• The korean journal of orthodontics
• /
• v.52 no.4
• /
• pp.287-297
• /
• 2022

Objective: To investigate the pattern of accuracy change in artificial intelligence-assisted landmark identification (LI) using a convolutional neural network (CNN) algorithm in serial lateral cephalograms (Lat-cephs) of Class III (C-III) patients who underwent two-jaw orthognathic surgery. Methods: A total of 3,188 Lat-cephs of C-III patients were allocated into the training and validation sets (3,004 Lat-cephs of 751 patients) and test set (184 Lat-cephs of 46 patients; subdivided into the genioplasty and non-genioplasty groups, n = 23 per group) for LI. Each C-III patient in the test set had four Lat-cephs: initial (T0), pre-surgery (T1, presence of orthodontic brackets [OBs]), post-surgery (T2, presence of OBs and surgical plates and screws [S-PS]), and debonding (T3, presence of S-PS and fixed retainers [FR]). After mean errors of 20 landmarks between human gold standard and the CNN model were calculated, statistical analysis was performed. Results: The total mean error was 1.17 mm without significant difference among the four time-points (T0, 1.20 mm; T1, 1.14 mm; T2, 1.18 mm; T3, 1.15 mm). In comparison of two time-points ([T0, T1] vs. [T2, T3]), ANS, A point, and B point showed an increase in error (p < 0.01, 0.05, 0.01, respectively), while Mx6D and Md6D showeda decrease in error (all p < 0.01). No difference in errors existed at B point, Pogonion, Menton, Md1C, and Md1R between the genioplasty and non-genioplasty groups. Conclusions: The CNN model can be used for LI in serial Lat-cephs despite the presence of OB, S-PS, FR, genioplasty, and bone remodeling.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.6
• /
• pp.566-574
• /
• 2006

Purpose : This study was performed to provide an anatomical information of the mandibular ramus for the successful inferior alveolar nerve block. Three dimensional images were reconstructed from the computerized tomography (CT) and the anatomical evaluation of the mandibular ramus was done. Materials and methods : Sixty-four patients who had been taken the facial CT scans from 2000, Jan to 2003, June was selected. The patients who had the anterior or posterior teeth misssing, edentulous ridge, and jaw fracture were excepted. In the occulusal plane, the lingual surface angle (LSA) between the mid-sagittal plane and the mandibular molar lingual surface from the 2nd premolar to the 2nd molar, the inner ramal surface angle (IRSA), the maximum inner ramal surface angle (MxIRSA), and the outer ramal surface angle (ORSA) to the-mid sagittal plane were measured. The inner ramal surface angle in the ligular tip level (IRSA-L) and the outer ramal surface angle in the ligular tip level (ORSA-L), the ramal length (RL), and the anterior ramal length (ARL) were also measured in the lingular tip level. Results : In the lingular tip level, the mean IRSA-L and ORSA-L were $28.6{\pm}6.3^{\circ}$ and $17.9{\pm}4.9^{\circ}$ respectively. The larger was the IRSA, the larger was the ORSA. In the lingular tip level, the mean ramal length was 35.8${\pm}$3.4 mm. The larger was the IRSA-L, the shorter was the ramal length. On the lingular tip level, the mean anterior ramal length from anterior ramus to lingular tip was 19.6${\pm}$3.3 mm. when the ramal length was longer, the anterior ramal length was also longer. On the lingular tip level, there was positive correlation vetween the IRSA and the ORSA, negative correlation between the IRSA and the ramal length, and positive correlation between the ramal length and the lingular tip level to the anterior ramus. There was no statistical meaning of data between sex and age. Conclusion : In the clinical view of the results so far achieved, if the direction of needle is closer to posterior it is able to contact bone on lingular tip when the internal surface of ramus is wided outer.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.1
• /
• pp.63-68
• /
• 1991

The author has arrived at the following result after having carried out multilateral study based on a total of 282 maxillofacial fracture patients who have receive treatment at the Euijeongbu general hospital and Shinchun general hospital in the northern district of Kyunggido from march 1988 to august 1990. 1. Sex distribution of Mx. facial fx. patient was higher in male by 4.6:1 and was predominant in the 3rd decade with 40.4% followed in decreasing order by the 2nd decade and the 4th. 2. A majority were in the Mn. with 40.2% followed in decreasing order by zygoma. nasal bone and maxilla. 3. For the sex distribution according to anatomy, make to female ratio was 6.2:1 in the mandible, followed in decreasing order by zygoma, and nasal bone with predominance in male. 4. Car accident with 42.8% was the most common cause of fx. followed in decreasing order by violence, workmen's accident, and fall down. 5. The involvement of other trauma areas are head. 79.0%, abdomen-thorax, and the extremities in decreasing order. 6. In the mandibular fx. a majority were in the symphysis with 73.9% followed in decreasing order by angle, Condyle, and body. 7. Maxillary fx. of the type LeFort II was estimated to be 41.2% 8. Fracture in the zygoma including zygomatic arch was estimated to be 72.5%

