• 인간행동과 음악연구
• /
• 제13권2호
• /
• pp.67-83
• /
• 2016

본 연구는 감정단어의 억양 패턴을 음향학적으로 분석하여 멜로디의 음높이 패턴으로 전환한 뒤 그 특성을 알아보았다. 이를 위해 만 19-23세 여성 30명을 대상으로 기쁨, 화남, 슬픔을 표현하는 4음절 감정단어의 음성자료를 수집하였다. 총 180개의 어휘를 수집하고 Praat 프로그램을 이용하여 음절 당 평균 주파수(f0)를 측정한 후 평균 음정과 음높이 패턴의 멜로디 요소로 전환하였다. 연구 결과, 첫째, 감정단어의 음높이 패턴은 '즐거워서' A3-A3-G3-G3, '즐거워요' G4-G4-F4-F4, '행복해서' C4-D4-B3-A3, '행복해요' D4-D4-A3-G3, '억울해서' G3-A3-G3-G3, '억울해요' G3-G3-G3-A3, F3-G3-E3-D3, '불안해서' A3-A3-G3-A3, '불안해요' A3-G3-F3-F3, '침울해서' C4-C4-A3-G3, '침울해요' A3-A3-F3-F3으로 나타났다. 둘째, 음 진행에서는 기쁨이 넓은 간격의 도약 진행, 화남이 좁은 간격의 도약 진행, 슬픔이 넓은 간격의 순차 진행 특성을 보였다. 본 연구에서는 감정의 속성과 본질, 한국어의 음성 특성을 고려하여 감정단어의 억양 패턴을 분석하고, 이를 멜로디 요소에 반영한 특성을 제시하였다. 또한, 체계적이고 객관화된 방법으로 말과 멜로디의 전환 가능성 및 적합성을 확인한 것에 의의가 있다. 본 연구의 결과는 감정을 효과적으로 표현할 수 있는 멜로디 창작 방안을 마련하기 위한 근거 자료로 활용될 수 있다.

• 대한화학회지
• /
• 제52권3호
• /
• pp.249-256
• /
• 2008

3-Acetyl/Formyl 4-hydroxy-2H(1)-benzopyran-2-one를 malonitrile와 ethyl cyanoacetate로 처리하여 각각 1,1-dicyano-2-[4/-hydroxy-2/H(1)-benzopyran-2/-one-3/-yl] ethene/propene 2a-h와 ethyl-2-cyano-3-[4/-hydroxy-2/H (1)-benzopyran-2/-one-3/-yl] propenoate/butenoate 3a-h를 얻었다. NaN3와 2a-h의 1.3 dipolar 반응에서 4a-h인 tetrazole유도체를 얻었다. 3a-h는 PPA를 이용한 고리화 반응으로 3-cyano-2H,5H-pyrano [3, 2-c] benzopyran-2,5-diones 5a-h를 얻었다. 5a-h는 NaN3와1.3 dipolar 반응으로 -(1/H-tetrazol-5/-yl)-2H,5H-pyrano[3, 2-c] benzopyran-2,5-diones 6a-h얻었다. 화합물의 구조는 스펙트럼과 자료 분석을 기초로 입증했다.모든 화합물은 항균 활성을 검사하였고 의미있는 항균성을 가짐을 밝혔다. 2h화합물과 4h 화합물은 50 킽/mL에서 활성을 보였다

• 미생물학회지
• /
• 제45권4호
• /
• pp.291-299
• /
• 2009

본 연구에서는 Human HtrA3 (HtrA3)의 효소활성을 분자수준에서 연구하기 위해 HtrA간의 상동성과 기존에 알려진 maturation site들을 비교 분석하여 예상 mature HtrA3인 M1-HtrA3와 M2-HtrA3를 발현하는 construct를 제작하였다. pGEX system을 통해 Top10 균주에서 발현, 정제한 M1-HtrA3 단백질은 $10{\mu}g$/L를 정제할 수 있었으며 발현량 대비 1%를 회수할 수 있었다. M2-HtrA3는 M1보다 5배 가량 많은 양을 정제할 수 있었으며 발현량 대비 회수율은 3배 정도 더 높았다. $\beta$-Casein을 이용한 in vitro cleavage test를 통해 M1, M2 form 모두 protease 활성을 갖는 것을 확인하였다. 또한, $\beta$-casein cleavage를 통해 HtrA serein protease들 간의 상대적인 활성을 비교한 결과, HtrA3와 HtrA2는 HtrA1보다 약 2배 더 높은 proteolytic cleavage 활성을 보였다. 본 연구에서 정립한 protease 활성을 지닌 HtrA3의 제작과 정제 조건은 HtrA3의 substrate를 탐색을 용이하게 할 수 있을 것이며, HtrA3 연관된 질환의 발병기전과 세포 신호전달을 이해하는 연구에 활용될 수 있을 것이다.

