• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.6
• /
• pp.110-116
• /
• 1998

For the vibration analysis of 3-dimensional piping system containing fluid flow, a transfer matrix method is presented. The fluid velocity and pressure were considered, that coupled to longitudinal and flexural vibrations. Transfer matrices and point matrices were derived from direct solutions of the differential equations of motion of pipe conveying fluids, and the variations of natural frequency with flow velocity for 3-dimensional piping system were investigated.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.3
• /
• pp.92-98
• /
• 1998

This paper presents three boundary techniques which are useful for FEM analysis of composite laminates: 1) a rotational symmetric boundary technique . 2) a quasi three-dimensional boundary technique and 3) a contact boundary technique. The use of the rotational symmetric boundary technique is possible for a smaller FEM model. With the use of the quasi three-dimensional boundary tecnique. quasi three dimensional analysis of composite laminates can be performed on the conventional 3-D FEM program These techniques can readily be adopted to FEM programs.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.107-109
• /
• 2004

Stepping motors are widely used for various electric instruments. In case of analysing claw pole PM slopping motor 3-dimensional analysis is necessary for accurate field calculation. This paper presents static torque characteristics of a permanent magnet type stepping motor with claw poles using three-dimensional finite element analysis.

• Progress in Medical Physics
• /
• v.34 no.3
• /
• pp.23-32
• /
• 2023

Purpose: In radiomics analysis, to evaluate features, and predict genetic characteristics and survival time, the pixel values of lesions depicted in computed tomography (CT) and magnetic resonance imaging (MRI) images are used. CT and MRI offer three-dimensional images, thus producing three-dimensional features (Features_3d) as output. However, in reports, the superiority between Features_3d and two-dimensional features (Features_2d) is distinct. In this study, we aimed to investigate whether a difference exists in the prediction accuracy of radiomics analysis of lung cancer using Features_2d and Features_3d. Methods: A total of 38 cases of large cell carcinoma (LCC) and 40 cases of squamous cell carcinoma (SCC) were selected for this study. Two- and three-dimensional lesion segmentations were performed. A total of 774 features were obtained. Using least absolute shrinkage and selection operator regression, seven Features_2d and six Features_3d were obtained. Results: Linear discriminant analysis revealed that the sensitivities of Features_2d and Features_3d to LCC were 86.8% and 89.5%, respectively. The coefficients of determination through multiple regression analysis and the areas under the receiver operating characteristic curve (AUC) were 0.68 and 0.70 and 0.93 and 0.94, respectively. The P-value of the estimated AUC was 0.87. Conclusions: No difference was found in the prediction accuracy for LCC and SCC between Features_2d and Features_3d.

• Elastomers and Composites
• /
• v.51 no.4
• /
• pp.275-279
• /
• 2016

Additive manufacturing or 3D printing is a new manufacturing process and its application is getting growth. However, the product qualities such as mechanical strength, dimensional accuracy, and surface quality are low compared with conventional manufacturing process such as molding and machining. In this study not only mechanical characteristics of polymer sandwich panel having three dimensional core layer but also mechanical characteristics of core layer itself were analyzed. The shape of three dimensional core layer was pyramidal kagome structure. This core layer was fabricated by two different methods, injection molding with PP resin and material jetting type 3D printing with acrylic photo curable resin. The material for face sheets in the polymer sandwich panel was PP. Maximum load, stiffness, and elongation at break were examined for core layers fabricated by two different methods and also assembled polymer sandwich panels. 3D printed core showed brittle behavior, but the brittleness decreased in polymer sandwich panel containing 3D printed core. The availability of 3D printed article for the three dimensional core layer of polymer sandwich panel was verified.

• Bulletin of the Korean Mathematical Society
• /
• v.53 no.3
• /
• pp.723-732
• /
• 2016

We characterize proper biharmonic anti-invariant surfaces in 3-dimensional generalized (${\kappa}$, ${\mu}$)-manifolds with constant mean curvature by means of the scalar curvature of the ambient space and the mean curvature. In addition, we give a method for constructing infinity many examples of proper biharmonic submanifolds in a certain 3-dimensional generalized (${\kappa}$, ${\mu}$)-manifold. Moreover, we determine 3-dimensional generalized (${\kappa}$, ${\mu}$)-manifolds which admit a certain kind of proper biharmonic foliation.

• Journal of Ship and Ocean Technology
• /
• v.3 no.3
• /
• pp.13-24
• /
• 1999

In this paper, a 2-dimensional novel beam element is developed and a method to replace the 3-dimensional analysis with 2-dimensional analysis is proposed. The developed novel beam element named rigid-ended beam element can consider the effect of three kinds of span points within one element, which was impossible in modeling with the ordinary beam element. Calculated results for the portal frame using the rigid-ended beam element agree with the results using membrane element. And also, the proposed simplified 3- dimensional analysis method which includes two step analysis using influence coefficients shows good accuracy. Structural analysis using the rigid-ended beam element and the simplified 3-dimensional method is revealed to have good computing efficiency due to unnecessity of the elements corresponding to the brackets and simplification of 3-dimensional analysis.

• Textile Coloration and Finishing
• /
• v.31 no.3
• /
• pp.214-224
• /
• 2019

This investigation reported the simulation technologies to design the 3-dimensional fabrics such as 3 dimensional multi-layered fabric, 3 dimensional braided fabric and spacer fabric. The simulation system or software has been actively used to develop products of 3 dimensional fabric which can be reduced development costs and time. Thus, many countries such as Japan, Germany, China, and U.K. show great interests on simulation technologies for developing new materials and processes including 3 dimensional fabric field. In this study, simulation systems have been reviewed for the 3 dimensional fabric design system from Mikawa Textile Research Center, Japan; ProCad and ProFab from Karl Mayer and Texion, Germany; xComposites from China; TexGen from Nottingham University, U.K.; TexPro from Young Woo CnI, Korea, respectively.

• Transactions of Materials Processing
• /
• v.20 no.3
• /
• pp.206-213
• /
• 2011

A flexible die, which is composed of a number of punches with adjusted heights to form a three-dimensional curved surface, is a crucial part of a flexible forming technology. In this study, the punch and control system of the flexible die were designed. The flexible die is divided into three modules, namely, punch, control and joint, and the corresponding modules were developed. The punch module materializes a three-dimensional forming surface by the control module, which is composed of an AC servo motor set and a linear guide. The joint module is necessary for the sequential motion between the servo motor set and the punch module. A sequential motion algorithm for the AC servo motor set, that uses the data of the punch relative heights, was also proposed. Finally, a flexible stretch forming test was carried out using the presently designed flexible die.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.3
• /
• pp.222-233
• /
• 2011

This study is for the multi-dimensional analysis of diverse data sets for artificial reefs off the coast of Shimonoseki, Yamaguchi prefecture, Japan. Various data sets recorded in artificial reefs ground were integrated in new GIS software: to reveal the relationships between water temperature and fish schools; to visualize the quantitative connection between the reefs and the fish schools; and to compare the seabed types derived from two different data sources. The results obtained suggest that the application of GIS in analyzing multi-dimensional data is a better way to understand the characteristics of fish schools and environmental information around artificial reefs and particularly in the evaluation of the effectiveness of artificial reefs.