• Animal Bioscience
• /
• v.35 no.11
• /
• pp.1733-1743
• /
• 2022

Objective: This study was aimed to explore the efficacy of combination of endo-xylanase (Xyn) and xylan-debranching enzymes (arabinofuranosidase, Afd and feruloyl esterase, FE) in improving utilization of bran in piglet diet. Methods: In vitro experiments were firstly conducted to examine the enzymological properties of Xyn, Afd, and FE, concurrent with their effect on degradation of arabinoxylan (Abx) in bran. In vivo experiment was then implemented by allocating two hundred and seventy 35-d-old postweaning piglets into 3 groups (6 replicates/group), which received bran-containing diet supplemented with Xyn (1,600 U/kg) or its combination with Afd (0.8 U/kg) and FE (4 U/kg) or without enzyme. Results: Both Xyn, Afd, and FE are relatively stable against the changes in temperature and pH value. Combining Xyn with Afd and FE had a superiority (p<0.05) over Xyn alone and its combination with Afd or FE in promoting (p<0.05) degradation of Abx in different brans. Combined treatment with Xyn, Afd, and FE was more beneficial than Xyn alone to induce increasing trends (p<0.10) of average daily gain, final body weight and feed efficiency of piglets fed bran-containing diet. Moreover, combination of Xyn, Afd, and FE showed advantages (p<0.05) over Xyn alone in causing reductions (p<0.05) in diarrhea rate and cecal pH value, concurrent with increases (p<0.05) in cecal and colonic acetic acid and total volatile fatty acid concentrations, as well as cecal butyric acid concentration of piglets fed bran-containing diet. Conclusion: Combining Xyn with Afd and FE was more beneficial than Xyn alone in promoting degradation of Abx in bran, along with growth performance and intestinal volatile fatty acid profile of piglets received bran-containing diet. Thereby, combination of Xyn, Afd, and FE had a superior efficacy relative to Xyn alone in improving application of cereal bran in piglet diet.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.03a
• /
• pp.121-124
• /
• 1997

In the present study, a general tool surface contac search ad check algorithm is proposed. A general tool surface is described by triangular FE mesh. To check a proposed algorithm, clover cup and L-shape cup deep drawing processes are calculated. The elastic-plastic FEM using SEAM (Shear Energy Augmented Membrane) element is adapted for numerical stability.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2012.11a
• /
• pp.166-167
• /
• 2012

• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.119.1-119.1
• /
• 2008

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.184-197
• /
• 2008

This study was to investigate the influence of combining composite resins with different elastic modulus, and occlusal loading condition on the stress distribution of restored notch-shaped non-carious cervical lesion using 3D finite element (FE) analysis. The extracted maxillary second premolar was scanned serially with Micro-CT. The 3D images were processed by 3D-DOCTOR. ANSYS was used to mesh and analyze 3D FE model. A notch-shaped cavity was modeled and filled with hybrid, flowable resin or a combination of both. After restoration, a static load of 500N was applied in a point-load condition at buccal cusp and palatal cusp. The stress data were analyzed using analysis of principal stress. Results showed that combining method such that apex was restored by material with high elastic modulus and the occlusal and cervical cavosurface margin by small amount of material with low elastic modulus was the most profitable method in the view of tensile stress that was considered as the dominant factor jeopardizing the restoration durability and promoting the lesion progression.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.5 no.2
• /
• pp.119-123
• /
• 2005

This paper describes a fuzzy-based system for analyzing the stress intensity factors (SIFs) of three-dimensional (3D) cracks. 3D finite element method(FEM) was used to obtain the SIF for subsurface cracks and surface cracks existing in inhomogeneous materials. A geometry model, i.e. a solid containing one or several 3D cracks is defined. Several distributions of local node density are chosen, and then automatically superposed on one another over the geometry model by using the fuzzy theory. Nodes are generated by the bucketing method, and ten-noded quadratic tetrahedral solid elements are generated by the Delaunay triangulation techniques. The singular elements such that the mid-point nodes near crack front are shifted at the quarter-points, and these are automatically placed along the 3D crack front. The complete FE model is generated, and a stress analysis is performed. The SIFs are calculated using the displacement extrapolation method. The results were compared with those surface cracks in homogeneous materials. Also, this system is applied to analyze cladding effect of surface cracks in inhomogeneous materials.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.563-572
• /
• 2006

In order to propose optimum in-situ treatment for reducing phosphorous release from sediment of stationary lakes, a series of column tests were performed. The sediment used in experiment was very fine clay with a mean grain site $7.7{\phi}$ and high $C_{org}$ contents(2.4%). Phosphorous releases were evaluated in two ways : in lake water(with microbial effect) and in distilled water(without microbial effect). As in-situ capping material, sand and loess were used while Fe-Gypsum and $SiO_2$-Gypsum were used for in-situ chemical treatment. In case of lake water considering the effect of microorganism, phosphorous concentration rapidly decreased in the early stage of experiment but it was gradually increased after 10 days. Flux of phosphorous release for control was $3.0mg/m^2{\cdot}d$. Whereas, those for sand layer capping(5 cm) and loess layer capping(5 cm) were $2.5mg/m^2{\cdot}d\;and\;1.8mg/m^2{\cdot}d$, respectively because the latter two were not consolidated sufficiently. For Fe-gypsum and $SiO_2$-gypsum the fluxes were $1.4mg/m^2{\cdot}d$ which meant that reduction efficiency of phosphorous release was more than 40% higher than that of control. The case capping with complex layer was $1.0mg/m^2{\cdot}d$, which showed high reduction efficiency over 60%. The addition of gypsum($CaSO_4{\cdot}2H_2O$) into the sediment reduced release of Phosphorus from the sediments. Gypsum acted as a slow-releasing source of sulphate in sediment, which enhanced the activity of SRB(sulfate reducing bacteria) and improved the overall mineralization rate of organic matter.

