• Journal of the Korean institute of surface engineering
• /
• v.56 no.1
• /
• pp.104-114
• /
• 2023

Three dimensional (3D) porous structures consisting of Cu@CoO core-shell-type nano-dendrites were synthesized and tested as the anode materials in lithium secondary batteries. For this purpose, first, the 3D porous films comprising Cu@Co core-shell-type nano-dendrites with various thicknesses were fabricated through the electrochemical co-deposition of Cu and Co. Then the Co shells were selectively anodized to form Co hydroxides, which was finally dehydrated to get Cu@CoO nanodendrites. The resulting electrodes exhibited very high reversible specific capacity almost 1.4~2.4 times the theoretical capacity of commercial graphite, and excellent capacity retention (~90%@50^th cycle) as compared with those of the existing transition metal oxides. From the analysis of the cumulative irreversible capacity and morphology change during charge/discharge cycling, it proved that the excellent capacity retention was attributed to the unique structural feature of our core-shell structure where only the thin CoO shell participates in the lithium storage. In addition, our electrodes showed a superb rate performance (70.5%@10.8 C-rate), most likely due to the open porous structure of 3D films, large surface area thanks to the dendritic structure, and fast electron transport through Cu core network.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4642-4646
• /
• 2023

The Tb³⁺ or Eu³⁺-doped Lu₂Gd₁Ga₂Al₃O₁₂ phosphor were fabricated by funace at 1500 ℃ for 12 h using a solid state reaction. The XRD (X-ray diffraction_Panalytical X'Pert Pro) and FE-SEM (field emission scanning electron microscope) are measured to confirm the crystalline structure and surface morphology of the phosphor. The Tb³⁺-doped Lu₂Gd₁Ga₂Al₃O₁₂ phosphor emits the lights in 470~650 nm wavelength range due to transitions from ⁵D₄ to ⁷F_j. Therefore, it shows the green region in the CIE chromaticity diagram under both UV and X-rays excitations. The Eu³⁺-doped Lu₂Gd₁Ga₂Al₃O₁₂ phosphor emits the lights in 550~750 nm wavelength range because of ⁵D_i to ⁷F_j. The emission is confirmed to be in the red region using the CIE chromaticity diagram. The Tb³⁺ or Eu³⁺-doped Lu₂Gd₁Ga₂Al₃O₁₂ phosphor shows the characteristic f-f transition with a long decay time, which is about several milliseconds. They have the high efficiency of light emission for X-ray because of their high effective Z number (Z_eff = 58.5) and density. Therefore, they are very much promising phosphors for X-ray imaging application in medical fields.

• The Korean Journal of Physiology and Pharmacology
• /
• v.20 no.5
• /
• pp.507-514
• /
• 2016

Although 3D-complex fractionated atrial electrogram (CFAE) mapping is useful in radiofrequency catheter ablation for persistent atrial fibrillation (AF), the directions and configuration of the bipolar electrodes may affect the electrogram. This study aimed to compare the spatial reproducibility of CFAE by changing the catheter orientations and electrode distance in an in -silico left atrium (LA). We conducted this study by importing the heart CT image of a patient with AF into a 3D-homogeneous human LA model. Electrogram morphology, CFAE-cycle lengths (CLs) were compared for 16 different orientations of a virtual bipolar conventional catheter (conv-cath: size 3.5 mm, inter-electrode distance 4.75 mm). Additionally, the spatial correlations of CFAE-CLs and the percentage of consistent sites with CFAE-CL<120 ms were analyzed. The results from the conv-cath were compared with that obtained using a mini catheter (mini-cath: size 1 mm, inter-electrode distance 2.5 mm). Depending on the catheter orientation, the electrogram morphology and CFAE-CLs varied (conv-cath: $11.5{\pm}0.7%$ variation, mini-cath: $7.1{\pm}1.2%$ variation), however the mini-cath produced less variation of CFAE-CL than conv-cath (p<0.001). There were moderate spatial correlations among CFAE-CL measured at 16 orientations (conv-cath: $r=0.3055{\pm}0.2194$ vs. mini-cath: $0.6074{\pm}0.0733$, p<0.001). Additionally, the ratio of consistent CFAE sites was higher for mini catheter than conventional one ($38.3{\pm}4.6%$ vs. $22.3{\pm}1.4%$, p<0.05). Electrograms and CFAE distribution are affected by catheter orientation and electrode configuration in the in-silico LA model. However, there was moderate spatial consistency of CFAE areas, and narrowly spaced bipolar catheters were less influenced by catheter direction than conventional catheters.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.9
• /
• pp.1320-1328
• /
• 2013

