• 복식문화연구
• /
• 제31권5호
• /
• pp.627-639
• /
• 2023

This study seeks to increase the satisfaction of elderly men when purchasing and wearing ready-to-wear clothes by designing a slacks pattern suitable for their body type, which is determined by analyzing their lower bodies using virtual avatars and 3D virtual simulation system. The study found the following. First, based on virtual visualization of the comparison slacks pattern, the waistline position was consistently the lowest scored question among the evaluation survey items. Interpretation of this dissatisfaction suggests that, because the front waistline falls below the abdomen, the lower body, and especially the abdominal shape, is unpleasantly emphasized. Second, by using a virtual simulation system, the study developed a new slacks pattern that considered the concerns of elderly men. The primary measurement changes were as follows: front waist girth W/4+1.5cm+0.5cm, back waist girth W/4+1.5cm-0.5cm, front hip girth H/4+2.5cm-0.5cm, back hip girth H/4+2.5cm+0.5cm. Third, the new slacks pattern's appearance was evaluated more highly than the comparison pattern, confirming the new pattern's appropriateness for elderly men. This study demonstrates how slacks and other clothing patterns designed in a 3D virtual garment simulator can be used to design more appealing clothing for elderly men, increasing the satisfaction of wearing ready-made clothes at older ages.

• 한국의상디자인학회지
• /
• 제17권4호
• /
• pp.55-66
• /
• 2015

The objective of this study is to propose a method by which movement fitness can be evaluated using a three-dimensional virtual garment simulation program. To this end, five types of jean pants for men were evaluated on the program by setting the avatars to make particular movements to examine the level of pressure on each body part. To verify whether the clothing pressure measurement produces valid and reliable results, virtual garment simulation program was utilized. The results indicated that there were significant differences in the levels of pressure on body parts depending on the type of test garment and motion. In addition, the clothing pressure measurement results were in line with the appearance evaluation results suggested by a previous study. Based on this set of results, the nomological validity of the clothing pressure measurement program used in this study was verified. Moreover, we employed an appearance evaluation along with the clothing pressure measurement to verify the reliability of the program; there was a high correlation between clothing pressure measurements and appearance evaluation measurements, indicating that measuring clothing pressures may well compensate for the limitations of appearance evaluation. We expect the results of this study to make valuable contributions in facilitating the digitalization of the fashion industry. Furthermore, this study also is significant in that it has suggested 3D virtual fitting programs as a solution to the long-criticized problem related to the evaluation of movement fitness in existing virtual garment simulation programs.

• 한국의류학회지
• /
• 제45권3호
• /
• pp.439-452
• /
• 2021

The purpose of this thesis is to compare the efficiency of 3D digital design technology with traditional hand-drawn designs of a transformable dress for a small wedding. After reviewing the literature, this empirical study analyzed the tendencies of small wedding dress design, concluding that a transformable dress for a small wedding consists of a bodice, skirt, and outer skirt or gown with train, each of which has five possible designs, resulting in 15 virtual items within the 3D program. The 3D program provides the benefit of easy design development as well as reduced costs and design time. Specifically, the random combination of 15 items with layers in the 3D program produced 150 different styles in 5 hours, while hand-drawing 150 dresses took 50 hours. Moreover, the 3D program does not need any material, but 150 physical drawings required a sketchbook, pencil, eraser, and marker, total cost 31,100 won. Additionally, the 3D whole-body scan helps the bride decide which design she prefers through virtual try-ons. Eventually, the 3D program could help a bride decide what she prefers and produce it with virtual simulation, resulting in reduced time and costs.

• 한국의류산업학회지
• /
• 제12권5호
• /
• pp.582-590
• /
• 2010

Garment design needs an iterative manipulation of 2D patterns to generate a final sloper. Traditionally there have been two kinds of design methodologies such as the flat pattern method and the pattern draping method. But today, it is possible to combine the advantages from the two methods due to the realistic cloth simulation techniques. We devised a new garment design system which starts from 3D initial drape simulation result and then modifies the garment by editing the 2D flat patterns synchronously. With this interactive methodology using real-time pattern deformation technique, the designer can freely change a pattern shape by watching its 3D outlook in real-time. Also the final garment data were given relative coordinates with respect to the human anthropometric feature points detected by an automatic body feature detection algorithm. Using the relative human body coordinate system, the final garments can be re-used to an arbitrary body data without repositioning in the drape simulation. A female shirt was used for an example and a 3D body scan data was used for an illustration of the feature point detection algorithm.

• 한국복식학회:학술대회논문집
• /
• 한국복식학회 2002년도 International Costume Conference
• /
• pp.40-41
• /
• 2002

• 패션비즈니스
• /
• 제18권6호
• /
• pp.38-56
• /
• 2014

This study compared the flared skirts on 3D simulation and in real to show diverse forms in women's clothing depending on the body's gait and motion. By finding the problems, we suggested the possible methods for utilizing the 3D simulation in the clothing industry. First, the 3D simulation of flared skirts showed similar forms of appearance according to the flare length and volume. However, virtually formed drape shape was even in size and spacing, whereas it was not even in real. Second, according to the results of appearance test on the length and flare volume at $90^{\circ}$ and $180^{\circ}$, both real and 3D simulation skirts were evaluated to have outstanding appearances regardless of the skirt length. However, as the flares volume increased, the skirts with longer length were evaluated to have superior appearances compared to the skirts of shorter length. Third, it showed higher resemblance between the real and virtual simulation, when the skirt had less flare and as the skirt length shortened. However, it showed greater difference between the real and virtual simulation when flare volume and length increased. The length and volume of the skirt and the physical properties of the material are predicted to be different between the real and virtual simulation. However, they usually are similar in forms, so it is believed possible to use for predicting the design's silhouette or the feel when it is worn. This method can be applied on internet shopping malls, which can possibly reduce unnecessary time and expenses.

