• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.124-124
• /
• 2023

본 연구에서는 태풍의 이동속도(TS), 상륙각도(LA) 및 연안 지형이 최대 해일고(MSH)에 미치는 복합적인 효과를 분석하기 위해, 이상적인 시나리오와 실제 규모의 사상에 대한 수치모의를 수행였으며. 이를 통해 태풍 진행시 연안을 따라 분포하는 최대 해일고의 일반적 특성을 도출하고자 한다. Delft3D-FM의 2차원 모델을 사용하여 수치모의를 진행하였으며, 모델 도메인은 태풍의 상륙 지점을 연안 중심에 위치시켜고 16km에서 1km까지 다중 해상도 격자로 구성하였다. 가상의 태풍은 다양한 TS와 LA 조건에 따라 생성되었고, TS는 기존의 태풍 사상들의 특성을 통계적으로 분석하여 유의한 범위에서 변화하도록 설정하는 반면, LA의 경우 0도에서 180도까지 15도 간격으로 변화시켰다. 또한, 연안형상과 해저 지형도 다양한 형태를 고려하였는데 해저 지형의 경우일정수심 혹은 여러 가지 대륙붕 폭을 지닌 지형, 다중 경사 지형 등이 고려되었다. 연안형상의 경우 형태 비율로 특징 지어지는 개방 연안과 만이 고려되었다. 총 763개의 이상적인 시나리오가 모의되었으며 그 결과 연안을 따라 MSH 분포를 분석하였다. 이상적인 시나리오에서 개발된 효과의 적용성을 검증하기 위해 다양한 TS와 LA 조건에서 역사적인 태풍 매미를 기반으로 현실적인 규모의 시나리오 모의가 실시되었다. 그 결과 빠르게 이동하는 TS가 개방 연안을 따라 분포하는MSH를 증폭시킨다는 사실을 재확인하는 등, 연안지형, 태풍의 특성에 따른 최대 푹풍해이고 변화에 대한 다양한 결과를 얻을 수 있었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.406-409
• /
• 2022

In recent years, the developments in technologies, such as AI systems, Blockchain, VR/AR, 3D printing, robotics, and nanotechnology, are reshaping the future of healthcare right before our eyes. And also, healthcare has seen a paradigm shift towards prevention-oriented medicine, with a focus on consumers requirements. The spread of infectious diseases such as Covid-19 have altered the definition of healthcare and treatment facilities, necessitating immediate action to redesign hospitals' physical environments, adapt communication models to address social distancing requirements, implement virtual health solutions, and establish new clinical protocols. Hospitals, which have traditionally served as the hub of healthcare systems, are pursuing or being forced to reestablish themselves against this landscape. Rather than only treating ailments, future healthcare is predicted to focus on wellness and prevention. In personalized care, long-term prevention strategies, remote monitoring, early diagnosis, and detection are critical. Given the growing interest in smart healthcare defined by these modern technologies, this study looked into the definitions and service kinds of smart healthcare. The background and technical aspects of smart hospitals were also explored through a literature review.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.6
• /
• pp.591-598
• /
• 2008

Recently, the government has improvement projects of dangerous road for the site that has very high accident rate due to bad geometric structures of the road. Although, route selecting of the road is a basic and important process, but the process of route selecting must consider the technical, safety and environment factor together. Also, the technology for the 3-dimensional terrain model can be used as an important factor in planning and designing for selecting alternative route projects. In the course of experimenting with the 3-dimensional topography generated by the combination of the digital map and drawing of route, the technology as been developed to offer the multi-dimensional access to the potential construction sites from the nearby main roads. This 3-dimensional digital elevation model has made it possible to make various terrain analysis base on GIS, which provides real-time virtual access to the designated construction sites for development planning and construction projects. Therefore, this study presents a reasonable plan for route selecting from some alternative routes through subjective evaluation and classify the methods linked basic design of road construction.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.4
• /
• pp.300-307
• /
• 2009