Three experiments were conducted to evaluate the ME value, standardized ileal digestibility (SID) of amino acids (AA) of fish meal, and the effects of single cell protein (Prosin and Protide) replacing fish meal in diet on growth performance, nutrient digestibility and intestinal morphology in weaned piglets. In Exp. 1, twenty-four barrows with initial BW of $30.8{\times}2.6kg$ were allotted to one of four dietary treatments. Diet 1 contained corn as the only energy source. The other three diets replaced 20% of the corn in diet 1 with one of the three protein feeds (fish meal, Prosin and Protide), and the DE and ME contents were determined by difference. In Exp. 2, eight barrows (initial BW of $25.6{\pm}3.2kg$) were fitted with ileal T-cannulas and allotted to a replicated $4{\times}4$ Latin square design. Three cornstarch-based diets were formulated using each of the protein feeds as the sole source of AA. A nitrogen-free diet was also formulated to measure endogenous losses of AA. In Exp. 3, one hundred and eighty piglets (initial BW of $7.95{\pm}1.59kg$) weaned at $28{\times}2d$ were blocked by weight and assigned to one of five treatments for a 28-d growth performance study, each treatment was fed to six pens with six pigs (three barrows and three gilts) per pen. The five treatments consisted of the control group (CON), which was a corn-soybean meal diet containing 5% fish meal, and the other four treatments, which replaced a set amount of fish meal with either Prosin (2.5% or 5%) or Protide (2.5% or 5%). The diets were formulated to provide same nutrient levels. The results showed that on a DM basis, both of the DE and ME contents were lower in Prosin and Protide than that of fish meal (p<0.05). The SID of CP and all essential AA were greater in fish meal than in Prosin and Protide (p<0.05). The pigs fed CON diet had greater weight gain and lower feed conversion rate (FCR) than pigs fed 5% Prosin and 5% Protide diets (p<0.05). The digestibility of CP was greater in pigs fed CON, 2.5% Prosin and 2.5% Protide diets than the pigs fed 5% Prosin and 5% Protide diets (p<0.05). Villus height in jejunum and ileum, and villus height to crypt depth ratio in the jejunum were higher (p<0.05) in pigs fed CON, 2.5% Prosin and 2.5% Protide diets compared with the 5% Prosin and 5% Protide diets. Pigs fed CON diet had greater villus height to crypt depth ratio in the ileum than the pigs fed 5% Prosin and 5% Protide diets (p<0.05). In conclusion, although Prosin and Protide contained lower ME content and SID of AA than fish meal, Prosin and Protide replacing 50% of fish meal in diet with identical nutrient levels could obtain similar performance, nutrient digestibility and intestinal morphology in weaned pigs.

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.551-559
• /
• 1997

The stability of liquid membrane in the extraction process was investigated through the extraction of the Zn component by using W/O/W emulsion type liquid surfactant membrane which was $D_2EHPA-Kerosene-Span$ $80-H_2SO_4$ system. The highest stability for liquid membrane through the Zn extraction process was obtained under the following conditions. That conditions were that span 80 concentration, as surfactant, of 2~3 vol.%;$D_2EHPA$ concentration, as extractant, of 5~7 vol.%;paraffin oil concentration, as membrane strengthening agent, of 10 vol.%;emulsion volume ratio to the external aqueous phase volume of 0.1, and internal aqueous phase volume ratio to the organic phase volume of 1.0.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.5756-5762
• /
• 2015

