• The Korean Journal of Mycology
• /
• v.47 no.3
• /
• pp.209-218
• /
• 2019

During a survey of fungal diversity in Korea, two fungal strains, KNU17-1 and KNU17-199, were isolated from paddy field soil in Yangpyeong and Sancheong, respectively, in Korea. These fungal isolates were analyzed based on their morphological characteristics and the molecular phylogenetic analysis of the internal transcribed spacer (ITS) rDNA sequences. On the basis of their morphology and phylogeny, KNU17-1 and KNU17-199 isolates were identified as Albifimbria verrucaria and Deconica coprophila, respectively. To the best of our knowledge, A. verrucaria and D. coprophila have not yet been reported in Korea. Thus, this is the first report of these species in Korea.

• Journal of Korean Vacuum Science & Technology
• /
• v.3 no.1
• /
• pp.54-58
• /
• 1999

We deposited diamond-like carbon (DLC) films using ion beam sputtering of a graphite target on flat substrates for use as a thin film field emitter. An n-type silicon wafer, titanium-coated silicon, and indium tin oxide (ITO) coated glass were used as a substrate. All films exhibited a sudden increase in the emission after a breakdown occurred at high voltage. The morphology of the films after the breakdown depended on the substrate. On ITO and Ti substrates, the DLC film peeled off upon breakdown, but on the Si substrate the surface melting due to breakdown resulted in the formation of various structures such as a sharp point, mound, and crater. By scanning the deformed surface with a tip anode, we found that the emission was concentrated at the deformed sites, indicating that the field enhancement due to the morphology change was responsible for the increased emission.

• Journal of the Optical Society of Korea
• /
• v.12 no.2
• /
• pp.98-102
• /
• 2008

Optical Coherence Tomography (OCT) is an important noninvasive medical imaging technique that can reveal subsurface structures of biological tissue. OCT has demonstrated a good correlation with histology in sufficient resolution to identify morphological changes in articular cartilage to differentiate normal through progressive stages of degenerative joint disease. Current OCT systems provide individual cross-sectional images that are representative of the tissue directly under the scanning beam, but they may not fully demonstrate the degree of degeneration occurring within a region of a joint surface. For a full understanding of the nature and degree of cartilage degeneration within a joint, multiple OCT images must be obtained and an overall assessment of the joint surmised from multiple individual images. This study presents frequency domain three-dimensional (3-D) OCT imaging of degenerative joint cartilage extracted from bovine knees. The 3-D OCT imaging of articular cartilage enables the assembly of 126 individual, adjacent, rapid scanned OCT images into a full 3-D image representation of the tissue scanned, or these may be viewed in a progression of successive individual two-dimensional (2-D) OCT images arranged in 3-D orientation. A fiber-based frequency domain OCT system that provides cross-sectional images was used to acquire 126 successive adjacent images for a sample volume of $6{\times}3.2{\times}2.5\;mm^3$. The axial resolution was $8\;{\mu}m$ in air. The 3-D OCT was able to demonstrate surface topography and subsurface disruption of articular cartilage consistent with the gross image as well as with histological cross-sections of the specimen. The 3-D OCT volumetric imaging of articular cartilage provides an enhanced appreciation and better understanding of regional degenerative joint disease than may be realized by individual 2-D OCT sectional images.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.248-248
• /
• 2009

Recently, the control of size, morphology and dimensionality in inorganic materials has been rapidly developed into a promising field in materials chemistry. 3D nanostructured flower-like ZnO architecture with different size and shapes have been simply synthesized via a hydrothermal process, using zinc acetate and ammonium hydroxide as reactants.[1] In this study, the Zno thin-films were deposited by RF magnetron sputtering in other to get high adhesion and uniformity of 3D nanostructured flower-like ZnO architecture on a $SiO_2$ substrate. The XRD patterns identified that the obtained the nanocrystallized ZnO architecture exhibited a wurtzite structure. SEM images illustrated that the flower-like ZnO bundles consisted of flower-like or chestnut bur, which were characterized by polycrystalline and [0001] preferential orientation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.10
• /
• pp.884-889
• /
• 2009

Recently, the control of size, morphology and dimensionality in inorganic materials has been rapidly developed into a promising field in materials chemistry. 3D nanostructured flower-like ZnO architecture with different size and shapes have been simply synthesized by hydrothermal process, using zinc acetate and ammonium hydroxide as reactants. In this study, the ZnO thin-films were deposited by RF magnetron sputtering in other to get high adhesion and uniformity of 3D nanostructured flower-like ZnO architecture on a $SiO_2$ substrate. The XRD patterns identified that the obtained the nanocrystallized ZnO architecture exhibited a wurtzite structure. SEM images illustrated that the flower-like ZnO bundles consisted of flower-like or chestnut bur, which were characterized by polycrystalline and (002) preferential orientation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.7
• /
• pp.1035-1040
• /
• 2003

