• Korean Journal of Animal Reproduction
• /
• v.22 no.4
• /
• pp.349-357
• /
• 1998

This study was to investigate whether the viability of Hanwoo IVM/IVF/IVC blastocysts was maintained after vitrification and thawing. In vitro produced Hanwoo blastocysts were vitrified by two-step method: equilibrated in EG20 for 3 min, and then exposed in EFS40 ［40% ethylene glycol (EG), 18% ficoll and 10.26% sucrose in mDPBS containing 10% FBS ］and vitrified in L$N_2$for 30 - 45 sec. After thawing, in vitro survival was assessed as the re-expanded and hatched rates at 24 hand 48 h, respectively. The results obtained in these experiments were summarized as follows: From the 12 replicates, 52.5% of Hanwoo blastocysts were produced in vitro at day 7 after IVF. When the effects of freezing solution to the embryo survival were examined, there is no significant toxicity in exposure (100.0, 73.8%) compared to that af control group (100.0, 87.0%). However, when embryos were vitrified, high survival (86.2, 55.4%) was obtained although it was significantly lower than those of exposure and control group (p＜0.05). When the in vitro survival of vitrified embryos according to developmental stage and culture day were examined, it showed that more advanced embryo stage exhibited a significantly higher survival rate irrespective of culture day (p＜0.05). Also, even in the same development stage, the in vitro survival of day 7 embryos (re-expanded: 75.0~87.5%, hatched: 21.4~66.7%) was higher than those of day 8 embryos(re-expanded: 58.6~78.3%, hatched: 10.3~52.2%). Therefore, these results suggested that in vitro produced Hanwoo blastocysts can be successfully cryopreserved by simple two-step vitrification method using EFS40 freezing solution, particularly at the expanded and early hatching blastocyst stage regardless of embryo culture duration (day 7 or day 8 after IVF).

• Journal of the Korean Society of Radiology
• /
• v.12 no.3
• /
• pp.409-415
• /
• 2018

The development of smart devices has brought about significant changes in daily life and one of the most significant changes is the virtual reality zone. Virtual reality is a technology that creates the illusion that a 3D high-resolution image has already been created using a display device just like it does in itself. Unrealized subjects are forced to rely on audiovisual materials, resulting in a decline in the concentration of practices and the quality of classes. It used virtual reality to develop effective teaching materials for radiology students. In order to produce a video clip bridge using virtual reality, a radiology clinic was selected to conduct two exposures from July to September 2017. The video was produced taking into account the radiology and work flow chart and filming was carried out in two separate locations : in the computerized tomography unit and in the LINAC room. Prior to filming the scenario and the filming route were checked in advance to facilitate editing of the video. Modeling and mapping was performed in a PC environment using the Window XP operating system. Using two leading virtual reality camera Gopro Hero, CC pixels were produced using a 4K UHD, Adobe, followed by an 8 megapixel resolution of $3,840{\times}2,160/4,096{\times}2,160$. Total regeneration time was performed in about 5 minutes during the production of using virtual reality to prevent vomiting and dizziness. Currently developed virtual reality radiation and educational contents are being used to secure the market and extend the promotion process to be used by various institutions. The researchers will investigate the satisfaction level of radiation and educational contents using virtual reality and carry out supplementary tasks depending on the results.

• Journal of Animal Science and Technology
• /
• v.53 no.1
• /
• pp.29-34
• /
• 2011

