• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.269-272
• /
• 2006

The heat and smoke which generated by subway under fire is one of the most harmful factor in air tighten underground station. To prevent this, Trackway Exhaust System(TES) can be used. The heat released from the train running in the tunnel raises the temperature at the platform and the trackway, and thus proper ventilation system is required for comfortable underground environment. When the fire is occurred, TES is operated as smoke exhaust mode from normal ventilation mode. In the present study, the subway station which is one of the line number 9 in Seoul subway is modeled, and fired situation is simulated with several ventilation mode of ventilation system in trackway. For this simulation whole station is modeled. Non steady state 3D simulation which considered train under fire is entering to the station is performed. Temperature and smoke distribution in platform and trackway are compared. To represent heat by fire, heat flux was given to the fired carriage, also to describe smoke by fire, concentration of CO is represented. As the result of present study, temperature and smoke distribution is different as the method of ventilation in trackway and platform is changed. In over side of trackway, the fan must be operated as exhaust mode for efficient elimination of heat and smoke, and supply mode of fan operation in under side shows better distribution of heat and smoke. The ventilation system which is changed from ventilation mode to exhaust mode can be applied to control heat and smoke under fire.

• 상하수도학회지
• /
• 제20권6호
• /
• pp.911-918
• /
• 2006

This study was conducted to evaluate the effect of the launder type on settling performance and hydrodynamic behavior within the two certain full-scale sedimentation basins (each flow rate/one basin; $10,000m^3/d$); one is the transverse typed launder(existing basin) and the other is building the finger type launder in combination with the longitudinal baffle. Comparative experimental investigations have been carried out through residual turbidity and particle concentration measurements in each effluent from two basins with the transverse and the finger type launders, respectively. From the experimental results, we could observe that turbidity removal rate in the finger type launder basin (modified basin) is about 30% higher than that in the transverse type launder basin (existing basin). Also, from the measurement of total particle concentration in each effluent, the removal efficiency was improved about 27% within modified basin compared to the existing basin. In order to explain the comparative experimental results and investigate the hydridynamic behavior within each basin in more detail, we conducted computational fluid dynamics (CFD) simulation and verified simulation results with acoustic Doppler velocimetry (ADV) technique. From the CFD simulation, it was investigated that extreme upward flow occurs underneath of the transverse launder. On the other hand, in the case of modified basin, the upward flow, which occurred in the beneath of launder, was much less than that in the existing basins.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.174-175
• /
• 2005

The purpose of this study is focused on the analysis of 3D complex flow and performance characteristics of a centrifugal pump with volute casing. The numerical analysis was performed by commercial code CFX-10 according to the variation of flow rate, which is changing from 5.847$m^3$/min to 6.865$m^3$/min. The rated rotational speed of close type impeller is 1750rpm. Turbulence model, k-${\omega}$ SST was selected to guaranty more accurate prediction of flow separation. The ICEM-CFD 10, reliable grid generation software was also adapted to secure high quality grid generation necessary for the reliable numerical simulation. The experimental results such as static head, brake horse power and efficiency of the centrifugal pump were compared with the numerical analysis results. The simulated results are good agreement with the experimental results less 5$%$ error.

• International Journal of Ocean System Engineering
• /
• 제1권3호
• /
• pp.136-143
• /
• 2011

In this paper, three-dimensional free-surface flows are simulated by using two different numerical methods, the constrained interpolation profile (CIP)-based and finite volume (FV)-based methods. In the CIP-based method, the governing equations are solved on stationary staggered Cartesian grids by a finite difference method, and an immersed boundary technique is applied to deal with wave-body interactions. In the FV-based method, the governing equations are solved by applying collocated finite volume discretization, and body-fitted meshes are used. A free-surface boundary is considered as the interface of the multi-phase flow with air and water, and a volumeof-fluid (VOF) approach is applied to trace the free surface. Among many variations of the VOF-type method, the tangent of hyperbola for interface capturing (THINC) and the compressive interface capturing scheme for arbitrary meshes (CICSAM) techniques are used in the CIP-based method and FV-based method, respectively. Numerical simulations have been carried out for dam-breaking and wave-body interaction problems. The computational results of the two methods are compared with experimental data and their differences are observed.

• 한국기계가공학회지
• /
• 제10권6호
• /
• pp.146-151
• /
• 2011

Wax spin coating is a part of several wafer handling processes in the silicon wafer polishing station. It is important to ensure the wax layer free of contamination to achieve the high degree of planarization on wafers after wafer polishing. Three-dimensional air flow characteristics in a wax spin coater are numerically investigated using computational fluid dynamics techniques. When the bottom of the wax spin coater is closed, there exists a significant recirculation zone over the rotating ceramic block. This recirculation zone can be the source of wax layer contamination at any rotational speed and should be avoided to maintain high wafer polishing quality. Thus, four air suction ducts are installed at the bottom of the wax spin coater in order to control the air flow pattern over the ceramic block. Present computational results show that the air suction from the bottom is quite an effective method to remove or minimize the recirculation zone over the ceramic block and the wax coating layer.

