• Journal of Ship and Ocean Technology
• /
• 제5권4호
• /
• pp.44-50
• /
• 2001

Large container carriers are suffering from lack of knowledge on reliable correlation allowances between model tests and full-scale trials, especially at fully loaded condition, Careful full-scale sea trial with a full loading of containers both in holds and on decks was carried out to clarify it. Model test results were analyzed by different methods but with the same measuring data to figure out appropriated correlations factors for each analysis methods, Even if it is no doubt that model test technique is one of the most reliable tool to predict full scale powering performance, its assumptions and simplifications which have been applied on the course of data manipulation and analysis need a feedback from sea trial data for a fine tuning, so called correlation factor. It can be stated that the best correlation allowances at fully loaded condition for both 2-dimensional and 3-dimensional analysis methods are fecund through the careful sea trial results and relevant study on the large size container carriers.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.131-134
• /
• 2001

The three-dimensional precision measurement technology for industry product of middle and/or large scale has been developed. Theodolite measurement system which is one of the technology is widely used in aerospace industry. This paper describes measurement method and results for spacecraft structure test model by using the measurement system. And structural stability for STM is desribed through the comparison between design values and measured values.

• 한국자동차공학회논문집
• /
• 제3권3호
• /
• pp.97-108
• /
• 1995

A 3-dimensional double track vehicle model, that has 12-degress-of-freedom, was proposed to analyze handling and riding behaviours of an automotive car. Nonlinear characteristics of the suspension and steering systems of the vehicle model were considered in its equations of motion, which were solved by using the 4th-order Runge-Kutta integration method. Computer simulations for lane change, steady-state handling, and running-over-bump manoeuvres were made and verified by vehicle tests on proving ground. The computed results of the proposed model showed better agreement with test results than those of the conventional 2-dimensional single track model did. Especially they showed good accuracy near the characteristic speed and in high lateral accelerated manoeuvres.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.235-240
• /
• 2007

For the identification of the 3 dimensional dynamic characteristics of the Bongjeong Temple, the dynamic test for 1/3 scaled model was performed. Dynamic test with impulse excitation and vibration table excitation can provide useful data for the estimation of dynamic characteristics such as natural frequencies, damping ratios, mode shapes and stiffness center. This will complement the previous research from the 2-dimensional static test and provide the reference data for the enhanced structural analysis of the traditional wooden structures.

• Geomechanics and Engineering
• /
• 제19권3호
• /
• pp.217-227
• /
• 2019

This study focuses on an improved prediction model to determine the limiting grouting pressure of compaction grouting considering the ground surface upheaval, which is caused by the three-dimensional conical shearing failure. The 2D-dimensional failure curve in Zou and Xia (2016) was improved to a three-dimensional conical shearing failure for compaction grouting through coordinate rotation. The process of compaction grouting was considered as the cavity expansion in infinite Mohr-Coulomb (M-C) soil mass. The prediction model of limiting grouting pressure of compaction grouting was proposed with limit equilibrium principle, which was validated by comparing the results in El-Kelesh et al. (2001) and numerical method. Furthermore, using the proposed prediction model, the vertical and horizontal grouting tube techniques were adopted to deal with the subgrade settlement in Shao-huai highway at Hunan Provence of China. The engineering applicability and effectiveness of the proposed model were verified by the field test. The research on the prediction model for the limiting grouting pressure of compaction grouting provides practical example to the rapid treatment technology of subgrade settlement.

• 대한토목학회논문집
• /
• 제26권3A호
• /
• pp.465-471
• /
• 2006

지진과 같은 동적 반복하중을 받는 강구조물의 이력거동을 구현하기 위해서는 사용된 강재의 정 동적 상태에서의 응력-변형률 관계 및 특성을 고려한 동적반복소성모델이 필요하다. 본 연구에서는 SM490강재의 정 동적 단조 및 반복하중 실험을 수행하여 역학적 특성 및 응력-변형률 관계를 명확히 하였다. 그리고 실험결과에 기초하여 SM490강재의 동적반복소성모델을 제안하였으며 이를 유한변위이론에 기초한 3차원 탄소성 유한요소해석에 적용하였다. 실험시편을 모델링하여 정 동적 단조, 반복 및 변형률속도변화에 따른 3차원 탄소성 유한요소해석을 수행하였으며 이를 실험결과와 비교하였다. 비교를 통하여 본 연구에서 개발한 해석기법이 강부재의 정 동적 변형상태를 정도있게 예측할 수 있음을 검증하였다.