• 한국환경농학회지
• /
• 제42권4호
• /
• pp.389-395
• /
• 2023

This study evaluated the effects of gibberellic acid (GA₃) on the growth and quality of creeping bentgrass (Agrostis palustris Huds.). Experimental treatments included a No application of fertilizer and GA₃ (NFG) Control [3 N active ingredient (a.i.) g/m²], 0.3GA₃ (GA₃ 0.3 a.i. mg/m²/200 mL), 0.6GA₃ (GA₃ 0.6 a.i. mg/m²/200 mL), 1.2GA₃ (GA₃ 1.2 a.i. mg/m²/200 mL), and 2.4GA₃ (GA₃ 2.4 a.i. mg/m²/200 mL). Additionally, the study included a 1.5N+GA₃ experiment with similar GA₃ treatments combined with 1.5N a.i. g/m² : NFG, Control (3N a.i. g/m²), 1.5N+ 0.3GA₃ (1.5N a.i. g/m²+GA₃ 0.3 a.i. mg/m²/200 mL), 1.5N+0.6GA₃ (1.5N a.i. g/m²+GA₃ 0.6 a.i. mg/m²/200 mL), 1.5N+1.2GA₃ (1.5N a.i. g/m²+GA₃ 1.2 a.i. mg/m²/ 200 mL), and 1.5N+2.4GA₃ (1.5N a.i. g/m²+GA₃ 2.4 a.i. mg/m²/200 mL). Compared to the NFG, turf color index chlorophyll content was not significantly different (p< 0.05). However, shoot length in 1.2GA₃, 2.4GA₃, 1.5N+0.3GA₃, 1.5N+0.6GA₃, 1.5N+1.2GA₃, and 1.5N+2.4GA₃ treatments increased by 0.8%, 10.6%, 5.15%, 8.3%, 13.5 %, and 21.6%, respectively, compared to the control. As compared to the control, clipping yield in 1.5N+1.2GA₃ and 1.5N+2.4GA₃ treatments increased by 7.1% and 14.3 %, respectively. These results indicated that GA₃ application increased shoot length, with the 1.2GA₃ treatment showing shoot length similar to the control (3N a.i. g /m² ).

• Bulletin of the Korean Chemical Society
• /
• 제17권10호
• /
• pp.909-918
• /
• 1996

Syntheses of carbapenam skeletons were achieved from 1,3-propanediol through 1,3-dipolar cycloaddition. 3-(Tetrahydropyran-2-yloxy)-(10) and 3-(t-butyldimethylsilyloxy) propanal (13) were obtained from 1,3-propanediol. 3-Hydroxypropanals (10, 13, 14) were reacted with N-hydroxyglycine esters to give C-(2-hydroxyethyl)-N-alkoxycarbonylmethylnitrones (15a-15d). 1,3-Dipolar cycloaddition of the nitrones with methyl acrylate or ethyl crotonate gave 3-(2-hydroxyethyl)isoxazolidines (16a-16b, 17a-17b, 18, 19a-19b). 3-(2-Hydroxyethyl)isoxazolidines (17a, 17c, 19a, 19b) were converted to 3-(2-iodoethyl)isoxazolidines (21a-21d) or 3-phenylthiocarbonylmethylisoxazolidines (25a-25d) which were cyclized to give 2-oxa-1-azabicyclo[3.3.0]octanedicarboxylates (22a-22d, 26a-26d). 2-Oxa-1-azabicyclo[3.3.0]octane-4,8-dicarboxylates (22c-22d, 26c-26d) were transformed to 6-(l-hydroxyethyl)carbapenam-3-carboxylates (30a-30b, 31a-31b).

• 한국세라믹학회지
• /
• 제27권4호
• /
• pp.560-566
• /
• 1990

The early hydration characteristics according to the C3A polymorphism and the presence of gypsum, in order to establish the hydration mechanism of the system C3S-C3A, have been studied. The hydration rate of C3A was changed according to the its crystal structure and influenced the hydration of C3S. That is, the hydration rate of C3S was accelerated in case of orthorhombic-C3A, but that was slightly retarded in case of melt-C3A than that of cubic-C3A. In the system C3S-C3A-gypsum, the retardation phenomenon of the reaction of monosulfate formation was observed in case of both orthorhombic and melt-C3A.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.48-51
• /
• 2000

The poly(3-hydroxybutyrate) (PHB) synthase of Ralstonia. eutropha, which was produced by a recombinant strain E. coli and purified in one-step with a methyl-HIC column to a purity of more than 90%, was used to polymerize 3-hydroxypropionyl-CoA (3HPCoA) and to copolymerize 3HPCoA with 3-hydroxybutyryl-CoA (3HBCoA) in vitro. A $K_m$ of $189\;{\mu}M$ and a $k_{cat}$ of $10\;sec^{-1}$ were determined for the activity of the enzyme in the polymerization reaction of 3HPCoA based on the assumption that the dimer form of PHB synthase was the active form. Free coenzyme A was found to be a very effective competitive inhibitor for the polymerization of 3HPCoA with a $K_i$ of $85\;{\mu}M$. The maximum degree of conversion of 3HPCoA to polymer was less than 40 %. In the simultaneous copolymerization reactions of these two monomers, both the turnover number for the copolymerization reaction and the maximum degree of conversion of 3HPCoA and 3HBCoA to copolymers increased with an increase in the amount of 3HBCoA in the monomer mixture. However, the maximum conversion of 3HPCoA to a copolymer was less than 35 % regardless of the ratio of 3HPCoA to 3HBCoA. Block copolymers were obtained by the sequential copolymerization of the two monomers and these copolymers had a much narrower molecular weight distribution than those obtained by the simultaneous copolymerization of the same molar ratio of 3HPCoA and 3HBCoA.