Using the materials collected from nine farms in a three-way cross system to produce commercial pigs produced from F1 sows (Landrace $\times$ Large White) $\times$ Duroc, the power of individual discrimination and parentage of the 13 microsatellite (MS) marker set that has been suggested for individual/brand identification (traceability) was empirically tested. Initially, genotypes of the parental population ($F_1$ sows and Duroc), and commercial pigs were determined and the genotype frequency and polymorphic index were estimated using the Cervus 2.0 program. The probability of identity among genotypes of random individuals, that random half sibs and that of full sib individuals, based on the genotypes from 91 $F_1$ sows and Duroc were expected to be $4.94{\times}10^{-34}$, $8.16{\times}10^{-23}$ and $2.01{\times}10^{-08}$, respectively, using the API-CALC version 1.0 program. When commercial pigs were included, the estimates increased to $3.74{\times}10^{-35}$, $5.48{\times}10^{-25}$ and $2.96{\times}10^{-11}$, respectively. For the empirical verification of the estimated powers of individual discrimination and parentage, the parentage test was performed for 452 commercial pigs using PAPA version 2.0, and individuals with the same genotype were investigated using the Cervus version 2.0 program. Parents for all commercial pigs were successfully estimated and no identical individual was identified in the pedigree. Although the individual discriminating power was not fully verified because of the lack of individuals corresponding with the theoretical power, the 100% efficiency of parentage test was clearly confirmed. Therefore, we believe that the 13 MS marker set in conjunction with management record/information for the pig production kept in a farm/brand should be useful in the pork traceability in a brand unit.

• Journal of Animal Science and Technology
• /
• v.46 no.2
• /
• pp.227-234
• /
• 2004

This experiment was conducted at Cheonan Yonam Experimental Livestock Farm in 2001-2002 to detennine the effect of harvest date(20 April, 26 April and 4 May) on forage yield and quality of rye varieties of three different maturing groups(early maturing variety = ‘Koolgrazer’ midseason maturing variety = ‘Horni122’ and late maturing variety = ‘Danko’). The heading date of Kooigrazer, Hornil22 and Danko were 17, 22 and 29 April, respectively. Dry matter percentage increased from 15.6 to 21.6% as the harvest date was delayed from April 20 to May 4. Among the rye varieties tested, dry matter percentage of Koolgrazer, Hornil22 and Danko were 20.9, 18.8 and 16.3%, respectively. Dry matter yield increased from 1l.2 to 13.9 ton/ha as the harvest date was delayed, but no significant difference among rye varieties. As the harvest date was delayed, total digestible nutrients(TDN) yield also increased significantly from 7.4 to 8.4 ton/ha However no significant difference was found among rye varieties. Crude protein(CP) percentage decreased from 20.3 to 17.1% as the harvest date was delayed, and CP percentage of late maturing variety, Danko, was significantly higher than that of the other varieties. In content of fiber component(NDF, ADF, ADL, hemicellulose and cellulose) of rye, the late harvest date(4 May) showed the highest among harvest dates. From comparisoo within rye varieties tested, Kooigrazer, a early maturing variety had higher than a rnidseason and late maturing varieties, Hornill22 and Danko. The cellulase digestible of organic matter of dry matter(CDOMD) decreased as the harvest date was delayed. Among the rye varieties tested, the CDOMD of a early maturing variety, Koolgrazer was the lowest. Our study differences of winter rye in forage yield and quality resulting from variety maturity and harvest stage. A early maturing variety, Kooigrazer should be harvested between 24 and 28 April, Hamill 22(midseason maturing variety) harvested between 29 April and 3 May, Danko(late maturing variety) harvested between 4 and 8 May for maximum forage yield and optimum quality.