• The korean journal of orthodontics
• /
• v.29 no.3 s.74
• /
• pp.303-315
• /
• 1999

The aim of this study was to evaluate the morphology of the mandibular symphysis and anterior alveolar and skeletal relationship under the influence of the rotational growth pattern of mandible in skeletal Class III malocclusion. A total of U untreated adult subjects were divided into two groups-forward rotational growth pattern group, backward rotational growth pattern group-according to the suggestion of Skieller et al.. The antero-posterior position, vertical relationship, mandibular symphysis and anterior alveolar and skeletal relationship were assessed on lateral cephalometric radiographs. Mandibular symphysis and anterior alveolar and skeletal relationship in each subject were studied and the following conclusions were drawn : 1. Concerning the antero-posterior position, forward rotational growth pattern group showed significantly larger SNA, SNB. Conceming the vertical relationship, all measurements showed statistically significant differences. 2. Forward rotatioal growth pattern group showed significantly larger IMPA, MnAD, backward rotational growth pattern group showed significantly larger MxABH. 3. There was no statistically significant difference in symphysis ratio to mandibular plane between forward and backward rotational growth pattern group. 4. In the correlative analysis of rotational growth pattern of mandible and mandibular symphysis, anterior alveolar and skeletal relationship, statistically significant correlations in overbite, IMPA, MnAD, symphysis width were showed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3833-3838
• /
• 2009

This paper introduces a measurement system for mechanical properties of sport shoes using an industrial robot. The robot system used in this paper is a commercial Puma type robot system(FARA AT2 made by SAMSUNG Electronics) with 6 joints and the end-effector is modified to produce a human walking motion. After analyzing human walking with a high speed video camera, each joint angle of the robot system is extracted to be used in the robot system. By using this system, ground impact forces were measured during stepping motion with 3 different shoe specimens made of 3 different hardness outsoles, respectively. As other mechanical properties, both bending moments to bend the toe part of the same specimen shoes and pronation quantities during walking motion were measured as well. In the impact test with the same depth of deformation under the ground level, the effect of the outsole hardness was clearly appeared such that the harder outsole produces the higher ground reaction force. The bending test and the pronation test also show proportional increments in the bending stiffness and the moment Mx according to the outsole hardness. Throughout such experiments, the robot system has produced consistent results so that the system could be used in obtaining valuable informations for a shoe designing process.

• Journal of Veterinary Clinics
• /
• v.19 no.2
• /
• pp.186-190
• /
• 2002

This crossover study was performed in order to compare the effects of cetirizine, loratadine, and terfenadine in canine skin. Five healthy dogs were used. Cetirizine 0.5 mg/kg, loratadine 5 mg/kg and terfenadine 5 mg/kg were administered orally 4 hours before the experiment. Erythema indices and wheal size were assessed by Hexameter ($MX^{\circledR}$ 18, CK, Germany) and skin reaction guide, respectively. Cetirizine-induced erythema inhibition was generally higher than other drugs and was significantly different from placebo. Cetirizine was superior to placebo at 3, 4, 5, 6, 7, and 8 minutes (p< 0.01). Cetirizine also was superior to placebo at 9 minutes (p< 0.05). Loratadine and terfenadine erythema inhibition were better than after placebo treatment from 4 to 9 minutes, but erythema index of terfenadine at 7 minutes was not observed probability of 95% and 99%. At 10 minutes, intradermal injection of the histamine caused a mean wheal dimension for placebo, cetirizine, loratadine and terfenadine, which were 13.25$\pm$0.75 mm,7.5$\pm$ 1.02 mm (53% reduction, p<0.007),6.2$\pm$0.58 mm(43% reduction, p <0.01), and 8.4 $\pm$0.67 mm(37% reduction, p< 0.05), respectively, comparing with placebo. Loratadine and cetirizine were good antihistamines for clinical therapy for atopic dermatitis in dog.

