• Archives of Plastic Surgery
• /
• v.35 no.1
• /
• pp.28-35
• /
• 2008

Purpose: The pedicle of transverse rectus abdominis myocutaneous(TRAM) flap and deep inferior epigastric arterial perforator flap is deep inferior epigastic artery (DIEA) and accurate anatomic knowledge about perforator of DIEA is very important for the elevation of these flap. The authors investigated a detailed vascular network of perforator of DIEA in Koreans. Methods: 24 fresh cadavers were studied. Among them, 15 were examined based on the plain X-ray examination for the distribution and location of perforator of DIEA. And 9 fresh cadavers were examined based on the 3-dimensional computed tomography(CT) study for the distance between ending point of perforator of DIEA and mother artery, the distance between most medial mother artery and midline, the distance between most lateral mother artery and midline, and the running type of perforators of DIEA. Results: Based on the plain X-ray examination, suitable(external diameter$${\geq_-}0.5mm$$) perforators of DIEA are located between the level of umbilicus and 8 cm below it. Based on the 3D-CT study, average distance between the ending point of perforator of DIEA and the mother artery is 30.26 mm on the left, 28.62 mm on the right, respectively. The average distance between most medial mother artery and midline is 17.13 mm on the left, 15.76 mm on the right, respectively. The average distance between most lateral mother artery and midline is 56.31 mm on the left, 50.90 mm on the right, respectively. The main running course of suitable perforators of DIEA is type a, which is a direct musculocutaneous perforator vessel from main vascular axis passing outward to join the subdermal plexus, directly. Conclusion: 3-dimensional computed tomography study as well as plain X-ray examination provided more accurate and detail informations about perforators of DIEA in Koreans. These informations will help us understand the detailed vascular anatomy and operation with ease and safe in the lower abdomen of Koreans.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.4
• /
• pp.115-125
• /
• 2017

In current, as the release of national base map with an equivalent scale and accuracy for the whole territory areas in South Korea, rapid spatial information industry such as national land development, GIS, and car navigation are used in a variety of spatial information industry as decision making method, and a lot of research and policies are proposed for the wide expansion of spatial information industry. For this, as of 2013, it contributes to the latest trend of spatial information field in order to solve the problems for the latest trend of spatial information, replacing modification of base maps as dividing the whole territory to zone with policy transformation by ordinary modifications. Therefore, this paper evaluates the possibility of modification and renewal of national base maps(scale: 1:5,000) using drones which currently get the limelight from a variety of research fields and industries. In particular, as a result of overlapping orthophoto, 3D point clouds extracted from images acquired by low-cost drones, and digital maps which are applied for the tasks of modification and renewal, it presents 0.2m precision and 0.1m accuracy. This means that drone-based photorgammetry technique can be fully utilized in the tasks of digital map modification and renewal because it conforms the error range of work regulation in making the national base maps(scale 1: 5000).

• Land and Housing Review
• /
• v.13 no.1
• /
• pp.141-150
• /
• 2022

Responding to the increasing demand for research on seismic resistance of structures triggered by a large-scale earthquake in Korea, the Ministry of the Interior and Safety revised the typical application of the existing seismic design standards with the national seismic performance target enhanced. Therefore, in this paper, the dam body of the aged Test-Bed and the penstock with fluid were modeled by the three-dimensional finite element method by introducing several variables. The current seismic design standard law confirmed the safety of the dam structure and penstock against seismic waves. As a result of the 3D finite element analysis, the stress change due to the water impact of the penstock was minimal, and it was confirmed that the effect of the hydraulic pressure was more significant than the water impact in the earthquake situation. When the hydrostatic pressure is in the form of SPH, it was analyzed that the motion of the fluid and the location of stress caused by the earthquake can be effectively represented, and it will be easier to analyze the weak part. As a result of the analysis, which considers penstock's corrosion, the degree of stress dispersion gets smaller because the penstock is embedded in the body. The stress result is minimal, less than 1% of the yield stress of the steel. In addition, although there is a possibility of micro-tensile cracks occurring in the inlet of the dam, it has not been shown to have a significant effect on the stress increa.