• Journal of Distribution Science
• /
• v.8 no.3
• /
• pp.17-26
• /
• 2010

Recently concerns have been raised due to the unbalanced supply of crops: the price of crops has been unstable and at one point the price went up so high that the word Agflation(agriculture+ inflation) was coined. Korea, in particular, is a small-sized country and needs to secure the stable supply of crops by investing in the produce importation at a national level. Investment in foreign produce importation is becoming more important as a measure for sufficient supply of crops, limited supply of domestic crops, weakened farming conditions worldwide, as well as recent changes in the use of crops due to the development of bio-fuels, influence of carbon emission on crops, the price increase in crops, and influx of foreign hot money. However, there are many problems with investing in foreign produce importation: lack of support from the government; lack of farming information and technology; difficulty in securing the capital; no immediate pay-off from the investment and insufficient management. Although foreign produce is originally more price-competitive than domestic produce, it loses its competiveness in the process of importation (due to high tariffs) and poor distribution system, which makes it difficult to sell in Korea. Therefore, investment in foreign produce importation is being questioned for feasibility; to make it possible, foreign produce must maintain the price-competitiveness. Especially, harvest of agricultural products depends on natural and geographical conditions of each country and those products have indigenous properties, so distribution system according to import and export of agricultural products should be treated more carefully than that of other industries. Distribution costs are differentiated into each item and include cost of sorting and wrapping, cost of wrapping materials, cost of domestic transport, cost of international transport and cost of clearing customs for import and export. So transporting and storing agricultural products generates considerable costs compared with other products. Also, due to upgrade of dietary life, needs for stability, taste and visible quality toward food including agricultural products are being raised and wrong way of storage causes decomposition of food and loss of freshness, making the storage more difficult than that in room temperature, so storage and transport in distribution of agricultural products needs specialty. In addition, because lack of specialty in distribution and circulation such as storage and wrapping does not solve limit factors in distance, the distribution and circulation has been limited to a form of import and export within short-distant region. Therefore, need for distribution out-sourcing which can satisfy specialty in managing distribution and circulation and it is needed to establish more effective distribution system. However, existing distribution system of agricultural products is exposed to various problems including problems in distribution channel, making distribution and strategy for distribution and those problems are as follows. First, in case of investment in overseas agricultural industry, stable supply of the products is difficult because areas of production are dispersed widely and influenced by outer factors due to including overseas distribution channels. Also, at the aspect of quality, standardization of products is difficult, distribution system is quite complicated and unreasonable due to long distribution channels according to international trade and financial and institutional support is not enough. Especially, there are quite a lot of ineffective factors including multi level distribution process, dramatic gap between production cost and customer's cost, lack of physical distribution facilities and difficulties in storage and transport due to lack of wrapping containers. Besides, because import and export of agricultural products has been manages under the company's own distribution according to transaction contract between manufacturers and exporting company, efficiency is low due to excessive investment in fixed costs and lack of specialty in dealing with agricultural products causes fall of value of products, showing the limit to lose price-competitiveness. Especially, because lack of specialty in distribution and circulation such as storage and wrapping does not solve limit factors in distance, the distribution and circulation has been limited to a form of import and export within short-distant region. Therefore, need for distribution out-sourcing which can satisfy specialty in managing distribution and circulation and it is needed to establish more effective distribution system. Second, among tangible and intangible services which promote the efficiency of the whole distribution, a function building distribution environment which includes distribution information, system for standard and inspection, distribution finance, system for diversification of risks, education and training, distribution administration and tax system is wanted. In general, such a function building distribution environment is difficult to be changed and supplement innovatively because its effect compared with investment does not appear immediately despite of its necessity. Especially, in case of distribution of agricultural products, as a function of collecting and distributing is performed individually through various channels, the importance of distribution information and standardization is getting more focus due to the problem of repetition of work and lack of specialty. Also, efficient management of distribution is quite difficult due to lack of professionals in distribution, so support to professional education is needed. Third, though effort to keep self-sufficiency ratio of staple food, rice is regarded as important at the government level, level of dependency on overseas of others crops is high. Therefore, plan for stable securing food resources aside from staple food is also necessary. Especially, governmental organizations of agricultural products distribution in Korea are production-centered and have unreasonable structure whose function at the aspect of distribution and consumption is quite insufficient. And development of new distribution channels which can deal with changes in distribution environment and they do not achieve actual results of strategy for distribution due to non-positive strategy for price distribution. That is, it implies the possibility that base for supply will become vulnerable because it does not mediate appropriate interests on total distribution channels such as manufacturers, wholesale dealers and vendors by emphasizing consumer protection excessively in the distribution of agricultural products. Therefore, this study examined fundamental concept and actual situation for our investment to overseas agriculture, drew necessities, considerations, problems, etc. of overseas agricultural investment and suggested improvements at the level of distribution for price competitiveness of agricultural products cultivated in overseas under five aspects; government's indirect support, distribution's modernization and distribution information function's strengthening, government's political support for distribution facility, transportation route, load and unloading works' improvement, price competitiveness' securing, professional manpower's cultivation by education and training, etc. Here are some suggestions for foreign produce importation. First, the government should conduct a survey on the current distribution channels and analyze the situation to establish a measure for long-term development plans. By providing each agricultural area with a guideline for planning appropriate production of crops, the government can help farmers be ready for importation, and prevent them from producing same crops all at the same time. Government can sign an MOU with the foreign government and promote the importation so that the development of agricultural resources can be stable and steady. Second, the government can establish a strategy for an effective distribution system by providing farmers and agriculture-related workers with the distribution information such as price, production, demand, market structure and location, feature of each crop, and etc. In order for such distribution system to become feasible, the government needs to reconstruct the current distribution system, designate a public organization for providing distribution information and set the criteria for level of produce quality, trade units, and package units. Third, the government should provide financial support and a policy to seek an efficient distribution channel for foreign produce to be delivered fresh: the government should expand distribution facilities (for selecting, packaging, storing, and processing) and transportation vehicles while modernizing old facilities. There should be another policy to improve the efficiency of unloading, and to lower the cost of distribution. Fourth, it is necessary to enact a new law covering exceptional cases for importing produce in order to maintain the price competitiveness; currently the high tariffs is keeping the imported produce from being distributed domestically. However, the new adjustment should be made carefully within the WTO regulations since it can create a problem from giving preferential tariffs. The government can also simplify the distribution channels in order to reduce the cost in the distribution process. Fifth, the government should educate distributors to raise the efficiency and to modernize the distribution system. It is necessary to develop human resources by educating people regarding the foreign agricultural environment, the produce quality, management skills, and by introducing some successful cases in advanced countries.

