• Transactions of Materials Processing
• /
• v.16 no.1 s.91
• /
• pp.61-66
• /
• 2007

Powder injection molding(PIM) is widely used for many parts in the field of automotives, electronics and medical industries, due to the capability of net shaping for complex 3-D geometry. Powder injection mold design for the dental scaler tip, a component of medical appliance, was presented. In comparison with conventional machining process, powder injection molding has many advantages, specially in price and dimensional stability, for molding dental scaler tip which has complex geometry. Both product design and mold design for dental scaler tip were presented. A PIM feedstock was made of stainless series(17-4PH, 316L, 440C) powder and a wax based binder. The 'rapid mold' concept was applied to manufacture the various forms and materials of dental scaler tip including vibration characteristics.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.3
• /
• pp.47-53
• /
• 2005

Model for dust and salt transportation from the dried bottom of the Aral Sea is suggested. Theoretical analysis is based on the turbulent diffusion equation for the averaged function of passive impurity concentration. One-layer model of the atmospheric boundary layer is assumed. Impurity precipitation rates are calculated as the functions of the particle size and the distance source of particles. Analytical solutions for the point and two-dimensional sources of impurities are found. Model calculations for salt and sand transport from the Aral Sea basin are made on the basis of 2D source model with a constant intensity.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.1
• /
• pp.122-129
• /
• 1998

For generation and analysis of the multi-sensory image, we propose a new three dimensional (3D) modeling method considering an iternal heat source. We represent the heat conduction process within th object as an equivalent thermal circuit. Therefore, without a complex computation, our modeling approach can obtain thermal features of the object. By using the faceted model, the proposed method can express the accurate visual signatures of the object. Comparing the estimates datum with the obtained surface temperatures, we have demonstrated that the proposed method can provide a precise thermal features. The thermal images by out model is applicable to simulate a tracking loop of an IR missile.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.833-834
• /
• 2015

For the design of a permanent magnet linear synchronous machine with slotless stator structure, this paper addresses a three-dimensional (3D) analytical approach for consideration of end effects. In contrast, analytical method can derive solutions in substantially shorter times with high reliability. Therefore, we derive accurate analytical solutions to dramatically reduce the time need for analysis. In addition, we performed characteristic analysis of permanent magnet linear synchronous machine (PMSLM) according to PM overhang length.

• International Journal of Safety
• /
• v.7 no.1
• /
• pp.35-38
• /
• 2008

The purpose of this study is to extract typical body shape of Korean VDT workers based on the three-dimensional Korean shape data and recommendation supported by Korea Occupational Safety & Health Agency during VDT task. Desirable desk heights and chair heights for the selection of the VDT working posture is proposed by analyzing moment, compression and joint shear for lumbar and spine of Korean adult(male and female). The desirable heights for desk and chair can be selected by the least load method during VDT tasks. In the current work the figures of Korean 50th percentile offered by CATIA-HUMAN are used as the average body type of the grown-ups and this research is accomplished with the recommended size of all working attitude such as the height of a monitor except for the height of desk and chair and the degree of watching the monitor.

• Computers and Concrete
• /
• v.26 no.5
• /
• pp.377-384
• /
• 2020

A two-dimensional particle flow cod (PFC) is used to study the effect of missile impact on the concrete target. For this purpose firstly calibration of numerical model was performed so that tensile strength of numerical models and experimental sample were the same. Secondly, a concrete model was built. The number of concrete layers and the angle of concrete layers related to horizontal axis were changed. Their numbers were 1, 2, 3 and 4. The angles were 0°, 15°, 30°, 45°, 60°, 75° and 90°. A semi-circle missile was simulated at top of the concrete layers. Its velocity in opposite side of Y direction was 100 m/s. three measuring circles were situated at the below the missile in the model to receive the applied force. The load in the missile and measuring circles together with failure pattern were registered at the beginning of the impaction. The results show that concrete layers number and concrete layers angle have important effect on the failure load while the failure pattern was nearly constant in all of the models.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.202-205
• /
• 2011

A rotating propeller of turboprop aircraft gives much effect on the aerodynamic characteristics of wing such as lift, moment and stall. Specially, a rotating propeller changes the lift and moment characteristics when aircrafts are in landing or take-off condition. In the present paper, 3-dimensional Navier-Stokes simulations for the interaction of propeller and wing were carried out. For rotating propeller, unsteady sliding mesh method was used to simulate a relative motion. For the power effect analysis in landing and take off configurations, double slotted flap was also considered and the aerodynamic characteristics were investigated. It was shown that the propeller slipstream enhanced the lift slope including maximum lift and this enhancement was more dominant with high lift device.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.1
• /
• pp.30-35
• /
• 2017

This study is about distributions of flow in a ventilation system used in a louver for marine. In this study, to describe the flow in the ventilation opening louver, 3-dimensional steady-state turbulence was assumed to govern the equation. The flow field with pressure distribution according to the inlet velocity at the louver types is also compared. Flow analysis was performed for the louver numerical analysis on two types. The numerical analysis results in the louver blade indicated increased flow resistance at type-1.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.8
• /
• pp.889-895
• /
• 2007

Quantifying dynamic stability is important to assessment of falling risk or functional recovery for leg injured people. Human locomotion is complex and known to exhibit nonlinear dynamical behaviors. The purpose of this study is to quantify major joints of the body using chaos analysis during walking. Time series of the chaotic signals show how gait patterns change over time. The gait experiments were carried out for ten young males walking on a motorized treadmill. Joint motions were captured using eight video cameras, and then three dimensional kinematics of the neck and the upper and lower extremities were computed by KWON 3D motion analysis software. The correlation dimension and the largest Lyapunov exponent were calculated from the time series to quantify stabilities of the joints. This study presents a data set of nonlinear dynamic characteristics for eleven joints engaged in normal level walking.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.155-160
• /
• 2008

Using a three-dimensional (3-D) FE analyses, this paper provides the shape optimization of the standard test specimen for the torsion test, as well as a method for analyzing effects of misalignment under the angular and concentric misalignment. For verification, FE analysis is performed, which is designed for the perfectly full-model. To optimize the design shape of the torsion-controlled fatigue test specimen, we performed sensitivity analysis using shape parameters. Additionally, two kinds of misalignment (angular misalignment and concentric misalignment) are applied to the circular and tubular specimens to show effects of misalignments in the FE analysis. The present results will provide valuable information for designing shafts for every kind of mechanical system under torsional force.