• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.3
• /
• pp.957-962
• /
• 2012

Objective: Rapidly increasing colorectal cancer (CRC) incidence in Malaysia and the introduction of cutting edge new treatments, which prolong survival, mean that treatment outcome measures meed to be evaluated, including consideration of patient's quality of life (QoL) assessment. There are limited data on QoL in CRC patients, especially in Malaysia. Therefore, this study was performed focusing on cancer stages and age groups. Methods: The cross sectional study was conducted from June to September 2011 at three public tertiary hospitals with the EORTC QLQ C-30 questionnaire in addition to face to face interview and review of medical records of 100 respondents. Results: The mean age was 57.3 (SD 11.9) years with 56.0% are males and 44.0% females, 62% of Malay ethnicity, 30% Chinese, 7% Indian and 1% Sikh. Majority were educated up to secondary level (42%) and 90% respondents had CRC stages III and IV. Mean global health status (GHS) score was 79.1 (SD 21.4). Mean scores for functional status (physical, emotional, role, cognitive, social) rangeds between 79.5 (SD 26.6) to 92.2 (SD 13.7). Mean symptom scores (fatigue, pain, nausea/vomiting, constipation, diarrhea, insomnia, dyspnoea, loss of appetite) ranged between 4.00 (SD 8.58) to 20.7 (SD 30.6). Respondents role function significantly deteriorates with increasing stage of the disease (p=0.044). Females had worse symptoms of pain (p=0.022), fatigue (p=0.031) and dyspnoea (p=0.031). Mean insomnia (p=0.006) and diarrhea (p=0.024) demonstrated significant differences between age groups. Conclusion: QOL in CRC patients in this study was comparable to that in other studies done in developed countries. Pain, fatigue and dyspnoea are worse among female CRC patients. Given that functions deteriorates with advanced stage of the disease at diagnosis, a systematic screening programme to detect cases as early as possible is essential nationwide.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.4
• /
• pp.427-435
• /
• 1984

Alfalfa field was established to investigate seasonal changes of nodule activity and contents of carbohydrates, and nitrogen, and also to examine their relationships in alfalfa (Medicago sativa L.). Periodical sampling of alfalfa in cutting and uncutting plots was collected to measure growth of plants, development and activity of nodule, and content of carbohydrates and nitrogen in the third year following year of establishment. Nodule activity of alfalfa root appeared to early April, increased to a maximum in beginning of June (flowering stage), and then decreased and generally remained low from late-July to mid-August, and again increased from early September, and then decreased and generally remained low for the rest of growing season. After flowering, nodule weight tended to decrease slowly throughout the growing season. Until flowering stage, increase of dry weight was closely related with that of nodule activity. But after flowering the curve pattern of dry weight did not fit to that of nodule activity due to decrease of supply of assimilate to nodule, drought, and high temperature. Total nonstructural carbohydrates in roots were closely correlated with nodule weight and nodule activity. While, nitrogen contents in leaves were closely correlated with nodule weight and nodule activity. Also cutting on July prevented unnessesary losses of respiration during summer to provide rapid recovery of nodule activity.

• Journal of Korea Foundry Society
• /
• v.20 no.5
• /
• pp.330-335
• /
• 2000

Functional metal prototypes are often required in numerous industrial applications. These components are typically needed in the early stage of a project to determine form, fit and function. Recent R/P(Rapid Prototyping) part are made of soft materials such as plastics, wax, paper, these master models cannot be employed durable test in real harsh working environment. Parts by direct metal rapid tooling method, such as laser sintering, by now are hard to get net shape, pores of the green parts of powder casting method must be infiltrated to get proper strength as tool, and new type of 3D direct tooling system combining fabrication welding arc and cutting process is reported. But a system which can build directly 3D parts of high performance functional material as metal park would get long period of system development, massive investment and other serious obstacles, such as patent. In this paper, through the rapid tooling process as silicon rubber molding using R/P master model, and fabricate wax pattern in that silicon rubber mold using vacuum casting method, then we translated the wax patterns to numerous metal tool prototypes by new investment casting process combined conventional investment casting with rapid prototyping & rapid tooling process. With this wax-injection-mold-free investment casting, we developed new investment casting process of fabricating numerous functional metal prototypes from one master model, combined 3-D CAD, R/P and conventional investment casting and tried to expect net shape measuring total dimension shrinkage from R/P pare to metal part.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.2
• /
• pp.107-112
• /
• 2011