This experiment was conducted to investigate the effects of fat sources on growth performance, nutrient digestibility, serum traits and intestinal morphology in weaning pigs. A total of 128 weaning pigs (Landrace${\times}$Large White${\times}$Duroc, $21{\pm}2$ days of age, $5.82{\pm}0.13kg$ of average initial body weight) were allotted in a randomized complete block (RCB) design with four treatments: 1) corn oil, 2) soybean oil, 3) tallow and 4) fish oil. Each treatment had 8 replicates with 4 pigs per pen. During phase I period (d 0 to 14), pigs fed corn oil or soybean oil diet tended to show higher ADG and FCR than any other treatments although there was no significant difference. During phase II period (d 15 to 28), pigs fed corn oil diet showed better ADG and ADFI than pigs fed soybean oil, tallow or fish oil. For overall period, growth performance of weaning pigs was improved (p<0.05) when pigs were fed soybean oil or corn oil. Apparent digestibility of energy and fat was improved when pigs were fed corn oil diet (p<0.05). Supplementation of corn oil resulted in higher serum triglyceride concentration than the other treatments (p<0.05). However, there was a lower cholesterol concentration when corn oil was provided compared to tallow or fish oil. Pigs fed corn oil tended to have increased villus height compared with soybean oil, tallow or fish oil treatment (p<0.05). This experiment suggested that vegetable oils such as corn oil or soybean oil, were much better fat source for improving growth performance of weaning pigs.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.1
• /
• pp.33-42
• /
• 2001

Recently, the interests in the 3D image, generated from the range data and CAD, have exceedingly increased, accordingly a various 3D image database is being constructed. The efficient and fast scheme to access the desired image data is the important issue in the application area of the Internet and digital library. However, it is difficult to manage the 3D image database because of its huge size. Therefore, a proper descriptor is necessary to manage the data efficiently, including the content-based search. In this paper, the proposed shape descriptor is based on the voxelization of the 3D image. The medial axis transform, stemming from the mathematical morphology, is performed on the voxelized 3D image and the graph, which is composed of node and edge, is generated from skeletons. The generated graph is adequate to the novel shape descriptor due to no loss of geometric information and the similarity of the insight of the human. Therefore the proposed shape descriptor would be useful for the recognition of 3D object, compression, and content-based search.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1573-1576
• /
• 1997

Thin films of $BaTiO_3$ system were prepared by radio frequency (rf)/dc magnetron sputtering method. We have investigated crystal structure, surface morphology and PTCR(positive-temperature coefficient of resistance) characteristics of the specimen depending on second heat - treatment temperatures. Scanning electron microscope(SEM) image of $BaTiO_3$ thin films shows that the specimen heat treated in between 900 and 1100[$^{\circ}C$] shows a grain growth. At 1100[$^{\circ}C$], the specimen stops grain-growing and becomes a crystal. A resistivity-temperature characteristics of the specimen depends on the doping concentrations of Mn.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.21 no.3
• /
• pp.253-260
• /
• 2021

Therapeutic injections into the craniofacial region can be a complex procedure because of the nature of its anatomical structure. This technical note demonstrates a process for creating an extra-oral template to inject therapeutic substances into the temporomandibular joint and the lateral pterygoid muscle. The described process involves merging cone-beam computed tomography data and extra-oral facial scans obtained using a mobile device to establish a correlated data set for virtual planning. Virtual injection points were simulated using existing dental implant planning software to assist clinicians in precisely targeting specific anatomical structures. A template was designed and then 3D printed. The printed template showed adequate surface fit. This innovative process demonstrates a potential new clinical technique. However, further validation and in vivo trials are necessary to assess its full potential.

• Journal of Korean Society on Water Environment
• /
• v.29 no.4
• /
• pp.497-503
• /
• 2013

The morphological characteristics of granules, which were generated in lab-scale sequencing batch reactor (SBR) for simultaneous nitrogen and phosphorus removal with denitrifying phosphorus accumulating organism (dPAO) were identified. Granular sludge was fully developed in the anaerobic-anoxic (An-Ax) SBR after 180 days of SBR operation. The average diameter of granular sludge was 2.2 mm and rod-type organisms dominated in the granules. In addition, about 1.0 mm of white precipitate was observed in the core of the granule, and the material was confirmed that it is very similar to hydroxyapatite $(HAP;\;Ca_5(PO_4)_3(OH))$ by X-ray diffraction) analysis.