Kim, Sang-Hyun
    • Journal of the Korean Society of Radiology
    • /
    • 제11권5호
    • /
    • pp.379-385
    • /
    • 2017
  • This study identifies the optimal tube voltages depending on the changes in the patient's body type for limb tests using a digital radiography (DR) system. For the upper-limp test, the dose area product (DAP) was fixed at $5.06dGy{\ast} cm^2$, and for the lower-limb test, the DAP was fixed at $5.04dGy{\ast} cm^2$. Afterwards, the tube voltage was changed to four different stages and the images were taken three times at each stage. The thickness of the limbs was increased by 10 mm to 30 mm to change in the patient's body type. For a quantitative evaluation, Image J was used to calculate the contrast to noise ratio (CNR) and signal to noise ratio (SNR) among the four groups, according to the tube voltage. For statistical testing, the statistically significant differences were analyzed through the Kruskal-Wallis test at a 95% confidence level. For the qualitative analysis of the images, the pre-determined items were evaluated based on a 5-point Likert scale. In both upper-limb and lower-limb tests, the more the tube voltage increased, the more the CNR and SNR of the images decreased. The test on the changes depending on the patient's body shape showed that the more the thickness increased, the more the CNR and SNR decreased. In the qualitative evaluation on the upper limbs, the more the tube voltage increased, the more score increased to 4.6 at the maximum of 55kV and 3.6 at 40kV, respectively. The mean score for the lower limbs was 4.4, regardless of the tube voltage. The more either the upper or lower limbs got thicker, the more the score generally decreased. The score of the upper limps sharply dropped at 40kV, whereas that of the lower limps sharply dropped at 50kV. For patients with a standard thickness, the optimized images can be obtained when taken at 45kV for the upper limbs, and at 50kV for the lower limbs. However, when the thickness of the patient's limbs increases, it is best to set the tube voltage at 50 kV for the upper limbs and at 55 kV for the lower limbs.

Uncanny Valley Effect in the Animation Character Design - focusing on Avoiding or Utilizing the Uncanny Valley Effect (애니메이션 캐릭터 디자인에서의 언캐니 밸리 효과 연구 - 언캐니 밸리(uncanny valley)의 회피와 이용을 중심으로)

  • Ding, LI;Moon, Hyoun-Sun
    • Cartoon and Animation Studies
    • /
    • 통권43호
    • /
    • pp.321-342
    • /
    • 2016
  • The "uncanny valley" curve describes the measured results of the negative emotion response which depends on the similarity between the artificially created character and the real human shape. The "uncanny valley" effect that usually appears in the animation character design induces negative response such as fear and hatred feeling, and anxiety, which is not expected by designers. Especially, in the case of the commercial animation which mostly reply on public response, this kind of negative response is directly related to the failure of artificially created character. Accordingly, designers adjust the desirability of the character design by avoiding or utilizing the "uncanny valley" effect, inducing certain character effect that leads to the success in animation work. This manuscript confirmed the "uncanny valley" coefficient of the positive emotion character design which was based on the actual character design and animation analysis. The "uncanny valley" concept was firstly introduced by a medical scientist Ernst Jentsch in 1906. After then, a psychologist Freud applied this concept to psychological phenomenon in 1919 and a Japanese robert expert Professor Masahiro Mori presented the "uncanny valley" theory on the view of the recognition effect. This paper interpreted the "uncanny valley" effect based on these research theory outcomes in two aspects including sensation production and emotion expression. The mickey-mouse character design analysis confirmed the existence basis of the "uncanny valley" effect, which presented how mickey-mouse human shape image imposed the "uncanny valley" effect on audience. The animation work analysis investigated the reason why the produced 3D animation character should not be 100% similar to the real human by comparing the animation baby character produced by Pix company as the experimental subject to the data of the real baby with the same age. Therefore, the examples of avoiding or utilizing the "uncanny valley" effect in animation character design was discussed in detail and the four stages of sensation production and emotional change of audience due to this kind of effect was figured out. This research result can be used as an important reference in deciding the desirability of the animation character.