This experiment was carried out to provide some information on the change of dry matter productivity and feed value (forage quality) according to growth stages of late-maturing variety, Hwasan 101, Italian ryegrass (Lolium multiflorum Lam.) in Grassland and Forages Division, National Institute of Animal Science, RDA, Suwon from 2000 to 2002. In Suwon, booting, first heading, full heading and flowering stages of cv. Hwasan 101 were May 8, 18, 28 and June 3, respectively. Dry matter (DM) and total digestible nutrients (TDN) yields of Hwasan 101 were tendency to be increased by the progress of growth. DM yield in first heading stage increased 50% more than DM 4,818 kg/ha of booting stage, and also DM yield in full heading stage was increased by 26% of DM 7,244 kg/ha of first heading. Crude protein content was decreased gradually by the progress of growth, which were 18.32, 15.12, 12.58 and 12.36% in booting, first heading, full heading and flowing stage, respectively. Acid detergent fiber and neutral detergent fiber contents was increased and in vitro dry matter digestibility decreased gradually with progress of growth, but there was no difference between full heading and flowering stages. Considering DM yield and feed value of Italian ryegrass, the suitable cutting times seems between full heading and flowering stage.

• Journal of the Korean Society of Costume
• /
• v.38
• /
• pp.289-304
• /
• 1998

In Korean clothing industry, most of the manufactures produce garments by subcon-tractors partially or entirely. It is very often that the design part is remote from production part and there is miscommunication between these two parts resulting dissatisfaction to both. Therefore it is very important to communicate the manufacturing information clearly and quickly to produce garments exactly the design part intended. Also to automate the clothing out how to produce and use the information objectively and efficiently. As a first step of moving to automation, the purpose of the research is to find out how manufacturing information and data are communicated in clothing manufacturing at present. In order to follow the information flow of a cer-tain manufacturer, the case study method was used. The case study samples were 12 clothing firms of 13 brands. The results and suggestions are as follows :- 1. A manufacturing information is communicated through paper documents such as“Production Order”, sample and patterns. At present, a production order sheet is the most efficient communication media, which comprises most of the information being communicated. 2. A manufacturing information comprises control information on the product, design in-formation, pattern information, cutting information, material information, sewing information, production schedule information, quality control information, costing information and information about the subcontractors. 3. A manufacturing is not quite objective except pattern information and cutting information which is presented by CAD systems. The communication of design information and sewing information should be somehow more objective. 4. There is not much information from a subcontractor. Considering that a subcontractor is the other partener of the communication, more information from the subcontractor is required for both benefit. 5. A designer produce most of the manufacturing information, but the information is communicated through a production manager to the subcontractor. The difference between the information maker and information communicator can cause any miscommunication. In future automated manufacturing, it will be possible for the designer to communicate to the manufacturer directly from the early stage of designing.

• Journal of Animal Science and Technology
• /
• v.63 no.4
• /
• pp.799-814
• /
• 2021

Information is lacking about the effect of date of a fall cut of alfalfa (Medicago sativa L.) on dry matter yield (DMY), forage nutritive value, and stands persistence. The objective of this study was to determine the effect of timing of a fall cut on DMY, forage nutritive value and stand persistence of three alfalfa varieties: low-lignin Hi-Gest 360, Roundup Ready Tonica, and conventional Gunner in Northeastern Kansas in the United States. The field study was carried out by splitting plot in randomized complete block design with four replications. The harvesting data of different maturity stages were collected in each year from 2015 to 2018. Three cuts were harvested based on the stage of maturity, and the last (fourth) cut was done on September 15, September 30, October 15, and October 30 of each year. The persistence of the alfalfa stands was determined each fall after the last cut, and each spring after the first cut, by counting the number of live plants in a randomly placed quadrat in each plot. Alfalfa cut on September 15 and September 30 had a higher stand persistence compared to alfalfa cut on October 15 and October 30. The DMY of the first cut in 2016 was significantly higher in roundup ready than the low-lignin alfalfa variety. In the second cut, DMY was significantly higher in conventional alfalfa than the roundup ready. There were no significant differences in DMY between alfalfa varieties in the rest of seasonal cuttings in 2016 and 2017 and annual total yield in both years. In general, low lignin alfalfa variety had higher crude protein and relative feed value and lower acid detergent fiber and neutral detergent fiber contents than those in roundup ready and conventional alfalfa varieties. On average, nutritive value of alfalfa was generally affected by last cutting dates in 2017. Based on 3-year data the last cutting of alfalfa in the fall could be done by September 30-October 15 without harmful effect on DMY.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.4
• /
• pp.372-376
• /
• 1992

