• 천문학회지
• /
• 제48권5호
• /
• pp.313-323
• /
• 2015

Active galactic nuclei (AGN) are known for irregular variability on all time scales, down to intra-day variability with relative variations of a few percent within minutes to hours. On such short timescales, unexplored territory, such as the possible existence of a shortest characteristic time scale of activity and the shape of the high frequency end of AGN power spectra, still exists. We present the results of AGN single-dish fast photometry performed with the Korean VLBI Network (KVN). Observations were done in a “anti-correlated” mode using two antennas, with always at least one antenna pointing at the target. This results in an effective time resolution of less than three minutes. We used all four KVN frequencies, 22, 43, 86, and 129 GHz, in order to trace spectral variability, if any. We were able to derive high-quality light curves for 3C 111, 3C 454.3, and BL Lacertae at 22 and 43 GHz, and for 3C 279 at 86 GHz, between May 2012 and April 2013. We performed a detailed statistical analysis in order to assess the levels of variability and the corresponding upper limits. We found upper limits on flux variability ranging from ~1.6% to ~7.6%. The upper limits on the derived brightness temperatures exceed the inverse Compton limit by three to six orders of magnitude. From our results, plus comparison with data obtained by the University of Michigan Radio Astronomy Observatory, we conclude that we have not detected source-intrinsic variability which would have to occur at sub-per cent levels.

• Ocean and Polar Research
• /
• 제37권4호
• /
• pp.279-285
• /
• 2015

In this study, the potential capacity of the crude extract and its solvent fractions from S. siliquanstrum against adipocyte differentiation were evaluated in 3T3-L1 adipocytes. The anti-adipogenic effect of S. siliquanstrum was evidenced by the fact that its crude extract decreases the lipid accumulation of differentiating cells and the expression levels of crucial adipogenesis markers, peroxisome proliferator-activated receptor $(PPAR){\gamma}$ and CCAAT/enhancer-binding protein $(C/EBP){\alpha}$. All solvent fractions except the water fraction showed an observable decrease in lipid accumulation and $PPAR{\gamma}$ and $C/EBP{\alpha}$ expressions. In conclusion, these results suggest that S. siliquanstrum possesses obesity inhibiting components, which may possibly be used as a valuable anti-obesity agent for reducing the risk of obesity.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.279-279
• /
• 2010

한국형 헬륨 냉각 고체형 증식(Helium Cooled Solid Breeder : HCSB) 시험 블랑켓(Test Blanket Module : TBM)은 삼중수소 증식을 위해서 $Li_2TiO_3$ 및 $Li_4SiO_4$ 페블을 고려하고 있으며, 중성자 반사 재료로는 SiC가 코팅된 흑연 페블을 사용할 예정이다. $Li_2TiO_3$ 및 $Li_4SiO_4$ 페블을 제조하기 위해서는 먼저 각각의 분말 제조가 선행되어야 한다. $Li_2TiO_3$ 분말을 합성하기 위해서는 먼저 Lithium 금속염과 Isopropoxide를 용매 및 폴리머 캐리어로서의 두 가지 기능을 하는 에틸렌글리콜에 첨가한 후 가열하여 완전히 용해시킨 후 혼합 용액을 건조시켜 겔형의 전구체를 제조한다. 이를 하소한 후 결정화시켜 Titanate 분말을 얻는데 이때의 건조, 하소 및 결정화 온도의 조건에 따른 분말의 크기 및 특성이 각각 다르다. 즉 하소 온도가 $600^{\circ}C$ 미만이면 열분해된 폴리머로부터 잔유 탄소가 남게 되고, $700^{\circ}C$를 초과하면 결정화가 시작된다. 이렇게 얻어진 Titanate분말은 지르코니아 볼을 이용하여 약 24 시간 동안 볼 밀링 과정을 통해 입도분포가 좁은 미세한 Titanate 분말로 만들었다. $Li_2TiO_3$ 페블은 위의 과정에서 얻어진 미세분말에 바인더를 이용하여 페블화 시킨 후 $1200^{\circ}C$의 전기로에서 최종 소결한 것이다. 중성자 반사 재료인 흑연페블은 강도가 약하기 때문에 표면에 SiC를 수 ${\mu}m$ 코팅해서 사용할 예정이다. 선행실험으로 건식법을 이용하여 SiC 코팅을 실시했으며, 그 결과를 소개할 것이다.

