• Journal of Digital Convergence
• /
• v.14 no.8
• /
• pp.305-311
• /
• 2016

If the automated image calibration system is performed in the position of non-experts, an expert will be required in every case inefficiently. But this requires an expert only when absolutely necessary. As well as the rapid system operation and efficient workforce can be managed. Image correction to perform projector inspection and management skills and to filter SW plug-in correction is that special theater system maintenance is not only managed efficiently, but also combined image analysis techniques can improve the technical perfection. This paper is to minimize the economic loss by developing a 10-bit High-depth and high-resolution $360^{\circ}$ projection image analysis technique and is to development of the special theater calibration system to effectively support quality.

• The Journal of the Korea Contents Association
• /
• v.15 no.2
• /
• pp.11-20
• /
• 2015

In this paper, we develop an intelligent mobile surveillance system based on binary CDMA for the unmanned automatic tracking and surveillance. That is, we implement a intelligent surveillance system using the binary CDMA wireless communication technology which is applied the merit of CDMA and TDMA on it complexly. This system is able to monitor the site of the accident on network in real time and process the various situations by implementing the security surveillance system. This system pursues an object by the 360-degree using camera, expands image using a PTZ(Pan/Tilt/Zoom) camera zooming function, identifies the mobile objects image within a screen and transfers the identified image to the remote site. Finally, we show the efficiency of the implemented system through the simulation of the controlled situations, such as tracking coverage on objects, object expansion, object detection number, monitoring the remote transferred image, number of frame per second by the image output signal etc..

• Journal of Environmental Health Sciences
• /
• v.43 no.5
• /
• pp.360-369
• /
• 2017

Objectives: The organizational culture of small-scale enterprises is influenced by a lack of awareness of industrial accidents and a business-oriented culture. Therefore, the purpose of this study is to establish a correlation between chemical awareness and worker safety, which is the reason why a company's safety environment is responsible for human factor accidents. Methods: The research model established the organizational culture, human relationships, organizational relationships, workplace culture, safety climate, and safety parameters, all of which affect the perception of chemical substances, then established safety rankings, communication, safety regulations, and safety support. Results: In order to derive the results of this study, the satisfaction level was mostly derived from the degree of engagement (+) depending on the number of years worked, in the hierarchical regression analysis. During work with chemicals, the number of years spent on the level of the service was determined by the influence of the chemical (-). Based on this company, the occurrence of chemical accidents caused by chemical materials was felt to be felt at the risk of causing the hazard to be felt, the absence of physical damage was excluded from the variables. The other variables detected in the variables were $62.8{\pm}24.4$. Conclusion: As a result, it is necessary to develop a statistical model for the verification of the hierarchical regression analysis, and the relationship between safety and awareness of the dangers of chemicals and biological agents requires periodic safety training. Job satisfaction was found to be higher if the level of awareness was sufficient.

• The Journal of the Petrological Society of Korea
• /
• v.5 no.2
• /
• pp.129-134
• /
• 1996

Possibile phase transitions of graphite have been examined experimentally using piston cylinder and DAC with synchrotron radiation. The graphite-forming processes in high pressure and low temperature conditions and the phase change under super high pressure were studied in the conditions of 0.7 Gpa and 270-$360^{\circ}C$ in piston cylinder and under 39.6 Gpa in DAC. In the piston cylinder experiment using LiCO3as a catalyzer, we could synthesize disordered graphites whose TGD values change progressively form 9 to 53. It was known that the temperature of graphitization in 0.7 Gpa is between 270-$300^{\circ}C$. Numerous unknown XRD peaks were observed in the super high-pressure experiment. However, it is difficult to pick up a new peak of a hexagonal diamond phase. Application of the different high pressure apparatus as well as a peculiar X-ray source and various graphite specimen would be useful for super high-pressure experiment, and more detailed works are needed to characterize the unknown phase(s) observed in this study.

• Journal of Broadcast Engineering
• /
• v.23 no.2
• /
• pp.197-205
• /
• 2018

Panoramic image is one of the technologies that are commonly used today. However, technical difficulties still exist in panoramic video production. Without a special camera such as a 360-degree camera, making panoramic video becomes more difficult. In order to make a panoramic video, it is necessary to synchronize the timeline of multiple videos shot at multiple locations. However, the timeline synchronization method using the internal clock of the camera may cause an error due to the difference of the internal hardware. In order to solve this problem, timeline synchronization between multiple videos using visual information or auditory information has been studied. However, there is a problem in accuracy and processing time when using video information, and there is a problem in that, when using audio information, there is no synchronization when there is sensitivity to noise or there is no melody. Therefore, in this paper, we propose a timeline synchronization method between multiple video using audio waveform. It shows higher synchronization accuracy and temporal efficiency than the video information based time synchronization method.