• 한국군사과학기술학회지
• /
• 제14권5호
• /
• pp.932-940
• /
• 2011

This study describes computational simulation results in 2-dimensional and 3-dimensional space concerning large scale gap test(LSGT) by using commercial hydrocode such as AUTODYN and LS-DYNA to analyze the detonation phenomenons of high explosives. To consider the possibilities of LSGT simulation, we used Lee - Tarver reaction rate model of PBX-9404 and Comp-B which were implemented AUTODYN's material library. Also we have tried the diverse numerical schemes such as Lagrangian, Eulerian and ALE(Arbitary Lagrangian Eulerian), SPH(Smoothed Particle Hydrodynamics) in LSGT simulations. After LSGT simulations, we compared the simulation results with published results to verify the LSGT simulations. According to the LSGT simulations, we have concluded as follows. In 2-dimensional and 3-dimensional space, Lagrangian solver provided the most reliable results based on analysis time and accuracy. When using two hydrocodes in 2-dimensional space, the simulation results are almost same except one explosive model. We have verified the modeling method and simulation results of the LSGT by using the commenrcial hydrocode in this study.

• Membrane and Water Treatment
• /
• 제3권2호
• /
• pp.77-98
• /
• 2012

A two-dimensional (2D) steady state numerical model of concentration polarisation (CP) phenomena in a membrane channel has been developed using the commercially available computational fluid dynamics (CFD) package CFX (Ansys, Inc., USA). The model incorporates the transmembrane pressure (TMP), axially variable permeate flux, variable diffusivity and viscosity, and osmotic pressure effects. The model has been verified against several benchmark analytical and empirical solutions from the membrane literature. Additionally, the model is able to predict the rejection of an arbitrary solute by the membrane using a pore model, given some basic knowledge of the geometry of the solute molecule or particle, and the membrane pore geometry. This allows for predictive design of membrane systems without experimental determination of the membrane rejection for the specified operating conditions. A demonstration of the model is presented against experimental results for two uncharged test compounds (sucrose and PEG1000) from the literature. The model will be extended to incorporate charge effects, transient simulations, three-dimensional (3D) geometry and turbulent effects in future work.

• 대한치과보철학회지
• /
• 제57권2호
• /
• pp.102-109
• /
• 2019

목적: 이 연구의 목적은 단일 수복물 지대치와 3본 고정성 수복물 지대치 모델에서 3종류의 구강 스캐너에 따른 정확도를 평가하는 것이다. 재료 및 방법: 본 연구에서는 단일 수복물 지대치와 제1대구치가 상실된 3본 고정성 수복물 지대치를 제작하고, 이를 주모형으로 설정하였다. 제작된 주 모형은 산업용 삼차원 스캐너로 스캔하였고, 이를 참조 스캔 데이터로 설정하였다. 3종류의 구강 스캐너(CS3600, CS3500, 그리고 EZIS PO)를 이용하여 주 모형을 5회 스캔 하였다. 이를 평가 스캔 데이터로 설정하였다. 삼차원 비교분석(Geomagic control X)에서 지대치의 스캔 정확도를 평가하기 위해 분할된 지대치를 선택하여 분석하였다. 통계분석은 SPSS 소프트웨어를 이용하여 분석하였다 (${\alpha}=.05$). 구강 스캐너 정확도는 kruskal-wallis test를 실시하여 비교하였고, pairwise test로 사후 검정을 실시하였다. 단일 수복물 지대치 모델과 3본 고정성 수복물 지대치 모델의 정확도 차이는 mann-whitney U test로 분석하였다. 결과: 구강 스캐너에 따른 정확도의 측정결과는 모두 유의한 차이를 보였다 (P < .05). 그리고 단일 수복물 지대치 모델과 3본 고정성 수복물 지대치 모델의 진도(trueness)는 통계적으로 유의한 차이를 보여주었으며, 단일 수복물 지대치에서 더 좋은 진도를 나타냈다 (P < .05). 정밀도(precision)에서는 유의미한 차이가 없었다 (P = .616). 결론: 단일 수복물과 3본 고정성 수복물 지대치의 정확도를 비교한 결과, 스캔 영역이 늘어날수록 지대치 스캔의 오류는 증가하였고, 3종류의 구강 스캐너에서 3본 고정성 수복물 지대치 모델의 스캔 정확도는 임상적으로 허용 가능하다.

• Interaction and multiscale mechanics
• /
• 제3권2호
• /
• pp.192-211
• /
• 2010

In most framed structures the nonlinearities and the damages are localized, extending over a limited length of the structural member. In order to capture the details of the local damage, the segments of a member that have entered the nonlinear range may need to be analyzed using the three-dimensional element (3D) model whereas the rest of the member can be analyzed using the simpler one-dimensional (1D) element model with fewer degrees of freedom. An Element-Coupling model was proposed to couple the small scale solid 3D elements with the large scale 1D beam elements. The mixed dimensional coupling is performed imposing the kinematic coupling hypothesis of the 1D model on the interfaces of the 3D model. The analysis results are compared with test results of a reinforced concrete pipe column and a structure consisting of reinforced concrete columns and a steel space truss subjected to static and dynamic loading. This structure is a reduced scale model of a direct air-cooled condenser support platform built in a thermal power plant. The reduction scale for the column as well as for the structure was 1:8. The same structures are also analyzed using 3D solid elements for the entire structure to demonstrate the validity of the Element-Coupling model. A comparison of the accuracy and the computational effort indicates that by the proposed Element-Coupling method the accuracy is almost the same but the computational effort is significantly reduced.