• Journal of Wetlands Research
• /
• v.15 no.3
• /
• pp.423-430
• /
• 2013

An algorithm to allow shoreline movement during numerical experiment on sediment transport, deposition or resuspension for general coastal morphology is proposed here. The bed slope near shoreline, i.e. mean sea level, is influenced by bed material, tidal current, waves, and wave-induced current, but has been reported to remain within a stable range. Its annual variation is not large, either. The algorithm is adjusting the bathymetry, if the largest bed slope within shoreline band exceeds a given bed slope due to continuous erosion at zones below the shoreline. This algorithm automatically describes retreat of shoreline caused by erosion, when used within a numerical system. The algorithm was tested to a situation which includes a continuous dredging at a point, and showed satisfactory development of concentric circle contours. Next, the algorithm was tested to another situation which includes sinking of eroded part of bed plate, and produced satisfactory results, too. Finally, the algorithm was tested to a movable-bed laboratory experimental conditions. The shoreline movement behind detached breakwater was reasonably reproduced with this algorithm.

• Parasites, Hosts and Diseases
• /
• v.55 no.4
• /
• pp.445-449
• /
• 2017

The prevalence of Centrocestus formosanus metacercariae was investigated in ornamental fish purchased from a pet shop in Chiang Mai, Thailand, including Carassius auratus (goldfish), Cyprinus carpio (Koi), Poecilia latipinna (Sailfin Molly), Danio rerio (Zebrafish), and Puntigrus tetrazona (Tiger barb). The parasite species was identified by the morphology of worms as well as by a molecular approach using ITS2. The results showed that 50 (33.3%) of 150 fish examined were infected with the metacercariae. The highest prevalence was found in C. auratus (83.3%), and the highest intensity was noted in C. carpio (70.8 metacercariae/fish). The most important morphological character was the presence of 32-34 circumoral spines on the oral sucker. The phylogenetic studies using the rRNA ITS2 region revealed that all the specimens of C. formosanus in this study were grouped together with C. formosanus in GenBank database. This is the first report on ornamental fish, C. carpio, P. latipinna, D. rerio, and P. tetrazona, taking the role of second intermediate hosts of C. formosanus in Thailand. Prevention and control of metacercarial infection in ornamental fish is urgently needed.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.66.1-66.1
• /
• 2013

We present various observational results toward a small group of Young Stellar Objects (YSOs), L1251C. Observations by Spitzer Space Telescope legacy program "From Molecular Cores to Planet Forming Disks" (c2d; Evans et al. 2003) revealed that there are three YSOs within ~15" in L1251C: IRS1 (Class I), IRS2 (Class II), and IRS3 (Class II). In order to understand the molecular environment around these YSOs, we carried out the KVN single-dish observations in $HCO^+$ J=1-0, $H^{13}CO^+$ J=1-0, $N_2H^+$ J=1-0 and HCN J=1-0. $^{12}CO$ J=1-0 was also mapped in L1251C with the TRAO 14m telescope. Integrated intensity maps of high density tracers such as $H^{13}CO^+$ J=1-0, $N_2H^+$ J=1-0 and HCN J=1-0 show similar emission distributions, whose peaks are off the positions of YSOs. A compact $HCO^+$ J=1-0 outflow and an extended $^{12}CO$ J=1-0 outflow were observed, but their outflow axes are not cosistent ($HCO^+$: NW-SE, $^{12}CO$: EW). However, the highest velocity component of the $^{12}CO$ J=1-0 outflow shows similar morphology to the $HCO^+$ J=1-0 outflow, and ~ 23 % of $^{12}CO$ outflow momentum flux is loaded onto this high velocity component. Furthermore, continuum emission has been observed at 350, 450, 850 ${\mu}m$, and 1.3mm. With the KVN single dish, the 22 GHz $H_2O$ maser emission has been also monitored toward L1251C to find variations of the systemic velocity and intensity with time.