• 대한화학회지
• /
• 제44권6호
• /
• pp.513-517
• /
• 2000

TTF (tetrathiafulvalene) 유도체의 전구체로서 5,6-dimethyl-1,3-dithiolo[4,5-b][1,4]dithiin-2-thione (화합물 3)을 로손반응에 의하여 합성하였다. 치환기의 종류에 따라 1,4-dithiin이나 티오펜이 포함된 두 가지의 서로 다른 생성물이 얻어졌고, 이들은 $^{13}C$ NMR과 고 분해능 전자충돌(HREI) 질량분석 분광학으로 특성화하였다. 화합물 3의 합성은 X-선 구조분석으로도 확인되었다. 결정학적 자료: 삼사정계, 공간군 P1, a=4.145(2)${\AA}$, b=10.600(2)${\AA}$, c=12.279(2)${\AA}$, ${\alpha}=71.440(10)^{\circ},\;{\beta}=84.30(2)^{\circ},\;{\gamma}=87.31(2)^{\circ}$, Z=2, $R(wR_2$)=0.0559(0.1416). 두 가지 생성물의 생성 기구를 비교하여 설명하였다.

• Toxicological Research
• /
• 제35권3호
• /
• pp.279-285
• /
• 2019

In this study, we investigated the therapeutic potential of Cinnamomum camphora leaves on allergic skin inflammation such as atopic dermatitis. We evaluated the effects of C. camphora leaves on human adult low-calcium high-temperature keratinocytes and atopic dermatitis mice. C. camphora leaves inhibited Macrophage-derived chemokine (an inflammatory chemokine) production in $interferon-{\gamma}$ (10 ng/mL) stimulated Human adult low-calcium high-temperature keratinocytes in a dose dependent manner. C. camphora leaves suppressed the phosphorylation of janus kinase signal transducer and activator of transcription 1. C. camphora leaves also suppressed the phosphorylation of extracellular signal-regulated kinase 1/2, a central signaling molecule in the inflammation process. These results suggest that C. camphora leaves exhibits anti-inflammatory effect via the phosphorylation of signal transducer and activator of transcription 1 and extracellular signal-regulated kinase 1/2. To study the advanced effects of C. camphora leaves on atopic dermatitis, we induced experimental atopic dermatitis in mice by applying 2,4-dinitrochlorobenzene. The group treated with C. camphora leaves (100 mg/kg) showed remarkable improvement of atopic dermatitis symptoms: reduced serum immunoglobulin E levels, smaller lymph nodes with reduced thickness and length, decreased ear edema, and reduced levels of inflammatory cell infiltration in the ears. Interestingly, the effects of C. camphora leaves on atopic dermatitis symptoms were stronger than those of hydrocort cream, a positive control. Taken together, C. camphora leaves showed alleviating effects on the inflammatory chemokine production in vitro and atopic dermatitis symptoms in vivo. These results suggest that C. camphora leaves help in the treatment of allergic inflammation such as atopic dermatitis.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1994년도 춘계공동학술대회논문집; 창원대학교; 08월 09일 Apr. 1994
• /
• pp.270-279
• /
• 1994

이 논문에서는 이런 내용들을 다루려고 한다. 1. 자동화 현황과 시장 변화 2. 가공 자동화와 FMS 3. FMS 시스템 구성요소 4. FMS simulation 5. 가공 시스템의 구성 예 6. 시스템 적용 M/C Pallet 7. 구성요소의 안전기능 예 8. Tool/Pallet ID system 9. 자동화라인 구축 예

