• Journal of Environmental Science International
• /
• v.16 no.6
• /
• pp.689-698
• /
• 2007

Mesoporous silicas for heavy metals adsorption were prepared by co-condensation of surfactant as a template and Ludox HS-40 as a silica precursor. Various mesoporous silicas with the introduction of chelating ligands (mercaptopropyl and aminopropyl groups) were synthesized to remove heavy metal ions from aqueous solutions. The surface modification was conducted with a co-condensation process using the sequential or simultaneous addition of mesoporous silica and high concentration of the organosilane(3-mercaptopropyltrimethoxysilane and 3-aminopropyltriethoxysilane). These materials have been characterized by elemental analysis, XRD, SEM and TEM analysis. Adsorbents synthesized with 3-mercaptopropyltrimethoxysilane and 3-aminopropyltriethoxysilane shows a high loading capacity for Hg(II), Pb(II), Cd(II) and anion Cr(VI). Especially the one synthesized with a mercaptopropyl function has the highest adsorption capacity for Hg(II) and Cd(II).

• Journal of the Korean Chemical Society
• /
• v.57 no.3
• /
• pp.411-415
• /
• 2013

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2010.03a
• /
• pp.41-42
• /
• 2010

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.03a
• /
• pp.110-111
• /
• 2009

A solution containing 3-Mercaptopropyltr-imethoxysilane(MPTMS) was employed to modify surface of cotton fabrics with a silver colloid. Silver nanoparticles were applied on cotton fabrics via treatment with 3-MPTMS. The rate of silver nanoparticles on the fabric surface were measured with Energy Dispersive Spectroscopy(EDS). EDS results confirm the silver atom on the cotton surface.

• Textile Coloration and Finishing
• /
• v.30 no.4
• /
• pp.245-255
• /
• 2018

In this study, cotton fabrics were coated with $TiO_2$ nanoparticles using 3-mercaptopropyltrimethoxysilane(3-MPTMS), which is highly reactive to cotton fabrics, as a medium, and the characteristics, antimicrobial properties, and photodegradation properties of the fibers were measured. The manufacturing process is as follows. (1) 3-MPTMS was added to isopropanol, and $TiO_2$ colloid was added to the mixture to prepare a solution. (2) Cellulose fibers were immersed in the prepared $3-MPTMS/TiO_2$ solution, stirred for 90 minutes at $45^{\circ}C$ in a constant temperature water bath, and dried thereafter. In order to identify the morphology of the cellulose fibers coated with $TiO_2$ nanoparticles, the surface was observed with a scanning electron microscope(SEM), and SEM-EDS was measured to identify the adhesion of $TiO_2$ nanoparticles. The SEM images showed $TiO_2$ nanoparticle and 3-MPTMS coated layers on the fibers and it was identified that $TiO_2$ nanoparticles were attached to the cellulose fibers. The antimicrobial activity of $3-MPTMS/TiO_2$-treated cotton fabrics was measured using a bacterial reduction method. $3-MPTMS/TiO_2$ cellulose fibers which was irradiated by ultra violet light, showed antimicrobial activity against Escherichia coli(ATCC 43895) and Staphylococcus aureus(ATCCBAA-1707) unlike unirradiated fibers. The cellulose fibers were stained with methylene blue and the photodegradation performance of the stained fabrics was analyzed. The stained fabrics showed high degradation performance with photolytic reactions of $TiO_2$ nanoparticles.

• Elastomers and Composites
• /
• v.26 no.2
• /
• pp.115-122
• /
• 1991

Polychloroprene rubber was moisture-cured after treating them with silane coupling agents such as 3-mercaptopropyltrimethoxysilane(MPS), 3-methacryloxypropyltrimethoxysilane(MAS) and vinyltriethoxysilane(VES), especially MPS. The cure reaction is composed of two steps. The first is the reaction between chlorine atoms of CR and silane coupling agents. The second is the formation of cross-links which are siloxane linkage. The linkage is formed by the condensation of silanol groups which are produced by the hydrolysis of alkoxysilyl groups. The first reaction was kinetically studied and the reactivity of CR to silane coupling agents was determined in previous literature. Crosslinking density and mechanical properties of the moisture-cured elastomer filled with silica or non-filled were studied and the feasibility of this cure system was discussed.