• KSBB Journal
• /
• v.26 no.3
• /
• pp.229-236
• /
• 2011

An efficient screening method was developed for rapid selection of a few overproducers of itaconic acid (IA) among the great many mutants derived from mother strains of Aspergillus terreus. For this purpose, an attempt was made to reveal the relationships of the growth rate and sporulation of each mutant on PDA solid medium with its IA productivity in the final liquid production-culture. As a result, it was possible to classify the mutated strains into 5 groups (from [A] to [E] group) according to theirmorphologies (i.e., growth rate and sporulation extent) on the PDA slants. Notably, most of the high-yielding mutants of IA were observed to belong to [A]group which had the properties of the highest growth rate and sporulation among the 5 groups, whereas the mutant groups of [C], [D] and [E] with the contrasting morphological features showed significant reductions in their IA productivities. From these results, it was concluded that the probability of selecting IA overproducing mutants could be remarkably enhanced when the mutated colonies showing faster growth rates are firstly selected on the PDA plate, and then further screening process is performed on the basis of the sporulation extents of the mutants selected. Consequently, through the application of the strategy developed in this study, costs and time involvedin the labor-intensive task of strain improvement could be reduced to a great extent, because the time-consuming liquid culture processes did not need to performed for the unfavorable mutants belonging to the groups other than group [A].

• Journal of Sensor Science and Technology
• /
• v.16 no.2
• /
• pp.120-125
• /
• 2007

The effect of $MnO_{2}$ as a sintering additive on the microstructures and the piezoelectric properties, especially mechanical quality factor, of 0.05 Pb$(Sb_{0.5}Nb_{0.5})O_{3}$-0.95 Pb$(Zr_{0.52}Ti_{0.48})O_{3}$ (PSN-PZT) piezoelectric ceramics was investigated. The samples were sintered at $1250^{\circ}C$ for 2 h. The crystal structure and surface morphology of the sample were examined using XRD and FE-SEM, respectively. A study on the influence of $MnO_{2}$ additives on the dielectric and piezoelectric properties showed that the $MnO_{2}$-added PSN-PZT system exhibited a high mechanical quality factor and well-situated piezoelectric properties. The optimized results of $d_{33}$ (319 pC/N), $k_{p}$ (55 %), and $Q_{m}$ (751.24) were obtained at 0.2 wt% $MnO_{2}$ added PSN-PZT piezoelectrics.

• Korean Journal of Biological Psychiatry
• /
• v.8 no.1
• /
• pp.3-19
• /
• 2001

Recent basic and clinical studies demonstrate a major role for neural plasticity in the etiology and treatment of depression and stress-related illness. The neural plasticity is reflected both in the birth of new cell in the adult brain(neurogenesis) and the death of genetically healthy cells(apoptosis) in the response to the individual's interaction with the environment. The neural plasticity includes adaptations of intracellular signal transduction pathway and gene expression, as well as alterations in neuronal morphology and cell survival. At the cellular level, repeated stress causes shortening and debranching of dendrite in the CA3 region of hippocampus and suppress neurogenesis of dentate gyrus granule neurons. At the molecular level, both form of structural remodeling appear to be mediated by glucocorticoid hormone working in concert with glutamate and N-methyl-D-aspartate(NMDA) receptor, along with transmitters such as serotonin and GABA-benzodiazepine system. In addition, the decreased expression and reduced level of brain-derived neurotrophic factor(BDNF) could contribute the atrophy and decreased function of stress-vulnerable hippocampal neurons. It is also suggested that atrophy and death of neurons in the hippocampus, as well as prefrontal cortex and possibly other regions, could contribute to the pathophysiology of depression. Antidepressant treatment could oppose these adverse cellular effects, which may be regarded as a loss of neural plasticity, by blocking or reversing the atrophy of hippocampal neurons and by increasing cell survival and function via up-regulation of cyclic adenosine monophosphate response element-binding proteins(CREB) and BDNF. In this article, the molecular and cellular mechanisms that underlie stress, depression, and action of antidepressant are precisely discussed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.3
• /
• pp.141-145
• /
• 2018

Ni-InGaAs shows promise as a self-aligned S/D (source/drain) alloy for n-InGaAs MOSFETs (metal-oxide-semiconductor field-effect transistors). However, limited thermal stability and instability of the microstructural morphology of Ni-InGaAs could limit the device performance. The in situ deposition of a Pd interlayer beneath the Ni layer was proposed as a strategy to improve the thermal stability of Ni-InGaAs. The Ni-InGaAs alloy layer prepared with the Pd interlayer showed better surface roughness and thermal stability after furnace annealing at $570^{\circ}C$ for 30 min, while the Ni-InGaAs without the Pd interlayer showed degradation above $500^{\circ}C$. The Pd/Ni/TiN structure offers a promising route to thermally immune Ni-InGaAs with applications in future n-InGaAs MOSFET technologies.