• Journal of Internet Computing and Services
• /
• v.22 no.1
• /
• pp.41-50
• /
• 2021

Cyber Kill Chain is derived from Kill chain of traditional military terms. Kill chain means "a continuous and cyclical process from detection to destruction of military targets requiring destruction, or dividing it into several distinct actions." The kill chain has evolved the existing operational procedures to effectively deal with time-limited emergency targets that require immediate response due to changes in location and increased risk, such as nuclear weapons and missiles. It began with the military concept of incapacitating the attacker's intended purpose by preventing it from functioning at any one stage of the process of reaching it. Thus the basic concept of the cyber kill chain is that the attack performed by a cyber attacker consists of each stage, and the cyber attacker can achieve the attack goal only when each stage is successfully performed, and from a defense point of view, each stage is detailed. It is believed that if a response procedure is prepared and responded, the chain of attacks is broken, and the attack of the attacker can be neutralized or delayed. Also, from the point of view of an attack, if a specific response procedure is prepared at each stage, the chain of attacks can be successful and the target of the attack can be neutralized. The cyber command and control system is a system that is applied to both defense and attack, and should present defensive countermeasures and offensive countermeasures to neutralize the enemy's kill chain during defense, and each step-by-step procedure to neutralize the enemy when attacking. Therefore, thist paper proposed a cyber kill chain model from the perspective of defense and attack of the cyber command and control system, and also researched and presented the threat classification/analysis/prediction framework of the cyber command and control system from the defense aspect

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.217-223
• /
• 2013

Background: Hepatocellular carcinoma (HCC) is one of the most common cancers worldwide, and the outcomes for patients are still poor. It is important to determine the original type of synchronous multinodular HCC for preoperative assessment and the choice of treatment therapy as well as for the prediction of prognosis after treatment. Aims: To analyze clinicopathologic characteristics and prognoses in patients with multicentric occurrence (MO) and intrahepatic metastasis (IM) of synchronous multinodular hepatocellular carcinoma (HCC). Methods: The study group comprised 42 multinodular HCC patients with a total of 112 nodules. The control group comprised 20 HCC patients with 16 single nodular HCC cases and 4 HCC cases with a portal vein tumor emboli. The mitochondrial DNA (mtDNA) D-loop region was sequenced, and the patients of the study group were categorized as MO or IM based on the sequence variations. Univariate and multivariate analyses were used to determine the important clinicopathologic characteristics in the two groups. Results: In the study group, 20 cases were categorized as MO, and 22 as IM, whereas all 20 cases in the control group were characterized as IM. Several factors significantly differed between the IM and MO patients, including hepatitis B e antigen (HBeAg), cumulative tumor size, tumor nodule location, cirrhosis, portal vein and/or microvascular tumor embolus and the histological grade of the primary nodule. Multivariate analysis further demonstrated that cirrhosis and portal vein and/or microvascular tumor thrombus were independent factors differentiating between IM and MO patients. The tumor-free survival time of the MO subjects was significantly longer than that of the IM subjects ($25.7{\pm}4.8$ months vs. $8.9{\pm}3.1$ months, p=0.017). Similarly, the overall survival time of the MO subjects was longer ($31.6{\pm}5.3$ months vs. $15.4{\pm}3.4$ months, p=0.024). The multivariate analysis further demonstrated that the original type (p=0.035) and Child-Pugh grade (p<0.001) were independent predictors of tumor-free survival time. Cirrhosis (p=0.011), original type (p=0.034) and Child-Pugh grade (p<0.001) were independent predictors of overall survival time. Conclusions: HBeAg, cumulative tumor size, tumor nodule location, cirrhosis, portal vein and/or microvascular tumor embolus and histological grade of the primary nodule are important factors for differentiating IM and MO. MO HCC patients might have a favorable outcome compared with IM patients.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.145-153
• /
• 2021

