• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.243-254
• /
• 2019

In this study, problems of the waterproofing methods in which water leakage occurs in the upper slab of the underground parking lot of apartment houses and the requirements considering the characteristics of the upper slab, and selected the appropriate performance(proposal) for the composite polyurea process are reviewed. As a result of the study, it is necessary to review performance such as responsiveness to upper slab of the multi-unit underground parking lot that is comprised of (1) crack and behavior responsiveness, (2) surface integrity, (3) vertical watertight stability, (4) pressure layer construction, (5) impact and pressure response and (6) vehicle moving load. As a result of evaluating 5 items corresponding to the requirements for the soft and hard complex polyurea, all of them were found to meet the conditions, and each materials were improved by compounding the materials that had problems when applying a single-ply method, thereby clarifying the advantages and disadvantages of the material property. However, in order to apply to the actual site, additional evaluation on site applicability such as mock-up evaluation should be conducted, and subsequent studies on the applicability of the market through review of economic feasibility and maintenance is required.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.6
• /
• pp.63-69
• /
• 2018

The machine learning model can capture the dynamics of building systems with less inputs than the first principle based simulation model. The training data for developing a machine learning model are usually selected in a heuristic manner. In this study, the authors developed a machine learning model which can describe supply air temperature from an AHU in a real office building. For rational reduction of the training data, the progressive sampling method was used. It is found that even though the progressive sampling requires far less training data (n=60) than the offline regular sampling (n=1,799), the MBEs of both models are similar (2.6% vs. 5.4%). In addition, for the update of the machine learning model, the normalized mutual information (NMI) was applied. If the NMI between the simulation output and the measured data is less than 0.2, the model has to be updated. By the use of the NMI, the model can perform better prediction ($5.4%{\rightarrow}1.3%$).

• Journal of Environmental Health Sciences
• /
• v.44 no.6
• /
• pp.524-538
• /
• 2018

Objective: This study aimed to identify the size distributions of particulate matter emitted during 3D printing according to operational conditions and estimate particle inhalation exposure doses at each respiratory region. Methods: Four types of printing filaments were selected: acrylonitrile-butadiene-styrene (ABS), polylactic acid (PLA), Laywood, and nylon. A fused deposition modeling (FDM) 3D printer was used for printing. Airborne particles between 10 nm and $10{\mu}m$ were measured before, during, and after printing using real-time monitors under extruder temperatures from 215 to $290^{\circ}C$. Inhalation exposures, including inhaled and deposited doses at the respiratory regions, were estimated using a mathematical model. Results: Nanoparticles dominated among the particles emitted during printing, and more particles were emitted with higher temperatures for all materials. Under all temperature conditions, the Laywood emitted the highest particle concentration, followed by ABS, PLA, and nylon. The particle concentration peaked for the initial 10 to 20 minutes after starting operations and gradually decreased with elapsed time. Nanoparticles accounted for a large proportion of the total inhaled particles in terms of number, and about a half of the inhaled nanoparticles were estimated to be deposited in the alveolar region. In the case of the mass of inhaled and deposited dose, particles between 0.1 and $1.0{\mu}m$ made up a large proportion. Conclusion: The number of consumers using 3D printers is expected to expand, but hazardous emissions such as thermal byproducts from 3D printing are still unclear. Further studies should be conducted and appropriate control strategies considered in order to minimize human exposure.

• Journal of Conservation Science
• /
• v.36 no.6
• /
• pp.456-474
• /
• 2020

This study investigated the initial behavior (flowability and setting properties) and shrinkage characteristics of lime mortar, based on the mixing ratio of hydrated lime (lump, powder) and commercial lime, which is primarily used for repairing and restoring cultural assets. The flowability showed that the optimum mixing water contents of the masonry lime mortar were 8-10% for the lump hydrated lime, 10-18% for the powdered hydrated lime, and 17-40% for the commercial hydrated lime. The results of the setting and shrinkage analysis showed that the average final setting time ratio compared to the standard of cultural asset repair was in the increasing order of commercial hydrated lime(0.4) < powder hydrated lime(5.6) < lump hydrated lime(5.7). Moreover, the average shrinkage ratio was ordered as lump hydrated lime(1.1) < powder hydrated lime(1.2) < commercial hydrated lime(3.0). The analysis of the physical and chemical characteristics of hydrated lime showed that the optimum mixing water content was reduced as the particle size of the lime increased, thus delaying the setting time and decreasing the length change rate (shrinkage). These results are expected to contribute to the prediction of the initial behavior and shrinkage characteristics of mortars using handmade and commercial lime during repair and restoration work on cultural, heritage buildings.

