• 복식
• /
• 제55권4호
• /
• pp.95-106
• /
• 2005

The purpose of this study was to research the design methods to express jacquard design using CAD. For this study, two design patterns were divided; in addition, each design pattern is applied to two different weaving types, single woven fabric and double well cloths. As a result, 16 samples were produced by applying 4 design methods (warp shrunk as half size design/weft shrunk as half size design - A, warp shrunk as half size design/weft original size design - B, warp original size design/weft shrunk as half size design - C, warp original size design/weft original size design - D) to the two design patterns with the two weaving types. The result of this study can be summarized as follows. 1. The most delicate design method was Method D. However, Method B which took half the time less than Method D was almost as delicate as the Method D on the surface. 2. Method B was judged as a considerably efficient method for time and cost. 3. Method D was considered as most suitable for elaborate parts and delicate lines. However, it was considered uneconomical since it took the longest time. 4. Mettled A took 2.5 times less time than Method D. Therefore, Method A was more applicable to producing high density design. 5. Method C is not considered as a useful method as it showed rough surface and took long time by applying high design zoom except intentional design.

• 대한치과보철학회지
• /
• 제60권2호
• /
• pp.222-230
• /
• 2022

디지털 기술은 점차 그 영역을 넓혀 치의학의 여러 분야에 큰 영향을 미치고 있다. 최근 디지털 치의학에서는 다양한 삼차원적(3D) 이미지 데이터를 하나로 중첩시켜 진단 및 보철물 제작에 활용하는 것의 중요성이 대두되고 있다. 안면 스캔, 구내 스캔, 하악 운동 기록(mandibular movement recording) 등의 데이터를 통합하면 가상 환자 모델을 구성할 수 있다. 가상 환자(Virtual patient)란 구내 및 구외 연조직, 잔존 치열, 동적 교합 등 디지털 3D 진단 데이터를 통합하여 형성되며 이를 통해 보철 치료의 결과 등을 가상으로 시뮬레이션을 시행할 수 있다. 본 증례에서의 환자는 37세 여성 및 55세 여성 환자로 각각 기존 보철물의 외형이 틀어진 것 같다는 주소와 근관치료 후 전치부 보철물의 재제작을 주소로 내원하였다. 각 환자에서 3D 안면 스캔을 채득하였으며, ARCUS Digma 2 (KaVo Dental GmbH, Biberach an der Riss, Germany)를 통해 환자의 하악 운동을 기록하였다. 수집한 데이터를 computer-aided design (CAD) 소프트웨어(Exocad dental CAD; exocad GmbH, Darmstadt, Germany) 상에서 하나로 통합하여 가상 교합기에 옮겨 디지털 가상 환자를 형성하였다. 이를 통해 임시 고정성 보철물을 디자인하고 수복하여 평가하였으며, 최종수복물로 옮겨 심미적, 기능적으로 만족할 만한 결과를 보였기에 이를 보고하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2514-2518
• /
• 2003

The KAERI Spent Fuel Remote Technology Development (SFRTD) Department is developing the remote maintenance and repair equipment, which is used in a hot cell in an intense radiation field, as part of a project to develop the Advanced spent fuel Conditioning Process (ACP). Although several mechanical master-slave manipulators (MSMs) is mounted on the hot cell wall, their reach will be limited and cannot access areas for all the ACP equipment maintenance. A Bridge Transported ServoManipulator (BTSM) has been designed to overcome the limitation of access areas that is a drawback of MSMs for the ACP equipment maintenance. The BTSM system consists of four components: a transporter with telescoping tubeset, a slave manipulator, a master manipulator, and a remote control system. The BTSM system has been designed by Solid Edge that is a 3D computer-aided design (CAD) software, except for the remote control system. The master manipulator and the slave manipulator are kinematically similar in design, except for the handle and the tong, respectively. The manipulators have 6 degrees of freedom (DOF) plus the jaws motion. The transporter has traveling, traverse, and hoisting motion to position the slave manipulator.

• 한국정밀공학회지
• /
• 제17권6호
• /
• pp.176-184
• /
• 2000

Reverse engineering (RE) is a process to create computer aided design (CAD) models from the scanned data of an existing part acquired using 3D position scanners. This paper proposes a novel methodology of extracting geometric features directly from a set of 3D scanned points, which utilizes the concepts of feature-based technology and artificial neural networks (ANNs). The use of ANN has enabled the development of a flexible feature-based RE application that can be trained to deal with various features. The following four main tasks were mainly investigated and implemented: (1) Data reduction; (2) edge detection; (3) ANN-based feature recognition; (4) feature extraction. This approach was validated with a variety of real industrial components. The test results show that the developed feature-based RE application proved to be suitable for reconstructing prismatic features such as block, pocket, step, slot, hole, and boss, which are very common and crucial in mechanical engineering products.

• 한국멀티미디어학회논문지
• /
• 제14권6호
• /
• pp.813-823
• /
• 2011

본 연구는 한국멀티미디어학회 2010년 7월 멀티미디어학회 논문지 제 13권 7호에 발표된 기존 3차원 캐릭터 모델기반 CGS System 의 Digital 개발 프로세스 중 얼굴 애니메이션 발상단계로써 3D 캐릭터 디자이너가 애니메이션 제작단계에서 아이디어를 창출하고 이를 활용하는 과정에서 반복되어지는 과정을 보다 효과적으로 활용할 수 있는 프로세스를 제안한다. 본 연구를 위해서 캐릭터의 해부학적인 구조로써 감정변화에 따른 3D 캐릭터의 표정연출에 관한 선행 연구 및 극장용 애니메이션 캐릭터 표정 사례연구 통하여 최종 CGS System의 Facial Animation 에 유용한 시스템을 제안하였다.