• Journal of Animal Science and Technology
• /
• v.49 no.5
• /
• pp.647-656
• /
• 2007

In order to investigate the effects of supplemental ionic surfactants in in vitro ruminal fermentation, N-Lauroylsarcosine sodium salt(N-LSS) and sodium dodecyl sulfate(SDS) for negative(－) ionic surfactant, and hexadecylpyridinium chloride monohydrate(HPCM) and hexadecyltrimethyl ammonium bromide(HTAB) for positive (+) ionic surfactant were supplemented by 0.05% and 0.1% into the Dehority’s artificial medium containing rice straw(1mm) as a substrate. In vitro DM digestibility, the growth of rumen mixed microbes, pH, cumulative gas production and SEM(Scanning Electron Microscopy) observation of microbial attachment on rice straw particle were investigated through the experiment composing 9 treatments (two supplemental levels of two positive ionic(+) surfactant, two supplemental levels of two negative(－) ionic surfactant) including the control. The sample collection was at 6, 12, 24, 48 and 72 h post fermentation with 3 replications per treatments. DM digestibility in treatments supplemented (+) or (－) surfactants almost stopped afterward 12 h fermentation, in vitro DM digestibility at 72 h post fermentation in the ionic surfactants was at half level of that of the control(P<0.05). Accumulative gas production in in vitro was less(P<0.05) with addition of ionic surfactants compared to the control. The amount of rumen mixed microbes recovered from in vitro incubation fluid pleateaued at 12 h post fermentation for the positive (+) ionic surfactants, but steadily increased as fermentation time elapsed for the control. Rumen microbial growth rate was significantly(P<0.05) low in the negative(－) ionic surfactant compared to the control. pH of the incubation fluid was ranged from 6.02 to 7.20, and was the highest in the negative(－) ionic surfactants, and was the lowest in the control(P<0.05). In SEM observation, rumen microbial population attached on rice straw particle was less with addition of ionic surfactants than the control. In conclusion we could not found any positive effects of negative- and positive- charged surfactants on rumunal fermentation characteristics and rumen microbial growth rates.