Purpose: The purpose of this study is to evaluate the ovarian dose during radiation therapy for breast cancer in women of childbearing age through an experiment. The ovarian dose is evaluated by comparing and analyzing between the calculated dose in the treatment planning system according to the treatment technique and the measured dose using a thermoluminescence dosimeter (TLD). The clinical usefulness of lead (Pb) apron is investigated through dose analysis according to whether or not it is used. Materials and Methods: Rando humanoid phantom was used for measurement, and wedge filter radiation therapy, 3D conformal radiation therapy, and intensity modulated radiation therapy were used as treatment techniques. A treatment plan was established so that 95% of the prescribed dose could be delivered to the right breast of the Rando humanoid phantom 3D image obtained using the CT simulator. TLD was inserted into the surface and depth of the virtual ovary of the Rando hunmanoid phantom and irradiated with radiation. The measurement location was the center of treatment and the point moved 2 cm to the opposite breast from the center of the Rando hunmanoid phantom, 5cm, 10cm, 12.5cm, 15cm, 17.5cm, 20cm from the boundary of the right breast to the center of treatment and downward, and the surface and depth of the right ovary. Measurements were made at a total of 9 central points. In the dose comparison of treatment planning systems, two wedge filter treatment techniques, three-dimensional conformal radiotherapy, and intensity-modulated radiation therapy were established and compared. Treatments were compared, and dose measurements according to the use of lead apron were compared and analyzed in intensity-modulated radiation therapy. The measured value was calculated by averaging three TLD values for each point and converting using the TLD calibration value, which was calculated as the point dose mean value. In order to compare the treatment plan value with the actual measured value, the absolute dose value was measured and compared at each point (%Diff). Results: At Point A, the center of treatment, a maximum of 201.7cGy was obtained in the treatment planning system, and a maximum of 200.6cGy was obtained in the TLD. In all treatment planning systems, 0cGy was calculated from Point G, which is a point 17.5cm downward from the breast interface. As a result of TLD, a maximum of 2.6cGy was obtained at Point G, and a maximum of 0.9cGy was obtained at Point J, which is the ovarian dose, and the absolute dose was 0.3%~1.3%. The difference in dose according to the use of lead aprons was from a maximum of 2.1cGy to a minimum of 0.1cGy, and the %Diff value was 0.1%~1.1%. Conclusion: In the treatment planning system, the difference in dose according to the three treatment plans did not show a significant difference from 0.85% to 2.45%. In the ovary, the difference between the Rando humanoid phantom's treatment planning system and the actual measured dose was within 0.9%, and the actual measured dose was slightly higher. This did not accurately reflect the effect of scattered radiation in the treatment planning system, and it is thought that the dose of scattered radiation and the dose taken by CBCT with TLD inserted were reflected in the actual measurement. In dosimetry according to the with or without a lead apron, when a lead apron was used, the closer the distance from the treatment range, the more effective the shielding was. Although it is not clinically appropriate for pregnancy or artificial insemination during radiotherapy, the dose irradiated to the ovaries during treatment is not expected to significantly affect the reproductive function of women of childbearing age after radiotherapy. However, since women of childbearing age have constant anxiety, it is thought that psychological stability can be promoted by presenting the data from this study.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.3
• /
• pp.229-239
• /
• 2015

In light of the significant increase in the quantities of goods transported and the development of the shipping industry, the frequency of usage of port structures has increased; yet, the government's budget for the shipping & port of SOC has been reduced. Port structures require systematically effective maintenance and management trends that address their growing frequency of usage. In order to construct a productive maintenance system, it is essential to develop deterioration models of port structures that consider various characteristics, such as location, type, use, constructed level, and state of maintenance. Processes for developing such deterioration models include examining factors that cause the structures to deteriorate, collecting data on deteriorating structures, and deciding methods of estimation. The techniques used for developing the deterioration models are multiple regression analysis and Markov chain theory. Multiple regression analysis can reflect changes over time and Markov chain theory can apply status changes based on a probabilistic method. Along with these processes, the deterioration models of open-type and gravity-type wharfs were suggested.

