• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.747-752
• /
• 2009

In this paper, the MIMO(Multi-Input Multi-Output) channel characteristics for Rx antenna spacing are described in the real environment, which has LOS(Ling of Sight) and NLOS (Won-Line of Sight). We developed $2\times2$ MIMO channel measurement system at 2.3GHz Wibro Band. MIMO antenna evaluation parameters such as received power, channel capacity and spatial correlation are evaluated for standard dipole antenna with 0.25, 0.5, 0.75 and 1.0 wavelength spacing at 2-position for LOS and 4-position for NLOS. The spatial correlation is distributed more than 0.9 in most LOS case which might be intricate to operate MIMO communication. MIMO antenna design need to be focused on getting spatial diversity and reducing spatial correlation in LOS case.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.10-15
• /
• 2017

Research interest has strongly focused on developing a method for effectively transmitting bio-signals over a distance using a wireless wearable device. In this paper, we describe a procedure for the design and fabrication of a wearable antenna based on embroidering conductive threads to clothing capable of transmitting electrocardiogram signals. 3D electromagnetic simulation software and embroidery software were used to design and fabricate the conductive thread-based antenna, respectively. The measurement results show that the reflection coefficient of the fabricated antenna prototype exhibits excellent antenna impedance matching characteristics of less than -10dB in the Zigbee 2.4GHz frequency band. We also verified that the electrocardiogram data could be effectively received and monitored in real-time by a receiver 220m away from the transmitter.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.339-345
• /
• 2016

This paper presents a two-stage power amplifier MMIC using a $0.4{\mu}m$ GaN-HEMT process. The two-stage structure provides high gain and compact circuit size using an integrated inter-stage matching network. The size and loss of the inter-stage matching network can be reduced by including bond wires as part of the matching network. The two-stage power amplifier MMIC was fabricated with a chip size of $2.0{\times}1.9mm^2$ and was mounted on a $4{\times}4$ QFN carrier for evaluation. Using a downlink LTE signal with a PAPR of 6.5 dB and a channel bandwidth of 10 MHz for the 2.6 GHz band, the power amplifier MMIC exhibited a gain of 30 dB, a drain efficiency of 32%, and an ACLR of -31.4 dBc at an average output power of 36 dBm. Using two power amplifier MMICs for the carrier and peaking amplifiers, a Doherty power amplifier was designed and implemented. At a 6 dB back-off output power level of 39 dBm, a gain of 24.7 dB and a drain efficiency of 43.5% were achieved.

• Korean Journal of Remote Sensing
• /
• v.28 no.2
• /
• pp.237-243
• /
• 2012

In this paper, an atmospheric effect of repetitive measurements of X-band (9.65 GHz) arc-rail type GB-SAR (ArcSAR) system was quantitatively analyzed. Four artificial triangular trihedral corner reflectors as stationary targets for getting stable back scattered signal during 43 hours continually. The results of the analysis showed that the phase of those stationary targets had changed maximum of 5 radian (12.4 mm) and total RMS error had was 1.62 radian (4 mm) during 65 repeated measuring time. The refractive index of air which was calculated using the temperature;humidity and pressure of atmosphere showed very close relationship with the phase difference. We could check the atmospheric correction was fulfilled by the correction of an atmospheric effect using refractive index during the selected 16 hours period showed that RMS error was dropped from 1.74 radian (4.3 mm) to 0.10 radian (0.24 mm).