• Journal of Dairy Science and Biotechnology
• /
• v.33 no.1
• /
• pp.35-46
• /
• 2015

Recently, much attention has been paid to the development of a value-added food category containing probiotics so as to improve human health and prevent diseases. Among various foods, the health benefits of milk and dairy products are known to humanity, and could be attributed to the bioactive components present in milk. In fermented milk products, the health benefits could be due to suitable modulation activities produced by the action of probiotic bacteria. Besides the modification of various milk components, probiotics might also act directly as preventive and therapeutic agents against some severe diseases. Probiotics promote health via their positive effects on the immune response, stimulation of natural immunity, and modulation of the production of antimicrobial peptides, cytokines, and so on. Whey proteins, a byproduct of cheese production could also have anticarcinogenic, immunostimulatory, antimicrobial, and health-promoting activities such as improving insulin sensitivity and reducing fat deposition. Therefore, milk and dairy products containing probiotics could provide various opportunities in the field of functional foods. Additionally, these functional foods may be important in the human diet and may help improve human health and prevent diseases.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.4
• /
• pp.118-126
• /
• 2024

Recently, the alternative meat (food) market is growing rapidly due to the increase in meat consumption due to global population growth and income improvement, as well as issues such as equal welfare, carbon neutrality, and sustainability. The government is also developing a green bio convergence new industry development plan to foster alternative foods, but there are difficulties in commercialization due to the lack of technology and insufficient production facilities among domestic small and medium-sized enterprises, so it is necessary to build joint utilization facilities and equipment to resolve the difficulties faced by companies. am. In addition, small and medium-sized enterprises are having difficulty developing and commercializing plant-based meat substitutes due to a lack of technical skills, and related equipment is expensive, making it difficult to build equipment on their own. Accordingly, Jeollabuk-do is pursuing a strategy to secure the source technology for development, processing, and industrialization of plant-based substitute meat at the level of developed countries by establishing a plant-based alternative meat industrialization center. In this study, an economic feasibility analysis study was conducted when a plant-based alternative meat industrialization center is built in Jeollabuk-do. As a result of the analysis, B/C=1.32, NPV=374 million won, and IRR=4.8%, showing that there is economic feasibility in establishing an alternative meat industrialization center. In addition, as a result of analyzing the regional economic ripple effect resulting from the establishment of an industrialization center, if 38 billion won is invested in Jeollabuk-do, the nationwide production inducement effect is 74 billion won, the added value inducement effect is 29.8 billion won, and the employment inducement effect is 672 people

• Proceedings of the KOR-KST Conference
• /
• 1995.02a
• /
• pp.101-113
• /
• 1995