• Resources Recycling
• /
• v.30 no.4
• /
• pp.35-45
• /
• 2021

The humidity-control function and manufacturing characteristics of wood-wool boards using waste-paper-mulberry fiber were analyzed in this study. For the manufacture of wood-wool boards, the pulverizing times of waste-paper-mulberry fibers were controlled at 30, 60, 120, and 180 s, and the mixing amounts were controlled by adding 0%, 3%, 6%, and 9%, respectively, as compared to cement. Analysis of the moisture adsorption and desorption characteristics of the wood-wool boards controlled for pulverizing time revealed that the wood-wool board with 60 s of pulverized fiber exhibited the best adsorption and desorption performances. It was estimated that the adsorption and desorption performances of the material itself were adequate even when the boards were mixed because of minimal damage to the fiber. In addition, an analysis of the absorption and desorption characteristics of the fiber-mixture-controlled wood-wool boards showed that the 6%-mixed wood-wool board had the best absorption and desorption performances of 291.00 g/m² and 108.75 g/m², respectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.393-393
• /
• 2023

최근 기후변화에 대한 관심이 높아짐에 따라 전 세계적으로 미래 기후변화 예측 전망에 대한 다양한 연구들이 수행되었으며, 특히 IPCC(Intergovernmental Panel on Climate Change)의 기후변화 6차 보고서에 채택된 SSP(Shared Socio-economic Pathway) 시나리오를 이용한 연구가 활발한 상황이다. 이들 연구에서는 미래 기후변화의 양상 비교를 위한 기간 구분은 통상적으로 F1(2011-2040), F2(2041-2070), F3(2071-2100)으로 구성된다. 하지만 이는 단순하게 동일한 기간으로 나누어 설정한 것으로, 통계적 근거가 부족할 뿐만 아니라 변화 추이를 확인하기 위한 수단으로 사용하기에 부족할 수 있다는 한계점이 존재한다. 이 연구에서는 기후변화 패턴에 대한 기존 연구의 한계, 특히 미래 기후변화를 비교하기 위해 사용되는 기간 분류와 관련하여 한계점을 보완하고자 한다. SSP 시나리오 모델 중 UKESM1 모델을 활용하여 ASOS(Automated Synoptic Observation System) 기상관측소 기준 59개 지점에서 추출한 강수량 데이터를 분석하였다. 이후, 기후변화 비교를 위한 최적의 분류를 결정하기 위해 장마철인 6월부터 9월까지의 강수 데이터에 대해 통계분석 및 Pettitt 검정을 수행해 최적 기간을 산정하였다. 이를 통해 기존의 F1, F2, F3 분류 방식과 통계분석을 통해 도출한 최적 시기의 유출 특성 분석결과의 변화양상을 비교하였으며, 각 방법에 대한 비교를 통해 기후변화 추이에 대한 이해를 제공할 수 있을 것으로 판단하였다. 결과적으로 이 연구는 기후변화 시나리오를 활용하는 연구 수행 시 기간 구분에 대한 발전된 접근 방식을 제시하고자 한다.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.2
• /
• pp.62-85
• /
• 2009

The Nam-Hae Sin-sa, the South Sea shrine in Yeong-Am, Korea was a national institution for public peace and bliss, was excavated in 2000, and the shrine and the 3-way-gate were reconstructed in 2001. Hae Sin-sa, the Sea shrine is a place for religious service separated into the Nam-Hae Sin-sa, the Dong-Hae Myo, and the Seo-Hae Dan. The Dong-Hae Myo was reconstructed, but restored shrine and 3-way-gate of the Nam-Hae Sin-sa is not perfect in comparison with excavation plan in 2000, therefore new reconstruction was researched through the related literature, the analysis of historical maps and excavation results, the interview with the concerned people and the case study. This research defines the analysis of the Plan of the Nam-Hae Sin-sa Reconstruction as follows. 1. The Nam-Hae Sin-sa was the institution for religious service operated by national direct management, represents the shrine for public peace and bliss on the Mountain, the Sea, and the River. Especially the Nam-Hae Sin-sa had an important position on the pivot of international trade with China and Japan, and had a role of main shrine with another one in the Mt. Ji-ri San. 2. The name of the Sea shrine was called as Nam-Hae Sin-sa(the South Sea shrine), Dong-Hae Myo(the East Sea shrine), Seo-Hae Dan(the West Sea shrine). But the name of the South Sea shrine had changed in the early period of Chosun as Nam-Hae Sin-sa to the later Chosun as Nam-Hae Dang through the research of related literature and historical map. Such as the Seo-Hae Dan, it was constructed for the Dan, the flat raised-floor without buildings, and changed to the type of Sa-Dang with addition of buildings. 3. The historical map of Hae Sin-sa informs the types of the roof, the Mat-bae roof was used in the Dong-Hae Myo, but the Pal-jak roof was showed in the Seo-Hae Dan and the Nam-Hae Sin-sa. 4. According to the analysis of Yong-Ch'uck the unit length, Nam-Hae Sin-sa was reconstructed in the period of Koryo on large scale, but it was restored in the Chosun on middle scale. And the Unit of Yong Ch'uck was changed into Yeong-jo Ch'uck in the period of Chosun. 5. As the results, The Plan of the Nam-Hae Sin-sa Reconstruction designed the new shrine into the 3 Kan front and the 2 Kan side with 3:2 scale. An-ch'o-gong with Yong-du and Yong Mi the ornaments represents head and tail of dragon, the Un-gong and the ornament of Pa-ryun-dae-gong in the building, and the Ch'ung-ryang of the Yong-du show the image of the institution for religious service for the god of the sea who look like dragon. The inner gate building and the main entrance were designed as same plan and scale as Hyang-gyo, the Korean Traditional School and Shrine of Confucianism, on the basis of results of excavation. Raise the 3-tall gate of the main entrance with harmony of the scale and the shape, because the side of gate building has the Mat-bae roof. 6. This research shows that Plan of the Nam-Hae Sin-sa Reconstruction is composed into shrine space and reservation space from the main entrance to inner gate and shrine like Jung-ak Dan in the Mt. Gye-ryong San, and it also informs the well in the west side of Sin-sa is an important factor of the plan of shrine architecture.