• 한국컴퓨터정보학회논문지
• /
• 제24권2호
• /
• pp.75-84
• /
• 2019

The purpose of this study was to present a good pants pattern for boys aged 13-18 by comparing and analyzing the pants pattern according to lower body shape. And through it, this study was to provide basic data for pants production considering male student body shape. The pattern of this study used the industrial type Lee Hee-chun pattern and DC Suite Program for 3D virtual simulation. As a result of the appearance evaluation, there was a significant difference between the patterns in most items. Type 2 was rated highly, followed by Type 4, Type 3, and Type 1. Type 1 required correction of the length of the pants and the amount of crotch part, while type 3 required adjustment of the pants in the knee area. Type 4 required correction of pattern drawing method of crotch width, thigh circumference, and knee circumference. This pattern method was evaluated as suitable for slender body shape. This study suggests a pants pattern system suitable for adolescent boys by reflecting the body shape characteristics of adolescent boy with a change of body shape. It is expected that this will meet the increasing demand for fitting. In this study, we have examined 3D virtual simulation, not actual wear experiment, so it will be necessary to investigate the difference through actual clothing experiment for adolescent boys.

• 한국의류산업학회지
• /
• 제23권2호
• /
• pp.247-260
• /
• 2021

While it is an important element of clothing construction, research has so far been very limited on the similarities between virtual and real clothing in terms of the type of neckline. The purpose of this study is to verify the similarity, accuracy of virtualization, and actuality of neckline, which all play an important role in individual impressions and image formation, and require considerable modification when fitting real samples. A total of 5 neckline models were selected through the analysis of dress composition textbooks. The selected designs were then planned and manufactured in muslin. The specimen clothes were then tested on a female model in her 20s. 2 kinds of virtual bodies were created in order to compare the real and the virtual dressing. The first virtual body was made through an Artec 3D Eva scan of the model, and the other was made by entering the model's measurements in a CLO 3D program. A visual image of the front, side, and back image of both the real and virtual dressing were subsequently collected. The collected images were then evaluated by 20 professional fashion workers who checked the similarity between the real and the virtual versions. The current study found that the similarity between the actual and virtual wearing of the five neckline designs with reality appeared higher with the virtual wearing image using the 3D-scanned body. The results of this study could provide further information on the selection of appropriate avatars to clothing companies that check the fit of clothing by utilizing 3D virtualized programs.

• 한국염색가공학회지
• /
• 제31권3호
• /
• pp.214-224
• /
• 2019

This investigation reported the simulation technologies to design the 3-dimensional fabrics such as 3 dimensional multi-layered fabric, 3 dimensional braided fabric and spacer fabric. The simulation system or software has been actively used to develop products of 3 dimensional fabric which can be reduced development costs and time. Thus, many countries such as Japan, Germany, China, and U.K. show great interests on simulation technologies for developing new materials and processes including 3 dimensional fabric field. In this study, simulation systems have been reviewed for the 3 dimensional fabric design system from Mikawa Textile Research Center, Japan; ProCad and ProFab from Karl Mayer and Texion, Germany; xComposites from China; TexGen from Nottingham University, U.K.; TexPro from Young Woo CnI, Korea, respectively.

• 문화기술의 융합
• /
• 제7권1호
• /
• pp.75-81
• /
• 2021

첨단 정보통신 기술의 발달에 따라 디지털 문화에 익숙한 Z세대는 미래 패션을 재편할 수 있는 패션 산업의 주요 소비층으로 관심이 집중되고 있다. 본 연구에서는 디지털 기기에 능숙하고 인터넷을 통한 정보 습득 및 모바일 라이프스타일에 친숙한 Z세대를 위한 캐쥬얼웨어를 3D 가상 시뮬레이션에 의해 디자인하여 걸리쉬, 스포티브, 이지, 컨템포러리의 4가지 룩으로 디자인 전개하였다. 의상디자인에 3D 가상 착의 시뮬레이션의 활용은 팬데믹 환경에서 디지털 패션 디자인기획 및 생산 프로세스와의 융합을 통한 미래 패션 산업의 디지털화를 구축하고 온라인 플랫폼의 유통을 강화시킬 수 있다. 언택트 패션 제작 시스템을 도입하여 업무의 효율성 강화를 위한 지속적인 혁신을 시도하고 있는 기업 환경에서 3D 가상의상 기술의 활용은 3D 샘플 제작, 온라인 피팅, 수정과 보정 및 품평을 통해 업무 프로세스에서 소통이 확대되고 인적, 물적 자원의 경감에 따른 긍정적 효과를 통해 지속 가능한 패션의 가치를 확대시킬 수 있다.