• Smart Structures and Systems
• /
• 제4권3호
• /
• pp.279-290
• /
• 2008

The modeling and parameter estimation of a damped one-degree-of-freedom mass-spring system is examined. This paper presents a method for estimating the system parameters (damping coefficients and natural frequency) from measured free-vibration motion of a system that is modeled to include both subcritical viscous damping and kinetic Coulomb friction. The method applies a commercially available least-squares curve-fitting software function to fit the known solution of the equations of motion to the measured response. The method was tested through numerical simulation, and it was applied to experimental data collected from a laboratory mass-spring apparatus. The mass of this apparatus translates on linear bearings, which are the primary source of light inherent damping. Results indicate that the curve-fitting method is effective and accurate for both perfect and noisy measurements from a lightly damped mass-spring system.

• 한국식생활문화학회지
• /
• 제26권3호
• /
• pp.279-282
• /
• 2011

We evaluated the sensory characteristics of Gangjung base obtained from various manufacturers, using a sensory descriptive analysis. Significant differences were observed for all sensory attributes of Gangjung samples with the exception of 'toothpacking'. Sample A showed high intensities for 'external color', 'external roughness', 'sweetness', 'toasted soybean powder flavor', 'crispness', 'fracturability', 'oiliness', and 'loose particles,' whereas it had low intensities for 'rice flour flavor', 'hardness', and 'toughness' compared to those of other samples. Sample B had more 'sourness', 'butyric acid flavor', 'fermented rice flavor', and 'degree of melting' but lower 'air cell size', 'fracturability', and 'flake roughness'. Sample C showed high intensities for 'expansion', 'hardness', 'crispness', and 'flake roughness', whereas sample D showed low intensities for 'expansion' and 'sourness'. These results indicate that Gangjung base samples are markedly different depending on the manufacturer.

• 한국환경과학회지
• /
• 제30권3호
• /
• pp.279-287
• /
• 2021

In this study, the composition and morphology of deposited dust particles with size ranging from a few to tens ㎛ were investigated using SEM/EDX (scanning electron microscopy with energy dispersive x-ray spectrometer). Then deposited dust particles were classified into 8 groups: quartz, aluminosilicates, ca-rich, Fe/Ti oxide, carbon-rich, industrial particle, Fe-rich, and biogenic particle. The sources of deposited dust were high in the order of aluminosilicates 41% > biogenic 18% > Fe-rich 11% > quartz and C-rich 8% > industrial 7% > Fe/Ti oxide 5% > Ca-rich 1%. In particular, the ratio of biogenic particles was relatively high due to influence of pollen. The ratio of carbon-rich was 11% at YM site, 10% at MD site, and 4% at MO site, and the site close to the large emission source was high.

• 열처리공학회지
• /
• 제30권6호
• /
• pp.279-284
• /
• 2017

Mechanical properties of titanium alloy can be improved by controlling microstructure through heat treatment. In this study, Ti-3Al-8V-6Cr-4Mo-4Zr metastable beta titanium alloy, was controlled for excellent mechanical property and sound formability through various high temperature heat treatment and aging conditions and the optimum heat treatment conditions were determined. The specimens were heat-treated at $950^{\circ}C$, followed by various aging treatments from $430^{\circ}C$ to $500^{\circ}C$ for 1 to 24 h. As aging temperature and holding time increased, hardness increased by ${\beta}^{\prime}$ phase formation and precipitation of secondary ${\alpha}$ phase in ${\beta}$ matrix. However, the optimum aging temperature and holding time for mechanical properties were at $450{\sim}470^{\circ}C$ for 8~16 hr. Hardness values of the specimen aged at $450^{\circ}C$ for 8 h were found to be the highest. These results can be effectively applied to fabrication of spring with better formability and mechanical property.