This paper has studied the lotus effect of the biomimetic engineering that is inspired from the nature. The biomimetic engineering has been improved with the nanotechnology. This paper has observed the hydrophobic property of the surface of the lotus leaf by using the scanning electron microscope (SEM) and atomic force microscope (AFM). The nano-scale of the hydrophobic lotus leaves are maximized the surface tension of water. The general grass leaf has been compared with the lotus leaf through the SEM and AFM - in the viewpoint of the 2D and 3D morphology. Also, The pre-existing of the hydrophobic theory was investigated and compared with the experimental observations for the lotus leaf.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.2 no.1
• /
• pp.47-59
• /
• 2015

A bioactive and multifunctional elastin-like polymer (ELP) was produced by genetic engineering techniques to develop new artificial matrices with the ability to mimic the extracellular matrix (ECM). The basic composition of this ELP is a thermo- and pH-sensitive elastin pentapeptide which has been enriched with RGD-containing domains, the RGD loop of fibronectin, for recognition by integrin receptors on their sequence to promote efficient cell attachment. Hydrogels of this RGD-containing polymer were obtained by crosslinking with hexamethylene diisocyanate, a lysine-targeted crosslinker. These materials retain the "smart" nature and temperature-responsive character, and the desired mechanical behavior of the elastin-like polymer family. The influence of the degree of crosslinking on the morphology and properties of the matrices were tested by calorimetric techniques and scanning electron microscopy (SEM). Their mechanical behavior was studied by dynamical mechanical analysis (DMA). These results show the potential of these materials in biomedical applications, especially in the development of smart systems for tissue engineering.

• Elastomers and Composites
• /
• v.41 no.1
• /
• pp.19-26
• /
• 2006

In this study, the effect of thermal aging temperature on the weight loss, glass transition temperature, and morphology of epoxy adhesives cured with amine (D-230), amide (G-5022), and anhydride (HN-2200) was investigated. As a result, the weight loss of three specimens was increased with increasing the thermal aging temperature. The result was attributed to the thermal aging which was occurred at the surface of adhesive specimens at high aging temperature, resulting in increasing the weight loss of the specimens. According to the DSC result, the glass transition temperature of DGEBA/D-230 and DGEBA/G-5022 samples war increased as the aging temperature increased, whereas the glass transition temperature of DGEBA/HN-2200 samples was constant above aging temperature of $150^{\circ}C$ and aging tine of 7 days. The SEM result indicated that the surface of DGEBA/G-5022 specimen showed more rough topography than that of DGEBA/D-230 or DGEBA/HN-2200 specimen after thermal aging. This could be correlated with the result of weight loss.

• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.247-251
• /
• 2023

Lecithin can self-assemble into reverse spherical micelles in organic solvents due to its amphiphilic properties. With additives such as D-sorbitol and water, the reverse spherical micelles are transformed into reverse cylindrical micelles by the morphology change of lecithin molecules. In this study, the rheological properties of lecithin/D-sorbitol/water mixtures were investigated. In addition, the small angle X-ray scattering (SAXS) technique was used to examine the shape and size of the formed nanostructures related to their rheological properties. Such mixtures are expected to be used in drug delivery and oleogels because of their high viscosity and viscoelastic behavior.

• Journal of Plant Biotechnology
• /
• v.47 no.4
• /
• pp.337-344
• /
• 2020

Plant growth-promoting microorganisms promote plant growth by supplying nutrients to roots and interacting with the intrinsic factors in plants through volatile organic compounds (VOCs). In this study, we evaluated the effect of UOS, plant growth-promoting fungi (PGPF) isolated from previous study, on the growth of Nicotiana tabacum L. var Xanthi nc. Phylogenetic analysis and GC-MS were used to identify the fungal species and the VOCs emitted by the UOS, respectively. The fresh weight of UOS-treated Nicotiana tabacum L. was 3.8 and 4.2-fold higher than that of the control groups grown in vertical and I-plates, respectively. Moreover, in the UOS-treated plants, the length of the primary root was half and the number of lateral roots were twice compared to those in control plants. The UOS was identified as Phoma sp. by studying spore and mycelial morphology and using phylogenetic analysis. GC-MS revealed that the VOC emitted by the UOS was hexamethylcyclotrisiloxane (D3). These results suggest that the UOS of Phoma sp. influences plant growth and root development through D3. We expect this UOS and its VOC, D3 to be utilized in the future to increase growth and enhance yield for other plants.