• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.11a
• /
• pp.63-66
• /
• 2019

가상현실과 증강현실의 대중화로 사람의 동작을 실시간 3D 애니메이션으로 구현하는 연구가 활발히 진행 중이다. 특히 Microsoft에서 키넥트 (Kinect)를 개발함에 따라 저렴한 가격에 부가적인 장치 필요 없이 간단한 조작만으로도 3D 모션 정보 취득이 가능해졌다. 하지만 키넥트 카메라는 마커 기반 모션 캡쳐 시스템에 비해 관절 정보의 추정 성능이 뒤떨어져 낮은 정확도를 보이는 단점을 지니고 있다. 이에 본 논문에서는 키넥트 카메라를 이용해 사람의 관절 정보를 취득하고 이것에 관절 가동 범위 (Range of Motion, ROM)를 적용하여 비정상적인 동작을 보정하는 시스템을 제안한다. ROM을 구하는 방법으로는 수행자가 모든 관절에 대해 회전 운동을 수행한 뒤 관절들의 회전 운동 정보를 취득, 분석하여 정상적인 ROM을 설정하고 실험으로부터 사람의 동작이 개선되는 것을 확인하였다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.3
• /
• pp.152-155
• /
• 2013

In this paper, the reduction of the figure of merit depending on the increased spill-over when the parabolic reflector is cut off partially for low-profile configuration in the satellite broadcast receiving antenna is analyzed. Also for the accurate analysis and simulation, it is considered that the noise temperature is increased due to the effect of ground thermal noise toword the sidelobes and back lobes when the antenna is tracked from $0^{\circ}$ to $60^{\circ}$ in elevation angle, and that the total noise temperature is increased because to the noise figure of LNA. As the results, noise temperature is increased up to about 15K and G/T ratio is decreased to about 2.5dB, when the reflector is cut 35% off partially.

• Journal of Broadcast Engineering
• /
• v.14 no.4
• /
• pp.419-427
• /
• 2009

We present a novel head tracking system for stereoscopic displays that ensures the viewer has a high degree of movement. The tracker is capable of segmenting the viewer from background objects using their relative distance. A depth camera using TOF(Time-Of-Flight) is used to generate a key signal for eye tracking application. A method of the moving parallax barrier is also introduced to supplement a disadvantage of the fixed parallax barrier that provides observation at the specific locations.

• Journal of Broadcast Engineering
• /
• v.14 no.1
• /
• pp.70-80
• /
• 2009

We propose an ideal line coding for high speed data communication in visible light communication system. B4-HBT line coding is defined as follow. The 1 bit is +V at first though 1 encodes +Voltage and -Voltage doing change of shift each other, then -V newly. V that is been mutually contradictory for 1 bit that exist before that if continuous 0 bits exist 4 here same and reduces mistake because has reverse mark V in 4 continuous last 0 bits and gives half bit variation in 1 bit and made effect of noise low. 2${\sim}$3 dB profit is seen comparing with line coding that exist in simulation result.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.217-222
• /
• 2012

Using modal transmission-line theory (MTLT), it explores rigorously the polarization characteristics of plasmonic optical polarizer. To verify the validity of the approach proposed in this paper, a novel polarization condition, which is called mode suppression ratio, is defined. The numerical results reveal that the polarization length of plasmonic optical polarizer is $10{\mu}m$ dramatically shorter than that of conventional dielectric optical polarizer. Furthermore, the insertion loss of plasmonic polarizer consisting of metal Ag is small enough to be neglected below -1dB.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.237-242
• /
• 2013

There are some limitations to use the fitness center frequently by various reasons, excessive business workload, geographic location and time limit. This research specially focuses on the developement of health care application tool for aerobic/anaerobic exercise in a house accompanied by training coach, simply for the purpose of preventing from a boredom moment by exercing alone. This study newly proposes the realization of program tool by using Microsoft Kinect hardware tool which can be seen easily in the internet stores and can recognize the user. In addition, this program are designed to take care of movement control, weight and calory by maping the perceived user implementing modeling of 3D model.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.51-56
• /
• 2014

TETRA(TErrestrial Trunked RAdio) provide specialized disaster radio communication services as a standard European for digital TRS(Trunked Radio System). Especially, DMO(Direct Mode Operation) feature is used effectively in the radio shadow areas which base station does not propagate radio signal because it can communicate directly with terminal to terminal without base station's relay function. However, to effectively used DMO feature, radio coverage prediction information should be provided to users. Therefore in this paper, we were calculated link budget of TETRA DMO terminals which were distributing and operating in the country and then predicted reaching distance about radio propagation to be applied with path loss model.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.125-129
• /
• 2014

In this paper, design and fabrication of the GPS receiving antenna using Hilbert curve fractal structure was proposed. The size of the antenna was miniaturized by transforming dipole structure into monopole structure because its size increases if Hilbert curve fractal dipole structure is used. To use a Hilbert curve structure, the current directions of the radiator were made oppositely each other. The size of the antenna is $10{\times}10{\times}0.8[mm]$, the line width is 0.25[mm]. The resonant frequency is 1.58[GHz] and its range is 1.52[GHz] ~ 1.65[GHz]. Frequency bandwidth is 130[MHz]. Antenna maximum gain is 3.09[dBi].

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.551-556
• /
• 2009

3-D CAD (Computer Aided Design) system is an indispensable tool for manufacturing. A lot of engineers have studied for the methods to generate a curved surface on an N-sided shape, which is the basic technology of 3-D CAD systems. This surface generation, however, has three problems on the case of long and narrow shapes: the resultant surface is distorted, the surface is not continuous to adjacent surfaces, or additional user inputs are required to generate the surface. Conventional methods have not yet solved these problems at the same time. In this paper, we propose the method to generate internal curves that divide a long and narrow shape into regular N-sided sections so as to divide the shape into an N-sided section and four-sided ones. Our method controls the shape of internal curves by dividing an N-sided long and narrow shape into an N-sided section and four-sided ones, and solves distortion of the generated curved surface. In addition, each of the generated sections is interpolated with G1-continuous surfaces. This process does not require any user's further input. Therefore, the three problems mentioned above will be solved at the same time.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.695-698
• /
• 2009

Three-dimensional (3D) shape recognition and distance recognition methods utilizing monocular camera systems have been required for field of virtual-reality, computer graphics, measurement technology and robot technology. There have been many studies regarding 3D shape and distance recognition based on geometric and optical information, and it is now possible to accurately measure the geometric information of an object at short range distances. However, these methods cannot currently be applied to long range objects. In the field of virtual-reality, all visual objects must be presented at widely varying ranges, even though some objects will be hazed over. In order to achieve distance recognition from a landscape image, we focused on the use of aerial perspective to simulate a type of depth perception and investigated the relationship between distance and color perception. The applicability of our proposed method was demonstrated in experimental results.