The transport of landfill leachate in the subsurface formations of unlined landfill sites is considered. The impacts of hydrogeological and chemical heterogeneities on the leachate transport are assessed by examining the results from a series of Monte-Carlo simulations. The landfill system simulated in this study is hypothetically represented with three levels of spatial variability for the hydrogeological and chemical parameter; (1) homogeneous hydraulic conductivity (K) and distribution coefficient ($K_d$), (2) K heterogeneity only, and (3) combined heterogeneities of K and $K_d$. To calculate the transport of leachate through negatively-correlated random hypothetical K-$K_d$ fields generated using geostatistical input parameters, a saturated flow model is linked with a contaminant transport model. Point statistic values such as mean, standard deviation, and coefficient of variation of the concentration were obtained from 100 Monte-Carlo trials. Results of point statistics show that the heterogeneities of K and $K_d$ in the landfill site prove to be an important parameter in controlling leachate concentrations. Consideration of combined K and $K_d$ heterogeneities results in enhancing the variability of contaminant transport. The variability in the leachate concentration for different realizations also increases as the distance between source and monitoring well increase.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.1
• /
• pp.1-8
• /
• 2005

Image morphing to generate 2D transitions between images may be difficult even to express simple 3D transformations. In addition, previous view morphing method requires control points for postwarping, and is much affected by self- occlusion. This paper presents a new morphing algorithm that can generate automatically in-between scenes from un-calibrated images. Our algorithm rectifies input images based on the fundamental matrix, which is followed by linear interpolation with bilinear disparity map. In final, we generate in-between views by inverse mapping of homography between the rectified images. The proposed method nay be applied to photographs and drawings, because neither knowledge of 3D shape nor camera calibration, which is complex process generally, is required. The generated in-between views can be used in various application areas such as simulation system of virtual environment and image communication.

• Korean Journal of Remote Sensing
• /
• v.22 no.6
• /
• pp.621-626
• /
• 2006

Today's commercial high resolution satellite imagery such as IKONOS and QuickBird, offers the potential to extract useful spatial information for geographical database construction and GIS applications. Extraction of 3D building information from high resolution satellite imagery is one of the most active research topics. There have been many previous works to extract 3D information based on stereo analysis, including sensor modelling. Practically, it is not easy to obtain stereo high resolution satellite images. On single image performance, most studies applied the roof-bottom points or shadow length extracted manually to sensor models with DEM. It is not suitable to apply these algorithms for dense buildings. We aim to extract 3D building information from a single satellite image in a simple and practical way. To measure as many buildings as possible, in this paper, we suggested a new way to extract building height by triangular vector structure that consists of a building bottom point, its corresponding roof point and a shadow end point. The proposed method could increase the number of measurable building, and decrease the digitizing error and the computation efficiency.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.170-170
• /
• 2017

기후변화 따른 스마트팜 돈사 외부 환경의 변화에 대응하고, 사육 환경을 능동적으로 개선하기 위한 연구가 수행 중이다. 돈사 내 열전달 요소 간 상호 역학성 분석을 위해서 고려해야할 사항은 입기구, 보온 등, 열풍기, 단열제, 위치, 방향, 돈사의 연평균 온도, 습도, 연중 일사량, 가축의 열복사 등 상호 복잡하게 연관되어 있는 물리량이다. 돈사 전체 열손실, 자연발생 에너지량, 강제발생 에너지량, 난방용량 등을 고려한 순간 열부하 산정을 위한 여러 방법 중 우선적으로 CFD(Computational Fluid Dynamics)를 이용하였다. 순간 열부하 산정을 위한 해석 도구 선정에 있어서 다양한 유체 및 기체 전산 유체역학 Solver(Fluent, Open-FOAM, Blender)를 고려하였다. 공간 Mech를 수행하기 위한 도구로는 공개 소프트웨어 인 FreeFem++ 3.51-4 (http://www.freefem.org)를 이용하였다. 이 과정에서 일부 기체 (암모니아)의 농도를 난수로 변화시키는 기법을 적용하여 가상적으로 돈사의 환경을 Pseudo 시뮬레이션 하였다. 결과적으로 Fluent에 비하여 OpenFOAM을 이용하여 얻은 열유동의 방향(속도)과 크기 백터가 상대적으로 크게 나타났다. Fluent가 시계열 상에서 혼합 기체 물리량 변화를 무시할 수 있는 안정되고 균일한 환경에 적합하기 때문인 것으로 판단되었다. Blender의 경우 Lattice Boltzmann methods 과 Smoothed-particle hydrodynamics 방법을 이용한 유체/입자 동력학 모델링을 제공함에 있어 시각적 효과를 강조하는 기능에 중점을 두었다. Fluent와 Blender에서 제공하는 해석 연산 모듈의 정확성 검증을 위해선 공간 분해능을 높인 정밀 계측 시스템을 이용하여 검증할 필요가 있다. Open-FOAM를 이용한 열부하 분석 수행이 상대적으로 높은 절대값을 보이는 특성은 열부하 제어 시스템의 Overshoot를 유발할 가능성이 있으므로 이에 대한 해석 모델의 보정이 추가적으로 필요할 것이다. CFD의 한계인 시간 복잡도를 낮추고 상대적으로 높은 시계열 분해능을 확보할 경우 돈사 내 환기시스템에 맞는 소요 환기량 실시간 산정이 가능해지고 외부기상 및 돈사내부 복사열을 활용함과 동시에 돈군 순환에 상응하는 실시간 열부하 관리 시스템 도출이 가능할 것이다.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.5
• /
• pp.15-26
• /
• 2010