• Journal of Industrial Technology
• /
• v.31 no.A
• /
• pp.53-57
• /
• 2011

Recently due to dramatically increasing demand of liquid crystal display (LCD) panel in IT industry, the used LCD panel glass has been wasted from electronic items, and also panel glass of poor quality during manufacturing process. The wasted LCD panel glass was crushed in the range of 0.42 to 2mm and evaluated for its usefulness as a aggregate in production of cement concrete brick. Cement concrete specimens with various mixing ratios of weathered granite soil, LCD panel glass and cement were cured in wetness for 7 days at $40^{\circ}C$ and then tested for uniaxial comprehensive strength (UCS)(KS F 4004 method). Specimen with a mixing ratio, 1:6:3, of weathered granite, LCD panel glass and cement, respectively, showed the highest average in the UCS test($26.51N/mm^2$). It is much higher than that of commercial brick without glass($17.00N/mm^2$). Conclusively waste LCD panel glass can be reutilized economically as a raw building material of good quality.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.4
• /
• pp.86-95
• /
• 2019

Recently, the applications of carbon fiber have been broader than ever when it comes to such industrials as automobiles, ships, aerospace, civil engineering and architecture because of their lightweight-ness and high mechanical properties. This study analyzed mechanical properties and flexural behavior of carbon fiber reinforced cement composites(CFRC) with different fiber contents and fiber lengths, and also impact resistance by natural drop test on mortar specimens was compared and examined. In addition, contents of carbon fiber(CF) were varied by 0.5%, 1.0%, 2.0% and 3.0%. Fiber lengths was used for 6 mm and 12 mm, respectively. As a result of the test, the flow value was very disadvantageous in terms of fluidity due to the carbon fiber ball phenomenon, and the unit weight was slightly reduced. In particular, the compressive strength was decreased with increasing carbon fiber contents. On the other hand, the flexural strength was the highest with 12 mm fiber length and 2% fiber content. As the results of the impact resistance test, the specimens of plain mortar takes about 2~3 times to final fracture, while the specimens of CFRC is somewhat different depending on the increase of the fiber contents. However, when the fiber length is 12 mm and the fiber content is 2%, the impact resistance was the highest.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.7
• /
• pp.109-117
• /
• 2019

Recently, child safety map making education has attracted attention as a way to reduce crimes against children. In Korea, the Ministry of Gender Equality and Family organized a child safety map making education program in 2011. The program's manual was revised in 2013 and the Ministry implemented it as a project to promote the rights of women and children. Child safety map making education aims to raise a child's understanding of their neighborhood, to have voluntary control and normal consciousness as a local inhabitant, to be aware of wrong behavior and crime, and to be part of creating a safe urban environment. However, when compared to educational programs in other major developed countries, the child safety map making education program in Korea currently does not improve a child's awareness of their surroundings. In this workshop study, we proposed and ran a new program to improve children's awareness of their environment based on the active participation of children in the existing safety map educational program. The workshop was held for 4 weeks for 48 students from 5th and 6th grade at Osan Daeho Elementary School. We analyzed this new program's effects with the following results. First, an analysis of the effects of the program on children's recognition of safe and dangerous spaces revealed that their understanding of these spaces increased by 30.4% after the workshop. The safety-related factor in the mind map key concept increased from 0.94 to 4.94, indicating that the children's perception of neighborhood risk and safety factors improved. Second, the analysis of the effects of the program on the children's coping ability in dangerous situations showed that their understanding of how to deal with dangerous situations increased by 11.3%. The children's understanding of facilities they could ask for help, such as police boxes and child safety guard houses, improved by 17.9%. Third, analysis of the effects of child safety map making education on children's understanding of their neighborhood, their perception of responsibility in the neighborhood, and their neighborhood attachment showed that these levels of children's understanding of the neighborhood improved by 6.0% after the workshop.