• Journal of Korea Foresty Energy
• /
• v.22 no.3
• /
• pp.1-10
• /
• 2003

The successional status and potential natural vegetation were examined in the natural deciduous forest in Mt. Chombong area. The examination was based on the subsequent process of generation replacement by understory saplings for the dominant canopy trees within 106 20mx20m square sample plots. The transition matrix model, which was modified from mathematical theory of Markov chain, was employed to analyze the successional status of the study forest. The model suggests that study forest is still seral, and it is considered to be more than 500 years away from the steady state or climax in terms of species composition. The simulations predict a remarkable decrease in the proportion of species composition of the present dominant Quercus mongolica and Kalopanax pictus from current 42.6% and 8.1% to less than 13.3% and 0.5%, respectively, at the steady state. On the contrary, the proportions of Abies holophylla, Acer mono, Fraxinus mandshurica, Tilia amurensis, and Acer pseudo-sieboldianum will increase at the steady state. The change of predicted composition ratio was generally coincide with the result of tolerance index to be compared with the study model. The hypothesis and sensitivity of the model were also discussed to evaluate the applicability to the real situation. The overall results indicated that the present dynamics of the forest must reflect the seral state due to previous disturbance mainly by human related interference.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.28 no.6
• /
• pp.689-694
• /
• 2014

We report a female small cell lung cancer patient in the extensive stage(T3N3Mx). After 6 cycles of chemotherapy combined radiation therapy, she received inpatient Korean medical care including herbal medicine, acupuncture therapy and concurrent western oral medications of opioid analgesics and anti-anxiety agent. The chief complaint was right side thoracic wall pain which had started after chemotherapy and was not effectively controlled by analgesics. For this condition, we treated her with 2Hz of constant electrical stimulation on Jiaji (Ex-B2) points T5-T7 laterally (right) using three needles for 20 minutes once a day for 9 days. With every session of electrical acupuncture treatment, thoracic pain decreased acutely. Korean medicine treatments including Jiaji (Ex-B2) point stimulation might be tried for lung cancer patients with uncontrolled thoracic pain at least for the acute analgesic effect.

• Journal of Periodontal and Implant Science
• /
• v.36 no.3
• /
• pp.673-682
• /
• 2006

Recent study shows that implant design has a great impact on initial stability in bone. The ITI $TE^{(R)}$ implant, designed originally for immediate placement has a tapered/ cylindrical form which fits the anatomical shape of the natural alvelous or tooth root. The increased diameter at the collar region coupled with more threads lead to more bone contact and enhanced stability. The aim of this retrospective study is to evaluate the clinical use and the efficacy of recently introduced ITI TE implant with a new macro-design. The following results are compiled from 139 patients who received ITl TE implant surgery at the periodontal department. of Yonsei University Hospital between July 2002 and September 2005. 1. 139 patients received 173 ITl $TE^{(R)}$ implants in their maxilla and mandible (Mx 82, Mn 91). Posterior area accounted for 84% of the whole implant surgery, 2. In the distribution of bone quality, type III(41,0%) was the most, followed by type IV(41,0%) and type II (27.7%). As for the bone quantity, type B(43.9%) was the most, followed by type C(42.2%), type D(12.2%) and type A(1.7%). 3. 125 implants(83.9%) were treated by single crown, which accounted for the majority. 4, The total implant survival rate was 100% after a mean follow-up period of 21.2 months. This preliminary data with ITl $TE^{(R)}$ implant showed excellent survival rate although the majority of implants evaluated in this study were placed in the posterior region of the jaw and compromised sites.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10B
• /
• pp.939-945
• /
• 2008

Tn this paper we described the process and the results of an implementation of Internet terminal using G.729.1 wideband speech codec for next generation network. For this purpose firstly we chose a high performance RISC application processor having DSP features for speech codec processing and enhanced Multimedia Accelerator(eMMA) function for video codec. In the implementation of this terminal, we used G.729.1 codec recently standardized in ITU-T which is a new scalable speech and audio codec that extends 0.729 speech coding standard. To adopt G.729.1 codec to this terminal we transformed most of the fixed point C codes which require more complexity into assembly codes so as to minimize processing time in the processor. As a result of this work we reduced the execution time of the original C codes about 80% and operated in real time on the terminal. For video we used H.263/MPEG-4 codec which is supported by the eMMA with hardware in the processor. In the SIP call processing test connected to real network we obtained under looms end-to-end delay and 3.8 MOS value measured with PESQ instrument. Besides this terminal operated well with commercial terminals.