Germination Characteristics of Eight Species for Production of Medicinal Crops in Vertical Farms (수직농장에서 약용작물 생산을 위한 8종의 종자 발아 특성)

  • Ga Oun Lee;Hyuk Joon Kwon;Ye Lin Kim;In-Je Kang;Gyu-Sik Yang;Ju-Sung Cho;Ki-Ho Son
    • Journal of Bio-Environment Control
    • /
    • 제33권2호
    • /
    • pp.79-87
    • /
    • 2024
  • This study confirmed the effects of seed shape, temperature, and light treatment on the germination of eight species of medicinal crops to produce high-value crops in vertical farms. Eight species of medicinal seeds were selected, and the seed shape, seed length, seed width, seed length/width ratio, and one hundred seed weight were measured. The seed moisture content was confirmed. Eight species of medicinal seeds were sown, and the germination rate, germination energy, mean daily germination, and mean germination time were investigated according to temperature (15, 20, 25, 25/15℃) and light treatment. Each of the eight medicinal seeds showed different seed shapes. The moisture content of the seeds showed a moisture content rate of over 20% in the five medicinal seeds. Medicinal seeds that showed a germination rate of over 50% were Angelica gigas Nakai, Codonopsis lanceolata (Siebold & Zucc.) Benth. & Hook.f. ex Trautv., and Achyranthes bidentata Blume var. japonica Miq. seeds. A. gigas seed showed a germination rate of 67.34 ± 4.38% under 25/15℃ light conditions, and C. lanceolata seed showed a germination rate of over 50% under both temperature and light treatment conditions, especially the highest germination rate of 82.67 ± 1.46% under 15℃ dark conditions. Peucedanum japonicum Thunb. seed showed a germination rate of 52.34 ± 1.77% under dark conditions at 20℃, and the highest germination rate was 51.67 ± 3.79% under dark conditions at 15℃. The maximum germination energy was 74.00 ± 4.94% in C. lanceolata seed. The maximum mean daily germination was 14.94 ± 0.15 days in P. japonicum seed. Astragalus penduliflorus Lam. var. dahuricus (DC.) X.Y.Zhu seed showed the highest mean germination time of 34.19 ± 4.71. Through this study, it was determined that A. gigas, C. lanceolata, and A. penduliflours seeds would be suitable for production in vertical farms based on the characteristics of each medicinal seed through analysis of seed germination characteristics.

Early Life History of Korean Bullhead, Pseudobagrus fulvidraco( Pisces, Bagridae ), from Korea (동자개 Pseudobagurs fulvicraco(Pisces, Bagridae)의 초기생활사)

  • Kang, Eon-Jong;Lee, Cheol-Ho
    • Korean Journal of Ichthyology
    • /
    • 제8권1호
    • /
    • pp.83-89
    • /
    • 1996
  • The early life history of Korean bullhead, Pseudobagrus fulvidraco was studied to obtain some information required in aquaculture and reinforcement of natural population. The fertilized eggs were almost spherical in shape and demersal. The egg membranes were transparent with minute folds on the surface, causing them to stick to other substrates. Yolk is yellowish without oil droplets. The eggs just after fertilization were measuring $1.4{\pm}0.03mm$(1.3~1.5mm, n=10) and expanded to $1.7{\pm}0.08mm$(1.6~1.8mm, n=10) in diameter in 1.5 hr. The blastodisc was formed in 30 min and cleavage started in 1 hr after fertilization, and the intervals of each stage of cleavage was about 30 min at $25.0^{\circ}C$. The yolk from 32-cell stage to gastrula stage partly depressed and the depressed part moved clockwise. Hatching occurred in 53 hr after fertilization and hatched embryos had 18~19+20~21(38~40) myomeres measuring 4.2~4.3mm in total length. At the age 7 d after hatching, 4 pairs of barbels were already formed ; 1 pair on the posterior part of the nostril, 1 pair on the upper jaw, and 2 pairs on the lower jaw. And the posterior margin of caudal fin changed into two folds. The lateral band and the form of all fins were completed in 3 weeks.