This paper presents the results of a three-dimensional finite element analysis on a geosynthetic-reinforced bridge abutment. Examples on the use of mechanically stabilized earth bridge abutment in north America are first presented. A three-dimensional finite element analysis on a 4.8 m high, 14 m wide geosynthetic-reinforced bridge abutment was performed to investigate the 3D behavior of the geosynthetic-reinforced bridge abutment and the load carrying capacity of the bridge abutment in the three-dimensional space. The results are then presented in a way that the three-dimensional behavior of the abutment can be identified in terms of wall displacements and reinforcement forces. It is shown that the wall facing displacements as well as the reinforcement forces in the abutment are smaller than those computed based on a plane strain approximation.

• Journal of Convergence for Information Technology
• /
• v.12 no.3
• /
• pp.286-293
• /
• 2022

Recently, the importance of elemental technologies constituting smart factories is increasing due to the 4th Industrial Revolution, and simulation is widely used as a tool to learn these technologies. In particular, PID control is an automatic control technique used in various fields, and most of them analyze mathematical models in certain situations or research on application development with built-in controllers. In actual educational environment requires PID simulator training as well as PID control principles. In this paper, we propose a model that enables education and practice of various PID controls through 3D simulation. The proposed model implemented virtual balls and Fan and implemented PID control by configuring a system so that the force can be lifted by the air pressure generated in the Fan. At this time, the height of the ball was expressed in a graph according to each gain value of the PID controller and then compared with the actual system, and through this, satisfactory results sufficiently applicable to the actual class were confirmed. Through the proposed model, it is expected that the rapidly increasing elemental technology of smart factories can be used in various ways in a remote classroom environment.

• Economic and Environmental Geology
• /
• v.42 no.2
• /
• pp.133-141
• /
• 2009

For economic impact analysis on a R&D project of high-yield groundwater development in Jeju conducted by KIGAM from 2004 to 2007, benefit/cost ratio(BCR), net present value(NPV), and internal rate of return(IRR) were calculated by contingent valuation method(CVM), production function analysis, domestic water market analysis and technology factor analysis. Measurable direct impact parameters among the major outputs of this R&D project consisted the estimation 4 high-yield and high mineral groundwater reserve in Jeju. Annual use of the reserve by piped water and bottled water was estimated as 12.23 million ton and its monetary value was calculated as 293.4 million dollar in 2006 year value applied of 5.5% discount rate. Economic impact of this R&D project in NPV of year 2006, with applying a discount rate of 5.5%, was identified and estimated as 13.66 million dollar in NPV, 4.05 points in BCR, and 22.74% in IRR, respectively. Additional early launch benefit was 5.58 million dollar. Even increased of the 1% discount rate, NPV of this R&D project was also positive as 12.18 million dollar and BCR was 3.71.