The objective of this research is to test the feasibility of developing a statewide truck traffic forecasting methodology for Wisconsin by using Origin-Destination surveys, traffic counts, classification counts, and other data that are routinely collected by the Wisconsin Department of Transportation (WisDOT). Development of a feasible model will permit estimation of future truck traffic for every major link in the network. This will provide the basis for improved estimation of future pavement deterioration. Pavement damage rises exponentially as axle weight increases, and trucks are responsible for most of the traffic-induced damage to pavement. Consequently, forecasts of truck traffic are critical to pavement management systems. The pavement Management Decision Supporting System (PMDSS) prepared by WisDOT in May 1990 combines pavement inventory and performance data with a knowledge base consisting of rules for evaluation, problem identification and rehabilitation recommendation. Without a r.easonable truck traffic forecasting methodology, PMDSS is not able to project pavement performance trends in order to make assessment and recommendations in the future years. However, none of WisDOT's existing forecasting methodologies has been designed specifically for predicting truck movements on a statewide highway network. For this research, the Origin-Destination survey data avaiiable from WisDOT, including two stateline areas, one county, and five cities, are analyzed and the zone-to'||'&'||'not;zone truck trip tables are developed. The resulting Origin-Destination Trip Length Frequency (00 TLF) distributions by trip type are applied to the Gravity Model (GM) for comparison with comparable TLFs from the GM. The gravity model is calibrated to obtain friction factor curves for the three trip types, Internal-Internal (I-I), Internal-External (I-E), and External-External (E-E). ~oth "macro-scale" calibration and "micro-scale" calibration are performed. The comparison of the statewide GM TLF with the 00 TLF for the macro-scale calibration does not provide suitable results because the available 00 survey data do not represent an unbiased sample of statewide truck trips. For the "micro-scale" calibration, "partial" GM trip tables that correspond to the 00 survey trip tables are extracted from the full statewide GM trip table. These "partial" GM trip tables are then merged and a partial GM TLF is created. The GM friction factor curves are adjusted until the partial GM TLF matches the 00 TLF. Three friction factor curves, one for each trip type, resulting from the micro-scale calibration produce a reasonable GM truck trip model. A key methodological issue for GM. calibration involves the use of multiple friction factor curves versus a single friction factor curve for each trip type in order to estimate truck trips with reasonable accuracy. A single friction factor curve for each of the three trip types was found to reproduce the 00 TLFs from the calibration data base. Given the very limited trip generation data available for this research, additional refinement of the gravity model using multiple mction factor curves for each trip type was not warranted. In the traditional urban transportation planning studies, the zonal trip productions and attractions and region-wide OD TLFs are available. However, for this research, the information available for the development .of the GM model is limited to Ground Counts (GC) and a limited set ofOD TLFs. The GM is calibrated using the limited OD data, but the OD data are not adequate to obtain good estimates of truck trip productions and attractions .. Consequently, zonal productions and attractions are estimated using zonal population as a first approximation. Then, Selected Link based (SELINK) analyses are used to adjust the productions and attractions and possibly recalibrate the GM. The SELINK adjustment process involves identifying the origins and destinations of all truck trips that are assigned to a specified "selected link" as the result of a standard traffic assignment. A link adjustment factor is computed as the ratio of the actual volume for the link (ground count) to the total assigned volume. This link adjustment factor is then applied to all of the origin and destination zones of the trips using that "selected link". Selected link based analyses are conducted by using both 16 selected links and 32 selected links. The result of SELINK analysis by u~ing 32 selected links provides the least %RMSE in the screenline volume analysis. In addition, the stability of the GM truck estimating model is preserved by using 32 selected links with three SELINK adjustments, that is, the GM remains calibrated despite substantial changes in the input productions and attractions. The coverage of zones provided by 32 selected links is satisfactory. Increasing the number of repetitions beyond four is not reasonable because the stability of GM model in reproducing the OD TLF reaches its limits. The total volume of truck traffic captured by 32 selected links is 107% of total trip productions. But more importantly, ~ELINK adjustment factors for all of the zones can be computed. Evaluation of the travel demand model resulting from the SELINK adjustments is conducted by using screenline volume analysis, functional class and route specific volume analysis, area specific volume analysis, production and attraction analysis, and Vehicle Miles of Travel (VMT) analysis. Screenline volume analysis by using four screenlines with 28 check points are used for evaluation of the adequacy of the overall model. The total trucks crossing the screenlines are compared to the ground count totals. L V/GC ratios of 0.958 by using 32 selected links and 1.001 by using 16 selected links are obtained. The %RM:SE for the four screenlines is inversely proportional to the average ground count totals by screenline .. The magnitude of %RM:SE for the four screenlines resulting from the fourth and last GM run by using 32 and 