This experiment was conducted to determine hay making time on the drying period, hay moisture content, hay loss content, yield and forage quality of Italian ryegrass in paddy field. Plant height increased rapidly from middle of April, and leaf weight rate were 55.6% at April 20 and 18.9% at May 30. Moisture content and loss content of hay were 17.1-20.5% and 10.2-15.0%, respectively, at drying for 4 days from May 10 to May 30. As the growth stage later, crude protein, fat and ash contents reduced, but crude fiber and NFE contents increased. Dry matter and TDN yield at the cutting of May 20 and May 30 increased to 17-18% and 5-11%, respectively, than those of April 20＋May 30.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.8
• /
• pp.991-1005
• /
• 2011

This study researches the historical production, process, and design method for 3 pairs of corsets in $18^{th}$ century France. In the analytical stage of historical materials, it grasped the kind, form, origin, and change in style through a lexical definition of relevant terms. Through a precedent study on Garsault's 'L'art du tailleur', preservation costume, and historical reconstruction of pattern in preservation costume, it confirmed corps size, silhouette, pattern form, and material for historical production. The sewing method and the producing sequence were analyzed. In the production stage, 3 selective models in corps plein baleine, corps demi-baleine, and corset were historically produced. With neckline of forming broad Letter U, the bust part is covered roundly. The bodice was composed of 10 panels based on the corps form in the mid-$18^{th}$ century of following a curve of a human body. A shoulder strap was allowed to make the arm movement comfortable by producing and attaching it separately. The cutting line except the center in the front and the back of vertical line was distributed according to the natural flow of a form and movement of the human body. The curve-based pattern line was confirmed.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.1
• /
• pp.33-39
• /
• 1988

Insufficient herbage during the fall in the temperate areas of the world has been a serious limitation in animal production, but leafy brassicae are potentially very useful for extending the grazing season when the growth and quality of grass is poor. This study was conducted to determine the effects of cutting stage and N fertilization on dry matter (DM) yield, forage quality and chemical composition of forage rape (Brassica napus Subsp. oleifera). The experiment was conducted in the Experimental Livestock Farm of Seoul Nat'l Univ., at Suweon, during 1985- 1986. The results obtained are summarized as follows: 1. DM percentage and yield significantly increased as the growth period was prolonged and decreased as the N fertilization increased, but in-vitro dry matter digestibility (IVDMD) was unaffected by the treatments. 2. Plant height, DM yield and $NO_3$-N content significantly increased as the rate of N fertilization increased and DM percentage decreased, but the IVDMD was unaffected. 3. The forage rape had high percentage of crude protein and ash. Glutamic acid, pro!ine and aspartic acid were the major amino acids. Concentration of P, Ca and Mg were high.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.3
• /
• pp.125-130
• /
• 2017

In this study, the influence of various factors on surface roughness was investigated using the Taguchi experimental method through high-speed machining processing. Feed rate, pitch, tool diameter, and depth of cut are widely applied to high-speed machining conditions for mold production. Each of these factors was implemented and classified into three levels; then, after high speed machining, surface roughness was measured, the S/N ratio was analyzed, and the influence on the surface roughness of control factors was analyzed quantitatively by ANOVA. Using this information, a mathematical model for predicting surface roughness was derived from multiple regression analysis. This mathematical model enables the surface roughness value after high-speed machining to be predicted at the production stage, before machining, for a wide range of machining conditions.