• Korean Chemical Engineering Research
• /
• 제57권4호
• /
• pp.475-483
• /
• 2019

화학적 무기 중 혈액작용제는 전자전달계 내 효소의 철 이온과 반응하고 세포호흡을 정지시켜 사망을 초래한다. 혈액작용제는 활성탄의 미세공보다 분자크기가 작아 화학적 흡착이 유일한 제독방법이다. 본 연구는 SG 생활안전에서 개발한 SG-1 가스 여과기를 이용하여 혈액작용제 시아노겐 클로라이드(CK) 가스의 유입에 따른 유동해석을 수행하였다. 구리, 은, 아연 및 몰리브데늄 이온이 첨착된 ASZM TEDA 활성탄을 적용하여 가스 여과기 제작 시험 규정에 따라 화학적 흡착 모사를 수행하였으며 흡착 Kinetic을 적용하기 위해 선 수행된 흡착 베드에서 CK 가스 흡착 실험 결과를 분석하였다. 화학적 흡착을 통해 발생되는 가스 여과기 내부 압력강하 및 가스 흡착 질량 등 주요 변수의 동적거동을 예측하였다. CFD에서 다공성 물질을 적용할 때 사용하는 Ergun 방정식 대신 Granular와 Packed bed를 사용하여 활성탄 적용 가능 결과를 확인하였으며 시간에 따른 흡착 및 유속에 따른 흡착의 유동 해석에 대한 동적 모사를 수행하였다.

• 대한토목학회논문집
• /
• 제28권6B호
• /
• pp.627-634
• /
• 2008

개수로의 난류흐름을 VOF(Volume of Fluid)기법을 채용한 RANS(Reynolds averaged Navier-Stokes) 방정식 모형을 사용하여 수치모의할 때 벽면함수의 거칠기를 산정하기 위해 고려해야 하는 점들을 연구하였다. 거친 벽면상의 흐름을 위한 벽면함수의 거칠기 상수(roughness constant)는 관수로 흐름의 실험을 통하여 얻어진 값을 사용한다. 그러나 개수로 흐름에서는 이 거칠기 상수가 Froude 수에 따라 변화하므로 이를 고려할 수 있어야 하며, 개수로에서 광범위하게 사용되는 Manning 조도계수에 상응하는 벽면 거칠기 높이(roughness height)를 산정하여 사용할 수 있어야 있다. 본 연구에서는 모형에 입력되는 벽면함수의 거칠기 높이와 Manning 조도계수 사이의 관계를 분석하였다. 이를 바탕으로 수치모형의 특성이 고려되고 Manning 조도계수의 함수로 표현되는 유효 거칠기 높이 산정식을 제안하였다.

• 한국해안·해양공학회논문집
• /
• 제20권6호
• /
• pp.532-539
• /
• 2008

권 등(2008)은 수면보다 높은 사각기둥 저항체를 등간격으로 배치하고 항력계수가 일정한 값을 갖는 흐름조건$(Re>10^4)$에서 수리실험을 수행하여 바닥마찰과 형상저항에 의한 흐름저항을 나타내는 상당저항계수로서의 Manning계수 값을 산정하였다. 그리고 힘의 평형방정식으로부터 유도된 이론식에 실험결과를 사용하여 얻어진 경험적 항력상호작용계수를 도입하여 얻은 상당저항계수 식을 제안하였다. 본 연구에서는 이 수리실험을 3차원 전산유체해석 프로그램인 FLOW-3D를 사용하여 수치모의하고 그 결과를 실험결과 및 상당저항계수 식과 비교하여, 그값들이 매우 잘 일치하는 것을 보였다. 이로부터 이론식에 나타나 있는 것처럼 수면보다 높은 저항체가 존재할때 Manning계수가 수심의 2/3승으로 증가한다는 것과 항력상호작용계수가 이격거리의 지배적 영향을 받고 있음을 확인할 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.800-807
• /
• 2010

In this study, a series of numerical analyses has been performed in order to evaluate the performance of a full-scale closed-loop vertical ground heat exchanger constructed in Wonju. The circulation pipe HDPE, borehole and surrounding ground were modeled using FLUENT, a finite-volume method (FVM) program, for analyzing the heat transfer process of the system. Two user-defined functions (UDFs) accounting for the difference in the temperatures of the circulating inflow and outflow water and the change of the surrounding ground temperature with depth were adopted in the FLUENT model. The thermal properties of materials estimated in laboratory were used in the numerical analyses to compare the thermal efficiency of the cement grout with that of the bentonite grout used in the construction. The results of the simulation provide a verification of the in situ thermal response test data. The numerical model with the ground thermal conductivity of 4W/mK yielded the simulation result closer to the in-situ thermal response test than with the ground thermal conductivity of 3W/mK. From the results of the numerical analyses, the effective thermal conductivities of the cement and bentonite grouts were obtained to be 3.32W/mK and 2.99 W/mK, respectively.

• 한국진공학회지
• /
• 제22권2호
• /
• pp.66-78
• /
• 2013

80 kW RF 플라즈마 토치 시스템을 개발하기 위하여, 토치 시스템에 대한 온도, 유체 거동 분석 등의 보다 많은 정보의 추출을 위하여 3차원 시뮬레이션을 진행했다. 파우더 주입관 위치, 입력 전류 변화에 따른 플라즈마 생성 특성, 세라믹 원통관 길이에 따른 플라즈마 방전 특성, 및 공정가스 유량에 따른 플라즈마 온도특성 등을 시뮬레이션 했다. 시뮬레이션을 통해 설계 제작된 RF 열 플라즈마 토치의 경우, 최대 89.3 kW까지 파워 인가가 측정되었다. 개발된 80 kW급 RF 열 플라즈마 토치 시스템의 양산성 평가로 Si 나노분말을 제조하고 특성을 고찰하였다. Si 나노분말의 생산량이 평균 539 g/hr의 양산 수준과 71.6%의 높은 수율을 달성했으며, 제조된 나노 분말은 $D_{99}/D_{50}$가 1.98의 좋은 입경 균일 분포도를 나타내었다.