16 selected links is 22% and 31 % respectively. These results are similar to the overall %RMSE achieved for the 32 and 16 selected links themselves of 19% and 33% respectively. This implies that the SELINICanalysis results are reasonable for all sections of the state.Functional class and route specific volume analysis is possible by using the available 154 classification count check points. The truck traffic crossing the Interstate highways (ISH) with 37 check points, the US highways (USH) with 50 check points, and the State highways (STH) with 67 check points is compared to the actual ground count totals. The magnitude of the overall link volume to ground count ratio by route does not provide any specific pattern of over or underestimate. However, the %R11SE for the ISH shows the least value while that for the STH shows the largest value. This pattern is consistent with the screenline analysis and the overall relationship between %RMSE and ground count volume groups. Area specific volume analysis provides another broad statewide measure of the performance of the overall model. The truck traffic in the North area with 26 check points, the West area with 36 check points, the East area with 29 check points, and the South area with 64 check points are compared to the actual ground count totals. The four areas show similar results. No specific patterns in the L V/GC ratio by area are found. In addition, the %RMSE is computed for each of the four areas. The %RMSEs for the North, West, East, and South areas are 92%, 49%, 27%, and 35% respectively, whereas, the average ground counts are 481, 1383, 1532, and 3154 respectively. As for the screenline and volume range analyses, the %RMSE is inversely related to average link volume. 'The SELINK adjustments of productions and attractions resulted in a very substantial reduction in the total in-state zonal productions and attractions. The initial in-state zonal trip generation model can now be revised with a new trip production's trip rate (total adjusted productions/total population) and a new trip attraction's trip rate. Revised zonal production and attraction adjustment factors can then be developed that only reflect the impact of the SELINK adjustments that cause mcreases or , decreases from the revised zonal estimate of productions and attractions. Analysis of the revised production adjustment factors is conducted by plotting the factors on the state map. The east area of the state including the counties of Brown, Outagamie, Shawano, Wmnebago, Fond du Lac, Marathon shows comparatively large values of the revised adjustment factors. Overall, both small and large values of the revised adjustment factors are scattered around Wisconsin. This suggests that more independent variables beyond just 226; population are needed for the development of the heavy truck trip generation model. More independent variables including zonal employment data (office employees and manufacturing employees) by industry type, zonal private trucks 226; owned and zonal income data which are not available currently should be considered. A plot of frequency distribution of the in-state zones as a function of the revised production and attraction adjustment factors shows the overall " adjustment resulting from the SELINK analysis process. Overall, the revised SELINK adjustments show that the productions for many zones are reduced by, a factor of 0.5 to 0.8 while the productions for ~ relatively few zones are increased by factors from 1.1 to 4 with most of the factors in the 3.0 range. No obvious explanation for the frequency distribution could be found. The revised SELINK adjustments overall appear to be reasonable. The heavy truck VMT analysis is conducted by comparing the 1990 heavy truck VMT that is forecasted by the GM truck forecasting model, 2.975 billions, with the WisDOT computed data. This gives an estimate that is 18.3% less than the WisDOT computation of 3.642 billions of VMT. The WisDOT estimates are based on the sampling the link volumes for USH, 8TH, and CTH. This implies potential error in sampling the average link volume. The WisDOT estimate of heavy truck VMT cannot be tabulated by the three trip types, I-I, I-E ('||'&'||'pound;-I), and E-E. In contrast, the GM forecasting model shows that the proportion ofE-E VMT out of total VMT is 21.24%. In addition, tabulation of heavy truck VMT by route functional class shows that the proportion of truck traffic traversing the freeways and expressways is 76.5%. Only 14.1% of total freeway truck traffic is I-I trips, while 80% of total collector truck traffic is I-I trips. This implies that freeways are traversed mainly by I-E and E-E truck traffic while collectors are used mainly by I-I truck traffic. Other tabulations such as average heavy truck speed by trip type, average travel distance by trip type and the VMT distribution by trip type, route functional class and travel speed are useful information for highway planners to understand the characteristics of statewide heavy truck trip patternS. Heavy truck volumes for the target year 2010 are forecasted by using the GM truck forecasting model. Four scenarios are used. Fo~ better forecasting, ground count- based segment adjustment factors are developed and applied. ISH 90 '||'&'||' 94 and USH 41 are used as example routes. The forecasting results by using the ground count-based segment adjustment factors are satisfactory for long range planning purposes, but additional ground counts would be useful for USH 41. Sensitivity analysis provides estimates of the impacts of the alternative growth rates including information about changes in the trip types using key routes. The network'||'&'||'not;based GMcan easily model scenarios with different rates of growth in rural versus . . urban areas, small versus large cities, and in-state zones versus external stations. cities, and in-state zones versus external stations.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.7
• /
• pp.965-973
• /
• 2014

