• The KIPS Transactions:PartA
• /
• v.18A no.3
• /
• pp.81-92
• /
• 2011

There has been a number of attempts to apply 3D CAD data created in the design stage of product life cycle to various applications of the other stages in related industries. But, 3D CAD data requires a large amount of computing resources for data processing, and it is not suitable for post applications such as distributed collaboration, marketing tool, or Interactive Electronic Technical Manual because of the design information security problem and the license cost. Therefore, various lightweight visualization formats and application systems have been suggested to overcome these problems. However, most of these lightweight formats are dependent on the companies or organizations which suggested them and cannot be shared with each other. In addition, product structure information is not represented along with the product geometric information. In this paper, we define a dataset called prod-X3D(Enhanced X3D Dataset for Web-based Visualization of 3D CAD Product Model) based on the international standard graphic format, X3D, which can represent the structure information as well as the geometry information of a product, and propose a translation method from 3D CAD data to an prod-X3D.

• Journal of Aerospace System Engineering
• /
• v.12 no.4
• /
• pp.57-63
• /
• 2018

IR thermography is a non-invasive method and used for the visualization of the surface temperature of the model. However, this technique only derives 2D results and not quantitative data. The goal of this study is to apply the 3D mapping technique for IR thermography. The wind tunnel model is an ogive-cylinder with a wind speed of 20 m/s ~ 80 m/s and the angle of attack ranging from $0^{\circ}$ to $90^{\circ}$. The real location of the model was made to correspond with the position of the IR image using the makers. Based on this result, quantitative results were obtained. The 3D mapping method was verified by comparing the separation point and the theoretical value.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.673-675
• /
• 2005

본 논문은 3차원 텍스쳐 기반의 볼륨 가시화를 위한 GPU 대역폭에 효과적인 렌더링 기법을 제안한다. 전처리 과정에서 옥트리를 이용하여 원본 볼륨 데이터를 계층적으로 균일한 크기로 분할하여 실제 영역만을 효과적으로 검출하게 되고, 렌더링 시에는 가시순서에 따라 옥트리를 탐색하며 리프 노드의 각 부볼륨을 텍스쳐 매핑 유닛에서 처리하고 블렌딩 유닛에서 이를 합성한다. 작은 크기($16^3$ 또는 $32^3$)의 부볼륨 처리는 텍스쳐와 픽셀 캐시의 이용율을 높이고 공백 공간 생략을 가용하게 하여 GPU의 메모리 대역폭을 크게 줄여 렌더링을 가속할 수 있다. 제안하는 기법의 캐시 효율, 메모리 트래픽, 렌더링 시간 등 다양한 실험 결과와 성능분석이 제공된다. 실험 결과는 제안하는 기 법이 전통적인 렌더링 방법에 비해 평균 11배의 대역폭 감소와 3배 빠른 렌더링을 가능하게 하여 GPU를 이용한 볼륨 렌더링에 효과적인 방법임을 보여주었다.

• 한국가시화정보학회:학술대회논문집
• /
• 2004.12a
• /
• pp.91-110
• /
• 2004

A comprehensive three-dimensional nano-particle tracking technique in micro- and nano-scale spatial resolution using the Total Internal Reflection Fluorescence Microscope (TIRFM) is discussed. Evanescent waves from the total internal reflection of a 488nm argon-ion laser are used to measure the hindered Brownian diffusion within few hundred nanometers of a glass-water interface. 200-nm fluorescence-coated polystyrene spheres are used as tracers to achieve three-dimensional tracking within the near-wall penetration depth. A novel ratiometric imaging technique coupled with a neural network model is used to tag and track the tracer particles. This technique allows for the determination of the relative depth wise locations of the particles. This analysis, to our knowledge is the first such three-dimensional ratiometric nano-particle tracking velocimetry technique to be applied for measuring Brownian diffusion close to the wall.