• Journal of Sensor Science and Technology
• /
• v.17 no.2
• /
• pp.127-132
• /
• 2008

The effect of $CeO_2$ as a sintering additive on the microstructure and the piezoelectric property of yPb$(Sb_{0.5}Nb_{0.5})O_3$-(1-y)Pb$(Zr_{0.52}Ti_{0.48})O_3$ ($0{\leq}y{\leq}0.1$, PSN-PZT) for a hypersonic sound speaker (HSS) application was investigated. The samples were sintered at $1250^{\circ}C$ for 2 h. The crystal structure and surface morphology of the samples were examined using XRD and FE-SEM, respectively. Study on the influence of $CeO_2$ additives on the dielectric and piezoelectric properties indicated that the $CeO_2$-added PSN-PZT system had a high piezoelectric properties. The optimized results of ${\varepsilon}_r=1209$, $K_p$=52% $d_{33}$=351(pC/N) and $Q_m$=1230.16 were obtained at 0.4 wt.% $CeO_2$-added PSN-PZT.

• Advances in nano research
• /
• v.5 no.3
• /
• pp.245-251
• /
• 2017

Multiwalled carbon-nanotubes (MWCNT) and micro-structured carbon, such as biochar or activated carbon (AC), have been seen to significantly increase the growth indices of certain plant species such as maize (Zea mays L.). Seed imbibition is the stage where environmental factors that affect water transport across the seed coat barrier, make a large impact. This work explores the effect on water imbibition by maize seeds when the aqueous environment surrounding the seed is diluted by small concentrations (10 and 20 mg/l) of pristine MWCNT (p-MWCNT), carboxylate functionalized MWCNT (COO-MWCNT) and AC. The degree of sensitivity of the process to (i) large structural changes is seen by utilizing the nano (the MWCNT) and the micro (the AC) allotropic forms of carbon; (ii) to small changes in the purity and morphology of the p-MWCNT by utilizing 95% pure and 99% pure p-MWCNTs of slightly differing morphologies; and (iii) to MWCNT functionalization by using highly pure (97%) COO-MWCNT. Water imbibition was monitored over a 15 hour period by Near Infrared Thermography (NIRT) and also by seed weighing. Seed surface topography was seen by SEM imaging. Analysis of the NIRT images suggests rapid seed surface topological changes with the quantity of water imbibed. While further work is necessary to arrive at a conclusive answer, this work shows that the imbibition phase of the maize seed is sensitive to the presence of MWCNT even to small differences in the purity of the p-MWCNT and to small differences in the physicochemical properties of the medium caused by the hydrophilic COO-MWCNT.

• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.399-404
• /
• 2013

In order to develop the blends with good long-term thermal stability and tensile elongation, the blends of polyphenylene sulfide (PPS) and 7 kinds of elastomer were tested. PPS/elastomer (90/10, 80/20, 70/30) blend samples were prepared by compression molding after twin screw extrusion or punching after sheet extrusion. Rheological, mechanical property and morphology of the blends were analyzed by capillary rheometer, UTM, impact tester, and SEM. For long-term thermal stability tests, the mechanical properties were measured again after the samples were stored in a convection oven for a week. The tensile strengths were almost same regardless of kinds of elastomer and the tensile elongation was the maximum for the PPS/m-EVA blend. As the content of elastomer increased, the elongation increased but delamination occurred at 30 wt% of elastomer content. The tensile strength increased but the elongation decreased seriously after thermal aging. Many problems related with PPS processing could be solved by adding a small amount of the elastomers partially compatibile with PPS and it would be applicable to develop various PPS grades.