• Elastomers and Composites
• /
• v.27 no.1
• /
• pp.20-26
• /
• 1992

Reactions between chlorinated or brominated poly(isobutylene-isoprene) (CIIR and BIIR, respectively) and 3-mercaptopropyltrimethoxysilane(MPS) were kinetically studied by gas chromatography in solution state. CIIR and BIIR were mixed with MPS and dibutyltin dilaurate as catalyst on roll mill and then the compounds were cured in hot water or atmosphere. From the gas chromatography, reaction order, activation energy, and frequency factor were determined. Crosslinking density and physical properties of moisture-cured CIIR and BIIR were measured. CIIR and BIIR were effectively moisture-cured and physical properties of these rubbers were comparatively good.

• Elastomers and Composites
• /
• v.25 no.4
• /
• pp.280-290
• /
• 1990

The effect of surface treatment of kaolinite with silane coupling agent on the reinforcement of SBR was investigated. The possibility of the practical use of kaolinite as an organic filler was also scrutinized and it was found that the reinforcement of SBR was improved by modifying surface of the cheap inactive inorganic filler with organic silane coupling agents. 3-Chloropropyltrimethoxysilane(C-series), 3-mercaptopropyltrimethoxysilane(M-series) and 3-aminopropyltriethoxysilane(A-series) were used as coupling agents. To test the material properties of vulcanized and unvulcanized SBR, Mooney viscosity, modulus, elongation and fractured surface measurements by SEM were carried out by changing the amount of silane coupling agents. Torqe of the unvulcanized SBR following the measurement of the degree of vulcanization was to be increased as the amount of silane was increasing, and Mooney viscosity of M-series and A-series was also increased.

• Journal of the Korean Chemical Society
• /
• v.60 no.5
• /
• pp.317-320
• /
• 2016

Efficient copper removal from water was achieved by using surface modified silica spheres with 3-mercaptopropyltrimethoxysilane (MPTMS) using base catalyst. The surface modification of silica spheres was performed by hydrolysis and condensation reactions of the MPTMS. The characteristic infrared absorption peaks at 2929, 1454, and 1343 cm⁻¹ represent the −CH₂ stretching vibration, asymmetric deformation, and deformation, respectively. The absorption peaks at 2580 and 693 cm⁻¹ corresponding the −SH stretching vibration and the C-S stretching vibration indicate the incorporation of MPTMS to the surface of silica spheres. Field emission scanning electron microscope (FESEM) image of the surface modified silica sphere (SMSS) shows nano-particles of MPTMS on the surface of silica spheres. High concentration of copper solution (1000 ppm) was used to test the copper removal efficiency and uptake capacity. The FESEM image of SMSS treated with the copper solution shows large number of copper lumps on the surface of SMSS. The copper concentration drastically decreased with increasing the amount of SMSS. The residual copper concentrations were analyzed using inductively coupled plasma mass spectrometer. The copper removal efficiency and uptake capacity with 1000 ppm of copper solution were 99.99 % and 125 mg/g, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.5
• /
• pp.458-461
• /
• 2004

In order to improve the adhesion properties of copper, MPS(3-mercaptopropyltrimethoxysilane) organic film were employed. The plasma pretreatment in pure He or $He/O_{2}$ mixed gas environment greatly increased adhesion force. Adhesion force was measured by scratch test with nano indenter. Microstructures and surface roughness were observed with scanning electron microscope(SEM). The characteristics of MPS layer for pretreatment were studied with flourier transform infrared spectroscope(FT-IR) and contact angle tester. The heighest adhesion was achieved in the specimen pretreated with mixed plasma and NPS coating, which was 56mN. Other specimen showed lower value by $20{\%}$ to $30{\%}$. The roughness of substrate was not affected by the bonding strength of copper plating.