  • PDF

Morphological Development of Eggs, Larvae and Juveniles of the Clidoderma asperrimum (Cypriniformes: Pleuronectidae) (줄가자미 Clidoderma asperrimum의 난발생 및 자치어 형태발달)

  • Jung, Joo-Hak;Seo, Young-Seok;Kim, Jin-Gak;Mun, Seong-Jun;Yoo, Dong-Jae;Park, Jae-Min
    • Korean Journal of Ichthyology
    • /
    • 제34권2호
    • /
    • pp.86-95
    • /
    • 2022
  • Egg development and morphological change of larvae and juvenile of the Roughscale sole, Clidoderma asperrimum, were investigated in the present study. Adult fishes were collected on the East Sea, Korea, from 2017 to 2018 and reared in a circular water tank (Ø 6×1 m) at water temperature of 12.8±1.9℃. Fertilized eggs ranged from 1.42 to 1.59 mm (mean 1.51±0.04 mm, n=50) in diameter. The eggs were spherical in shape, transparent, floating and colorless. The egg yolk was separated from the egg membrane 60 mins post-fertilization (PF), and an embryo was formed in 62 hrs PF. More than 50% of the eggs hatched within 144 hrs PF in the range of 10.2~11℃(mean 10.8℃). The size of the newly hatched larvae were 4.22~4.64 mm (mean 4.53±0.16 mm) in total length (TL), their mouth and anus were not open yet. At 10 days after hatching, the preflexion larvae reached 5.88~6.62 mm (mean 6.31±0.33 mm) in TL, and the yolk absorption was completed and the mouth began to open. At 55 days after hatching the larvae reached to flexion larvae stage and they were 10.4~13.3 mm (mean 12.7±1.3 mm) in TL, and the tip of notochord was bent upward. At 120 days after hatching the larvae reached to juvenile stage and they were 35.3~40.5 mm (mean 39.5±2.4 mm) in TL. Their all fins had completed set of the fin-rays (D. 79~94: A. 63~75) and the juveniles adopted a benthic life.

Comparison of fit and trueness of zirconia crowns fabricated by different combinations of open CAD-CAM systems

  • Eun-Bin Bae;Won-Tak Cho;Do-Hyun Park;Su-Hyun Hwang;So-Hyoun Lee;Mi-Jung Yun;Chang-Mo Jeong;Jung-Bo Huh
    • The Journal of Advanced Prosthodontics
    • /
    • 제15권3호
    • /
    • pp.155-170
    • /
    • 2023
  • PURPOSE. This study aims to clinically compare the fitness and trueness of zirconia crowns fabricated by different combinations of open CAD-CAM systems. MATERIALS AND METHODS. Total of 40 patients were enrolled in this study, and 9 different zirconia crowns were prepared per patient. Each crown was made through the cross-application of 3 different design software (EZIS VR, 3Shape Dental System, Exocad) with 3 different processing devices (Aegis HM, Trione Z, Motion 2). The marginal gap, absolute marginal discrepancy, internal gap(axial, line angle, occlusal) by a silicone replica technique were measured to compare the fit of the crown. The scanned inner and outer surfaces of the crowns were compared to CAD data using 3D metrology software to evaluate trueness. RESULTS. There were significant differences in the marginal gap, absolute marginal discrepancy, axial and line angle internal gap among the groups (P < .05) in the comparison of fit. There was no statistically significant difference among the groups in terms of occlusal internal gap. The trueness ranged from 36.19 to 43.78 ㎛ but there was no statistically significant difference within the groups (P > .05). CONCLUSION. All 9 groups showed clinically acceptable level of marginal gaps ranging from 74.26 to 112.20 ㎛ in terms of fit comparison. In the comparison of trueness, no significant difference within each group was spotted. Within the limitation of this study, open CAD-CAM systems used in this study can be assembled properly to fabricate zirconia crown.