• Journal of computational fluids engineering
• /
• v.11 no.2 s.33
• /
• pp.56-61
• /
• 2006

As the size and dimension of target problems in the field of computational engineering including CFD gets bigger and higher, it is needed to have more efficient and flexible data visualization environment in terms of software and hardware. Even though it is still manageable to use a mouse in controlling 3-dimensional data visualization, it would be beneficial to use 3-D input device for 3-D visualization. 'Data Glove' is one of the best 3-D input devices, because human hands are best tools for understanding 3-D space and manipulating 3-D objects. Signals coming from 'Data Glove' are analog and very sensitive to finger motions, therefore signal filtering using a digital filter is applied. This paper describes our experience and benefits of using data gloves in controlling 3-dimensional postprocessing softwares.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.948-958
• /
• 2010

Human body signals collected by the MRI system are very weak, such that they may be easily affected by either external noise or system instability while being imaged. Therefore, this paper analyzes the nonuniformity caused by a design of the RF receiving coil in a low-magnetic-field MRI system, and proposes an efficient method to improve the image uniformity. In this paper, a method for acquiring 3D bias volume data by using phantom data among various methods for correcting such nonuniformity in MRI image is proposed, such that it is possible to correct various-sized images. It is shown by simulations that images obtained by various imaging methods can be effectively corrected using single bias data.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.7
• /
• pp.35-42
• /
• 2016

There are many reclamation projects domestically and internationally which requires large quantity of reclaimable materials. To provide enough reclaimable soils which are limited in land, there have been various research focusing on the dredged soils in the marine environments. As a part of this research, a GIS based 3D dredging reclamation visualization program was developed for the volume estimation of dredged soils in 2015. The developed program is based on the digitized spatial information of the site investigation data with a consideration of the reliability of the data. Prior to the validation with the comparisons with the actual dredged volume measurement data, the developed program was compared with the commercial 3D visualization program with 3D visualized results from the test site near the Gunjang harbor. The validation of the developed program was performed in terms of the degree of visualized precision, the sectional and profiling of soil layers and the dredged volume estimation results. Based on the comparisons, both commercial and developed program show similar dredged volume with minor discrepancies in soil layers.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.2
• /
• pp.264-270
• /
• 2011

The Characteristics of the flowfield around three circular cylinders in tandem arrangement was investigated by PIV. Strouhal numbers, vorticity, velocity vectors and velocity profiles were observed at centre-to-centre space ratios of P/D=1.25~3.75, and Reynolds number of Re=$3.0{\times}10^3{\sim}5.0{\times}10^3$. As the results the Strouhal numbers measured in the rear region of 3rd the cylinder were distinguished three kind of regions with the space ratios and The flow pattern in the wake of each cylinder was different according to these regions. The time averaged flow at region of each cylinder was almost stagnated and the size of the stagnated region was small in order of 1st, 2nd and 3rd cylinder. The direction of vortex at the front and rear region of 2nd cylinder was opposed each other with the small difference(${\alpha}= {\pm}5^{\circ}$) of the attack angle ${\alpha}$.

• The Journal of the Korea Contents Association
• /
• v.11 no.7
• /
• pp.30-37
• /
• 2011

In this paper we implemented 3D contents based work process simulation for 3D view contents. For this the method of 3D view technique is explained. The automobiles and PC assembly processes according to the virtual scenario showed the technique which assists workers through 3D view. Also for 3D information visualization, max script of contents modeling functions using 3D MAX was developed. The functions are designed to customize coordinate, material edit on modeling, rendering, and 3D object files with max script.

• Solar Energy
• /
• v.17 no.3
• /
• pp.35-41
• /
• 1997

An experimental study was carried out in a vertical channel with square heat source by visualization equipment with laser apparatus. The image processing system consists of one commercial image board slit into a personal computer and 2-dimensional sheet light by Argon-Ion Laser with cylindrical lens and flow picture recording system. Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system which adopted two-frame grey-level cross correlation algorithm. Heat source was uniform heat flux(5W). The obtained results show various flow patterns such as the kinetic energy distribution and the turbulent kinetic energy distribution.