• 한국재료학회지
• /
• 제21권12호
• /
• pp.644-649
• /
• 2011

[ $A_{3-2x/3}Al_{1-z}In_{z}O_4F:Eu_x^{3+}$ ](A = Ca, Sr, Ba, x = -0.15, z = 0, 0.1) oxyfluoride phosphors were simply prepared by the solid-state method at $1050^{\circ}C$ in air. The phosphors had the bright red photoluminescence (PL) spectra of an $A_{3-2x/3}Al_{1-z}In_{z}O_4F$ for $Eu^{3+}$ activator. X-ray diffraction (XRD) patterns of the obtained red phosphors were exhibited for indexing peak positions and calculating unit-cell parameters. Dynamic excitation and emission spectra of $Eu^{3+}$ activated red oxyfluoride phosphors were clearly monitored. Red and blue shifts gradually occurred in the emission spectra of $Eu^{3+}$ activated $A_3AlO_4F$ oxyfluoride phosphors when $Sr^{2+}$ by $Ca^{2+}$ and $Ba^{2+}$ ions were substituted, respectively. The concentration quenching as a function of $Eu^{3+}$ contents in $A_{3-2x/3}AlO_4F:Eu^{3+}$ (A = Ca, Sr, Ba) was measured. The interesting behaviors of defect-induced $A_{3-2x/3}Al_{1-z}In_{z}O_{4-{\alpha}}F_{1-{\delta}}$ phosphors with $Eu^{3+}$ activator are discussed based on PL spectra and CIE coordinates. Substituting $In^{3+}$ into the $Al^{3+}$ position in the $A_{3-2x/3}AlO_4F:Eu^{3+}$ oxyfluorides resulted in the relative intensity of the red emitted phosphors noticeably increasing by seven times.

• ETRI Journal
• /
• 제42권2호
• /
• pp.272-281
• /
• 2020

Three-dimensional (3D) selfie services, one of the major 3D printing services, print 3D models of an individual's face via scanning. However, most of these services require expensive full-color supporting 3D printers. The high cost of such printers poses a challenge in launching a variety of 3D printing application services. This paper presents a stencil-based 3D facial relief creation method employing a low-cost RGBD sensor and a 3D printer. Stencil-based 3D facial relief is an artwork in which some parts are holes, similar to that in a stencil, and other parts stand out, as in a relief. The proposed method creates a new type of relief by combining the existing stencil techniques and relief techniques. As a result, the 3D printed product resembles a two-colored object rather than a one-colored object even when a monochrome 3D printer is used. Unlike existing personalization-based 3D printing services, the proposed method enables the printing and delivery of products to customers in a short period of time. Experimental results reveal that, compared to existing 3D selfie products printed by monochrome 3D printers, our products have a higher degree of similarity and are more profitable.

• 생명과학회지
• /
• 제27권10호
• /
• pp.1104-1110
• /
• 2017

히스톤 H3K4의 메칠화는 3T3-L1의 지방세포의 분화를 촉진하는 것으로 알려져 있으나, 히스톤 H3K4 메칠화 효소인 SET1A가 지방세포 분화를 조절하는지에 대해서는 보고된 바가 없다. 그러므로 본 연구에서는 SET1A의 3T3-L1 지방세포의 분화조절과 기전을 연구하였다. SET1A의 발현은 3T3-L1 지방세포 분화과정에서 증가함을 관찰하였다. 3T3-L1 지방전구세포에서 siRNA을 이용하여 SET1A의 발현을 감소시키면 3T3-L1 지방전구세포의 분화가 억제됨을 관찰하여 SET1A가 3T3-L1 지방전구세포의 분화를 촉진함을 알 수 있었다. 이에 대한 조절기전을 알기 위해, SET1A의 발현을 감소시킨 3T3-L1 지방전구세포의 세포증식을 측정한 결과, 분화 초기 단계인 분화 후 2일 동안 3T3-L1 지방세포의 증식이 감소하였다. 또한 분화 후 7일 동안 지방세포세포 분화 조절인자들의 발현을 측정한 결과, SET1A의 발현을 감소시킨 3T3-L1 지방세포에서 $PPAR{\gamma}$의 발현이 감소하였다. 위와 같은 연구결과를 바탕으로, SET1A는 분화초기단계에서는 mitotic clonal expansion 단계를 촉진하고, 분화후기단계에서는 $PPAR{\gamma}$의 발현을 증가시켜 3T3-L1 지방세포의 분화를 촉진함을 알 수 있었다.