• Korean Journal of Soil Science and Fertilizer
• /
• v.10 no.4
• /
• pp.211-217
• /
• 1978

Laboratory experiment was conducted to investigate the changes in the amount of inorganic phosphorus forms in soils incubated by preaddition of two kinds of phosphorus fertilizer and to various methods of available soil P. The results are summarized as following. 1. The content of Al-P form was higher in cultivated upland soil than in noncultivated soil and that of Fe-P was higher in clayey soil than in sandy soil. 2. The amount of Al-P was increased greatly by addition of Triple superphosphate and Al-P and Ca-P were increased by addition of Fused phosphate but only a little amount of Fe-P was increased by both two fertilizers. 3. The magnitute of available soil P values of different methods was in order of Bray No. 2-P>Lancaster-P${\fallingdotseq}$Bray No. 1-P>Truog-P>Olsen-P in case of addition of Triple superphosphate, while it was Lancaster-P >Bray No. 2-P>Truog-P>Bray No.1-P>Olsen-P in case of addition of Fused phosphate. 4. Extractability of soil P by variouse extractants for determining avaliable soil p was in order of Al-P>Ca-P>Fe-P but the extractability of Fe-P by Bray No. 1 and Bray No. 2 methods was very slight. 5. Bray No. 1, Bray No. 2 and extractants was more Olsen extractable about Al-P in soil than Ca-P but Lancaster and Truog metho is was more extractable about Ca-P than Al-P.

• Journal of Nutrition and Health
• /
• v.35 no.2
• /
• pp.237-249
• /
• 2002

This study was done to evaluate the nutritional status and the desirable time and period for making dietary records in male high school Taekwondo athletes. Nutrient and flood intake was investigated using dietary record method during usual training (UT, for 29 days) and special training (ST, for 17 days) periods in nine Taekwondo athletes. Nutrient intake by 7-d and 3-d dietary record were compared to the standard nutrient intake, which was computed from dietary record during total period of UT or ST. Total mean energy intake was 2278 kcal, 84% of RDA, and mean intakes of riboflavin, Ca and Fe were less than 77% of RDA. Mean intakes of energy, carbohydrate, protein, fat, cholesterol, thiamin, riboflavin, and P decreased during ST (p < 0.05 or p < 0.01). Mean intakes of vegetables and grains ware the highest in the two periods and following were beverages and instant floods in UT, and meats and fruits in ST. During ST, mean intakes of mushrooms, meats and their products, and instant floods decreased, and sugars and sweets increased (p < 0.05 or p < 0.01). The contribution of grains and their products, instant floods, and meats and their products to mean intakes of energy, carbohydrate, protein and fat were high. In snacks, the contribution of instant floods, breads and confections and beverages was high. During UT, cholesterol intake at weeks 1 and 3, and intakes of protein, fat, thiamin, riboflavin and niacin at week 4 by 7-d dietary record were different from their standard intakes (p < 0.05 or p < 0.01). Intakes of VA, Ca and Fe at week 1, and intakes of carbohydrates, cholesterol rind crude fiber at week 4 by 3-d dietary record were different from their standard intakes (p < 0.05 or p < 0.01). During ST, VC intake at week 5, and energy intake from carbohydrate and cholesterol intake at week 6 by 7-d dietary record were different from their standard intakes (p < 0.05 or p < 0.01). Cholesterol intake at week 7, and energy intake from carbohydrates and fat, and intakes of protein, fat, cholesterol and riboflavin by 3-d dietary record were different from their standard intakes (p < 0.05 o. p < 0.01). In conclusion, empty-calorie floods can be a main source of diet and snacks for Taekwondo athletes, and education about desirable nutrients and floods intakes is needed to help them control their weight. When investigating the nutritional status of Taekwondo athletes in the future, the 7-day or 3-day dietary record is desirable provided they are conducted in the milddle of each period artier distinguishing UT from ST period.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.186-188
• /
• 1994

Fundamental characteristics of Giant Magnetostrictive Alloy Terfenol-D$(Tb_{0.3}Dy_{0.7}Fe_{1.9\sim1.95})$ were measured by experiments. Magnetostrictions of Terfenol-D samples whose lengths are 15 and 25 mm have been measured under compressive stress from 0 to 14 MPa, when the applied magnetic field was up to 1200 Oe. The relationship between magnetostriction and field is shown graphically in the form of $H-{\lambda}$, curve. For the experiment, solenoid magnet and lever-arm-type stress equipment were designed and fabricated. The magnetostriction is measured by laser displacement measuring system and the stress applied to the sample is measured by load cell.