• Korean Journal of Remote Sensing
• /
• v.23 no.6
• /
• pp.501-506
• /
• 2007

Basic research is conducted to identify a target using corner reflectors which are commonly used in calibration of synthetic aperture radar (SAR) systems. At first, an omni-directional reflector is fabricated by combining four 15-cm rectangular trihedral corner reflectors. Then, its radar cross section (RCS) characteristics are measured at C-band (5.3 GHz) for vv-, hh-, hv-, and vh- polarizations at a range of horizontal angle, $-90^{\circ}{\le}{\phi}{\le}90^{\circ}$. The measured RCS angular variation of the omni-directional reflector is much smaller for vv-polarization than other polarizations, and the difference between the maximum and minimum RCSs for vv-polarization is about 8 dB. Peak RCS values are shown at $0^{\circ}$ (normal to plates) and $45^{\circ}$ (direction of bore sight). It is shown that the measurements agree quite well with numerical simulation and theoretical computation results.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.155-160
• /
• 2021

In this paper, we investigated the aptness of embroidered textile dipole antenna as a wearable antenna. We designed an 2.45GHz ISM band embroidered textile dipole antenna on polyester textile. We investigated its characteristics depends on 3 variables, thickness of textile(ttextile), distance between textile and surface of body(gbody) and conductance of surface of body(𝜎body). Thickness of textile(ttextile) was affecting on the antenna resonance frequency(fo). As the conductance of surface of body(𝜎body) was increased the antenna resonance frequency(fo) and the antenna gain were increased slightly. The increment of the distance between textile and surface of body(gbody) caused relatively large increment of the antenna resonance frequency(fo) and the antenna gain. From the results, in the case of designing an embroidered textile dipole antenna as a wearable antenna we should consider carefully the two variables, distance between textile and surface of body(gbody) and thickness of textile(ttextile). Due to its large variation, the distance between textile and surface of body(gbody) may be a technical barrier in designing embroidered textile dipole antenna.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1175-1182
• /
• 2021

The receiver of each radio telescope of KVN, has a sampler that converts astronomical radio signal to digital data. The ability of this sampler (the bandwidth, sampling frequency, and sampling bits) is improved by sqrt(n), if the bandwidth is increased by n times, and the number of observable objects increases exponentially in the case of continum spectrum radio sources. As the bandwidth increases, there are the more spectrum lines that can be simultaneously monitored in the radio source. This will greatly expand the research area in astronomical radio observation. For this reason, we are trying to independently develop the technology of the fast digital sampler. Therefore, based on the research experience and technology accumulated so far, An ability of sampling up to 3.5 GHz, that can vary the sampling frequency and can observe in a wider band, was designed and made for proto-type. In this study, we introduce the development details and test results for new sampling system.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.2
• /
• pp.38-47
• /
• 1995

An X-band highly frequency-stabilized MIC Gunn oscillator using a dielectric resonator is fabricated. Resonant frequency is obrained by a variational method and it is studied how the oscillating characteristics can be affected by several fators. By the optimizing these factors, we can realize the stabilited oscillator output of 250 mW with 5-7 percet efficiency at 10 GHz. It has the favorable characteristics with frequency variation of 70 KHz/$^[\circ}C$ and the ouput variation within 3 dB over the temperature range from 0 to 70$^[\circ}C$.

• Journal of Biosystems Engineering
• /
• v.24 no.3
• /
• pp.235-242
• /
• 1999

This study was conducted to develop a grain moisture meter using microwave free space transmission technique at X-band frequency. The 10.5GHz microwave oscillator using a dielectric resonator was designed and fabricated to transmit electromagnetic wave through standard horn antenna to a sample holder with the wetted Hwasung and Chuchung rough rice(12.00∼26.25%). To detect the output voltage of transmitted wave from receiving horn antenna, the detector was composed of shottkey diode and RF impedance matching circuit. The regression model for measurement of grain moisture content was developed. Its correlation coefficient and standard error of prediction (SEP) were found to be 0.9882 and 0.657 respectively between measure and predicted moisture contents.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.3
• /
• pp.116-122
• /
• 2006

A fast scan digital-IF FFT receiver at the radio communication band is presented for spectrum monitoring applications. It is composed of three parts: RF front-end, fast LO board, and signal processing board. It has about 19GHz/s scan rate, multi frequency resolution from 10kHz to 2.5kHz, and high sensitivity of below -99dBm. The design and performance analysis of the digital-IF FFT receiver are presented.