• 한국안전학회지
• /
• 제22권1호
• /
• pp.30-35
• /
• 2007

With the rapid industrialization and civilization development, noise has become a major problem in cities and is a very serious issue for the environment. Noise induced in a factory has a bad influenced on operation efficiency, accuracy and detail of work. The purpose of this paper is to develop a new noise evaluation software for predicting acoustic condition including noise properties during the design of a factory. Majority of commercial softwares for this purpose have been developed in foreign countries and they are quite expensive and hard to use. A new home-made software tool has been developed in the present work, which aimed at providing a more user-friendly environment. The tool developed in this work consists of four major part; the prediction and evaluation of noise in system design, database design, noise analysis development and 3D graphic modeling. The outcome of present work is expected to provide domestic users with a more user-friendly and economic acoustic design tool.

• The Journal of Advanced Prosthodontics
• /
• 제14권3호
• /
• pp.150-161
• /
• 2022

PURPOSE. The purpose of the study was to assess the influence of build orientations and density of support structures on the trueness of the 3D printed removable partial denture (RPD) frameworks. MATERIALS AND METHODS. A maxillary Kennedy class III and mandibular class I casts were 3D scanned and used to design and produce two 3D virtual models of RPD frameworks. Using digital light processing (DLP) 3D printing, 47 RPD frameworks were fabricated at 3 different build orientations (100, 135 and 150-degree angles) and 2 support structure densities. All frameworks were scanned and 3D compared to the original virtual RPD models by metrology software to check 3D deviations quantitatively and qualitatively. The accuracy data were statistically analyzed using one-way ANOVA for build orientation comparison and independent sample t-test for structure density comparison at (α = .05). Points study analysis targeting RPD components and representative color maps were also studied. RESULTS. The build orientation of 135-degree angle of the maxillary frameworks showed the lowest deviation at the clasp arms of tooth 26 of the 135-degree angle group. The mandibular frameworks with 150-degree angle build orientation showed the least deviation at the rest on tooth 44 and the arm of the I-bar clasp of tooth 45. No significant difference was seen between different support structure densities. CONCLUSION. Build orientation had an influence on the accuracy of the frameworks, especially at a 135-degree angle of maxillary design and 150-degree of mandibular design. The difference in the support's density structure revealed no considerable effect on the accuracy.

• 한국산학기술학회논문지
• /
• 제14권11호
• /
• pp.5330-5333
• /
• 2013

본 논문은 고압세척기의 성능을 향상시킨 제품개발을 위하여 현장에서 사용되는 고압세척기를 분해하여 측정하였으며 실제형상을 3차원 설계프로그램인 CATIA V5를 사용하여 모델링하였다. 또한 모델링된 고압세척기에 대하여 3차원 유한요소해석 프로그램인 ANSYS를 사용하여 유동해석을 수행하여 내부압력에 따른 유체의 흐름을 구하였다. 이러한 결과는 새로운 고압세척기의 제품개발에 활용될 예정이다.

• 한국CDE학회논문집
• /
• 제16권3호
• /
• pp.216-226
• /
• 2011

Surgeon dentists usually rely on their experiential judgments from patients' oral plaster casts and medical images to determine the positional and directional information of implant fixtures and to perform drilling tasks during dental implant surgical operations. This approach, however, may cause some errors and deteriorate the quality of dental implants. Computer-aided methods have been introduced as supportive tools to alleviate the shortcomings of the conventional approach. In this paper, we present an approach of 3D dental implant simulation which can provide the realistic and immersive experience of dental implant information. The dental implant information is primarily composed of several kinds of 3D mesh models obtained as follows. Firstly, we construct 3D mesh models of jawbones, teeth and nerve curves from the patient's dental images using software $Mimics^{TM}$. Secondly, we construct 3D mesh models of gingival regions from the patient's oral impression using a reverse engineering technique. Thirdly, we select suitable types of implant fixtures from fixture database and determine the positions and directions of the fixtures by using the 3D mesh models and the dental images with software $Simplant^{TM}$. Fourthly, from the geometric and/or directional information of the jawbones, the gingival regions, the teeth and the fixtures, we construct the 3D models of surgical guide stents which are crucial to perform the drilling operations with ease and accuracy. In the application phase, the dental implant information is combined with the tangible interface device to accomplish 3D dental implant simulation. The user can see and touch the 3D models related with dental implant surgery. Furthermore, the user can experience drilling paths to make holes where fixtures are implanted. A preliminary user study shows that the presented approach can be used to provide dental students with good educational contents. With future work, we expect that it can be utilized for clinical studies of dental implant surgery.

• 대한치과보철학회지
• /
• 제59권4호
• /
• pp.442-450
• /
• 2021

컴퓨터 지원 설계 및 제조 기법(CAD-CAM)은 치과 영역에서 급속도로 발전해온 분야로, 다양한 보철 치료 영역에 적용되고 있다. 이 중 절삭형 방식(Subtractive Manufacturing)으로 분류되는 절삭가공 기법을 이용한 의치 제작은 상용화된 디지털 총의치 제작 방식 중 하나이며, 동시에 첨가형 방식(Additive Manufacturing)으로 분류되는 레이저 소결 혹은 용융 기법을 활용하여 피개의치를 위한 금속구조물을 보다 효율적으로 제작할 수 있게 되었다. 본 증례에서는, CAD-CAM을 통해 절삭형 방식으로 제작한 상악 총의치와 3D 금속 프린팅을 이용한 금속구조물과 절삭형 방식으로 제작된 인공치를 접목한 하악 임플란트 피개의치를 제작하였다. 이를 통해 기능적, 심미적으로 적절한 임상적 결과를 얻었으므로 이를 보고하는 바이다.