• Journal of Gastric Cancer
• /
• v.20 no.3
• /
• pp.290-299
• /
• 2020

Purpose: Recently, totally laparoscopic gastrectomy has been gradually accepted by surgeons worldwide for gastric cancer treatment. Complete dissection of the lymph nodes and the establishment of the surgical margin are the most important considerations for curative gastric cancer surgery. Previous studies have demonstrated that indocyanine green (ICG)-traced laparoscopic gastrectomy significantly improves the completeness of lymph node dissection. However, it remains difficult to identify the tumor location intraoperatively for gastric cancers that are staged ≤T3. Here, we investigated the feasibility of ICG fluorescence for lymph node mapping and tumor localization during totally laparoscopic distal gastrectomy. Materials and Methods: Preoperative and perioperative data from consecutive patients with gastric cancer who underwent a totally laparoscopic distal gastrectomy were collected and analyzed. The patients were categorized into the ICG (n=61) or the non-ICG (n=75) group based on whether preoperative endoscopic mucosal ICG injection was performed. Results: The ICG group had a shorter operation time and less intraoperative blood loss. Moreover, significantly more lymph nodes were harvested in the ICG group than the non-ICG group. No pathologically positive margin was found and there was no significant difference in either the proximal or distal surgical margins between the 2 groups. Conclusions: Near-infrared fluorescence imaging with ICG can be successfully used in totally laparoscopic distal gastrectomy, and it contributes to both the completeness of D2 lymph node dissection and confirmation of the gastric transection line. Well-designed prospective randomized studies are needed in the future to fully validate our findings.

• Food Science of Animal Resources
• /
• v.40 no.4
• /
• pp.497-511
• /
• 2020

This study aimed at comparing the storage stability, fatty acids profile, volatile flavor compounds and eating quality of Hanwoo beef longissimus thoracis (LT) muscles between two marbling morphological groups (fineness and coarseness). The 1⁺ grade Hanwoo LT muscles were measured for marbling fleck morphology at the 13^th thoracic vertebrae location by using computerized image analysis. Results reveal that both marbling groups had similar proximate composition (protein, fat, moisture and collagen), color and technological quality traits (p>0.05). However, the coarse marbling group presented greater C18:2n6 and polyunsaturated fatty acids contents compared to the fine marbling group (p<0.05). Furthermore, the fine marbling group presented lower volatile basic nitrogen (VBN) and 2-thiobarbituric acid reactive substance (TBARS) contents compared to the coarse marbling group after 14 d storage (p<0.05). Also, higher amounts of C18:2n6 oxidation-derived volatile compounds such as hexanal and 3-ethyl-2-methyl-1,3-hexadiene, were found in the coarse marbling group. In term of sensory aspects, the finely-marbled group received higher scores of flavor and taste compared to the coarse marbling group (p<0.05). Overall, the marbling flecks morphology partially showed its effects on the storage stability, fatty acids profile and eating quality of the 1⁺ grade Hanwoo beef LT muscle.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.2
• /
• pp.501-511
• /
• 2018

As a result of the recent revision of the 'Guideline for Installation and Management of Fire Prevention Facility in Road Tunnels', the thermal buoyancy has to be taken into account when calculating the capacity of jet fans for smoke control in tunnel fires. However, there is no detailed methodologies for considering thermal buoyancy, so further study is needed. In this study, the thermal buoyancy in the tunnel is calculated by 3-D numerical simulation to consider the thermal buoyancy in case of fire in tunnels, and the relationship between heat buoyancy and vehicle drag, And the method of calculating the capacity of the jet fan for smoke control in tunnels. According to the analysis results, heat buoyancy acts as a resistance force in the case of a down-slope tunnel, and the pressure rise of jet fan for smoke control is not simply determined by the value of heat buoyancy at the entrance of the tunnel and the value of the vehicle drag at the exit. And it is analyzed that it is necessary to carry out a comprehensive review according to the location of the fire vehicle in tunnels.