Three studies were conducted to investigate whether a chelated Cu can replace $CuSO_4$ as a growth promoter in pigs. In Exp. 1, a total of 240 piglets (Large White${\times}$Landrace, $7.36{\pm}0.10kg$) were randomly allocated to 1 of 3 treatments with 8 replicates and 10 piglets per pen. Treatments included a NRC control ($CuSO_4$, 6 mg/kg), two Cu supplementations from either $CuSO_4$ or $Cu(HMTBa)_2$ at 170 mg/kg. Pigs fed $Cu(HMTBa)_2$ were 6.0% heavier than pigs fed either the NRC control or 170 mg/kg $CuSO_4$ (p = 0.03) at the end of the experiment. During the 42 days of experimental period, pigs fed $Cu(HMTBa)_2$ gained 9.0% more (p = 0.01), tended to eat more feed (p = 0.09), and had better feed efficiency (p = 0.06) than those fed $CuSO_4$. Compared with the 6 mg/kg $CuSO_4$ NRC control, liver Cu was increased 2.7 times with 170 mg/kg $CuSO_4$ supplementation, and was further increased with $Cu(HMTBa)_2$ (4.5 times, p<0.05). In Exp. 2, a total of 616 crossbred piglets (PIC, $5.01{\pm}0.25kg$) were randomly allocated to 1 of 4 treatments with 7 replicates and 22 piglets per pen. Treatments included a NRC control (from $CuSO_4$), and three pharmaceutical levels of Cu (150 mg/kg) supplemented either from C$CuSO_4$, tri-basic copper chloride ($Cu_2[OH]_3C1$), or $Cu(HMTBa)_2$. Pigs fed $CuSO_4$ or $Cu(HMTBa)_2$ had better feed efficiency (p = 0.01) and tended to gain more (p = 0.08) compared with those fed the NRC control. Pigs fed $Cu_2[OH]_2C1$ were intermediate. Pigs fed $Cu(HMTBa)_2$ had the highest liver Cu, which was significantly higher than those fed ($Cu_2[OH]_3C1$) or the negative control (p = 0.01). In Exp. 3, a total of 1,048 pigs (PIC, $32.36{\pm}0.29kg$) were allotted to 6 treatments with 8 replicates per treatment and 20 to 22 pigs per pen. The treatments included a NRC control with 4 mg/kg Cu from $CuSO_4$, a positive control with 160 mg/kg Cu from $CuSO_4$, and incremental levels of $Cu(HMTBa)_2$ at 20, 40, 80, and 160 mg/kg. During the overall experimental period of 100 days, no benefit from 160 mg/kg $CuSO_4$ was observed. Pigs fed $Cu(HMTBa)_2$ had increased ADG (linear and quadratic, $p{\leq}0.05$) and feed efficiency (linear and quadratic, $p{\leq}0.05$) up to 80 mg/kg and no further improvement was observed at 160 mg/kg for the whole experimental period. Pigs fed 80 mg/kg $Cu(HMTBa)_2$ weighed 1.8 kg more (p = 0.07) and were 2.3 kg heavier in carcass (p<0.01) compared with pigs fed 160 mg/kg $CuSO_4$. In addition, loin depth was increased with increased $Cu(HMTBa)_2$ supplementation with pigs fed 80 mg/kg $Cu(HMTBa)_2$ had the greatest loin depth (p<0.05). In summary, $Cu(HMTBa)_2$ can be used to replace high $CuSO_4$ as a growth promoter in nursery and grower-finisher pigs.