• Korean Journal of Metals and Materials
• /
• v.48 no.6
• /
• pp.565-569
• /
• 2010

We report on the characteristics of indium-oxide-doped ZnO (IZO) ohmic contact to p-GaN. The IZO ohmic contact layer was deposited on p-GaN by a Roll-to-Roll (RTR) sputter method. IZO contact film with a thickness of 360, 230 and 100 nm yielded an ohmic contact resistance of $4.70{\times}10^{-4}$, $5.95{\times}10^{-2}$, $4.85{\times}10^{-1}\;{\Omega}cm^{2}$ on p-GaN when annealed at $600{^{\circ}C}$ for 1 min under a nitrogen ambient, respectively. While the transmittance of IZO film with a thickness of 360 nm slightly increased in the wavelength range of 380-800 nm after annealing, the transmittance rapidly increased up to 80% after annealing at $600{^{\circ}C}$ in the wavelength range of 380~430 nm because the crystallization of IZO film and created Ga vacancies near the p-GaN surface region were affected by the annealing. These results indicate that ohmic contact resistance and transmittance of the IZO films improved.

• Journal of Digital Convergence
• /
• v.17 no.2
• /
• pp.37-45
• /
• 2019

This study investigated whether the model attributes of VR Ads (3D effect, presence, Dynamics, Amusement) affect the attitude of the advertising. We also examined the mediating role of consumer's innovation in the model attributes and advertising attitude of VR advertisements. To do this, VR equipment was used to induce real advertisers to experience advertisements. The causal relationship between variables was examined through covariance structure analysis. The results are as follows. First, all independent variables of the VR advertising model have a positive effect on the consumer's innovation. Second, the 3D effect, Amusement of the VR advertising model have a positive effect on the attitude of the advertising. Third, the effects of the VR advertising model on all variables are mediated by the consumer's innovation of the VR advertisement. The results of this study provide implications for understanding the characteristics of VR Ads.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.4
• /
• pp.529-535
• /
• 2020

It is important to secure the driver's external field view in armored vehicles surrounded by iron armor for preparation for the enemy's firepower. For this purpose, a 360 degree rotatable surveillance camera is mounted on the vehicle. In this case, the key idea is to recognize the head of the driver wearing a helmet so that the external camera rotated in exactly the same direction. In this paper, we introduce a method that uses a MEMS-based AHRS sensor and a illuminance sensor to compensate for the disadvantages of the existing optical method and implements it with low cost. The key idea is to set the direction of the camera by using the difference between the Euler angles detected by two sensors mounted on the camera and the helmet, and to adjust the direction with illuminance sensor from time to time to remove the drift error of sensors. The implemented prototype will show the camera's direction matches exactly in driver's one.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.121-126
• /
• 2023

As service utilization for IT technologies such as artificial intelligence, big data, and IOT has recently increased, cloud computing has been introduced to efficiently manage vast amounts of data and IT infrastructure resources that process them to provide stable and reliable information services while streamlining infrastructure costs. Efforts for this are ongoing. This thesis compares and analyzes the operation results before and after cloud adoption in terms of system failures for 426 systems at 360 branches nationwide in cloud systems of companies operating a total of 1,750 cloud systems. As a result of the analysis, the number of failures and failure types , service downtime, etc., the introduction of the cloud yielded significant results in securing service continuity. Through this result, it is expected to provide meaningful implications to companies expecting to secure service continuity by adopting the cloud.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.571-572
• /
• 2022

Recently, VR/AR(virtual reality/augmented reality) contents have actively increased, and various services related to VR/AR allow users to experience remote places. Also, Metaverse technologies based on VR/AR generally used to provide content in virtual spaces. In this paper, we present a technique for synthesizing virtual humans after capturing a 360-degree panorama of a remote environment, and analyze the remote environment to identify the location where it can be captured without error, and apply a method of synthesizing virtual humans. According to this paper, it is possible to provide various captured spaces such as industrial plants, medical facilities, and schools as remote communication media.