• Journal of Korean Academy of Nursing
• /
• v.25 no.4
• /
• pp.751-773
• /
• 1995

We, clinical nurse specialists practising and guiding student practice in a Community health nursing clinic, wanted to develop a family pattern appraisal consistent with Rogers' conceptual system, the nursing model guiding our practice. We use Rogers' model because it is harmonious with the traditional Korean view of the one human, natural and cosmic world. The purpose of our research was to contribute to science - based nursing practice, not only, one helpful model, but also a model of how to use, in guiding practice, a conceptual system which reflects nurse practitioners' philosophy of nursing, is intellectually satisfying, and enriches meaning in daily nursing life. The research objectives were to review the literature on Rogers' model and analyse it according to Kim's five - level analytical framework, to explore Rogers' definition of family, to review appraisals based on Rogers' model, and to develop a family appraisal which is culturally appropriate for use in our community. This work including the use of the appraisal and its refinement with families in our practice which was done during 1994 and 1995, in Seoul, in the Capital of the Republic of Korea. At the highest level of analysis, Rogers conceptual system emphasizes acausality and multidimentional meaning ; the world view is characterized by process, movement and wholeness. The epistemology Is one of holism and the knowledge base includes all forms of experience, from sensory to mystical, objective, and subjective. At the metaparadigm level, nursing focuses on the unitary human being and the environment. At the level of nursing philosophy, the model identifies human being, nursing, nurse, and illness and health. At the paradigm level the model assumes the irriducibility of the human to parts, noncausality and continual change. Rogers' practice methodology consists of pattern manifestation appraisal and deliberative mutual patterning. Under-standing patterns and patterning of people is the key to helping them achieve their potential. At the theory level, the basic assumptions, key concepts, and homeodynamic principles were identified. Rogers states the family energy field is an undividable, four-dimensional negentropic energy field which is in a larger envircinmental field show-ing such characteristics as cannot be predicted by knowledge of individual family members. Based on the word of Rogers scholars, we chose Rogers' correlates of patterning to understand the family unit as a whole-frequency, rhythms, motion, time perception, sleeping-waking beyond waking, pragmatic -imaginative-visionary to develop the appraisal. We, also used some of Barrel's (1988) criteria including interpersonal network and professional health care access and use, and Cordon's (1982) criteria including self perception - self concept modified to fit the family. Our family Pattern appraisal included 1. Influencirg data, 2. Professional health care access and use, 3. Family self perception-self concept, 4. Family interpersonal network, 5. Sleep-wake-be-yond waking, 6. Pragmatic-imaginary-visionary, 7. Family frequency and rhythm, 8. Family motion, 9. Family time perception. The appraisal was used with four families and modified to eliminate overlap and to make it possible for the family member to express themselves more easily. We plan to gain more experience with the appraisal toward further development of the tool.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.217-226
• /
• 2007

Putting score counts about 43 % of the golf score. The dominant idea of the putting motion to amateur golfers as well as to many professional golfers is a pendulum-like motion. If a golfer's putting stroke motion is a pendulum-like motion, the putting motion should be straight-back-and-through, the same backswing, downswing, and follow through length and period, and a swing with a fixed hinge joint. If the putting motions of the human are different from the pendulum motion, there could be confusion in understanding and teaching golf putting. The purpose of this study was to examine the center of rotation(COR) of the putter head to reveal whether professional golfers really putt like a pendulum. Thirteen male professional golfers were recruited for the study. Each golfers executed 10.94 m putts six times on an artificial grass mat. Putter head position data were collected through a 60 Hz three-dimensional motion analysis system and low pass filtered with cut-off frequency of 6 Hz. COR of the putter head was mathematically acquired. Each golfer's last five putting motions were considered. The results show that the COR of the putter head was neither fixed nor located inside of the golfer. The medio-lateral directional component of the COR of the putter head fluctuated in the range of 10 cm during downswing and follow through. The anterior-posterior directional component of the COR of the putter head was fixed from the beginning of the downswing through impact. Just after impact, however, it moved to the target up to 60 cm. The superior-inferior directional component of COR of the putter head moved in a superior direction with the beginning of the downswing and showed peak height just prior to impact. During the follow through, it moved back in an inferior direction. The height-normalized peak value of the COR of the putter head was $1.4{\pm}0.3$ height. Technically speaking, male professional golfers' 10.94 m putting motion is not a pendulum-like motion. The dominating idea of a pendulum-like motion in putting might come from the image of the flawless, smooth motion of a pendulum.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.4
• /
• pp.661-678
• /
• 1993

The purpose of this study was to analyze the stress distribution at supporting bone according to the types of endosseous implants. This investigation evaluated the stress patterns in rectangular photoelastic models produced by four different types of dental implants such as $Br\ddot{a}nemark$, screw type of Steri-Oss, blade type of Steri-Oss, IMZ with IMC and resin tooth using the techniques of quasi-three dimensional photoelasticity. All prostheses were casted in the same nonprecious alloy and were cemented or screwed on their respective implants and abutments. 20 kg of vertical load was applied on the central fossa of casted crown and 16 kg of inclined had was applied on the top third of distal surface of casted crown respectively. The results were as follows : 1. Under the vertical load, screw implants of Steri-Oss and $Br\ddot{a}nemark$ showed increasing stress condition between and around the screw threads along the implant lateral surface and cylindrical implant of IMZ showed the less stress condition along the lateral surface with concentration of stress mostly near the root apex. 2. Under the vertical load, the stress of Steri-Oss blade was distributed uniformly at the alveolar bone under the broad blade. 3. Under the inclined load, the stress concentration of Steri-Oss screw and $Br\ddot{a}nemark$ was developed highly around the mesiocervical bone area on the contralateral side to force application. The stress of $Br\ddot{a}nemark$ with flexible gold glod was more concentrated in the cervical bone area than that of Steri-Oss with stiff screw. 4. Under the inclined load, the stress of Steri-Oss blade broadly was distributed around the mesioceivical bone area and the lower and mesial bone area of the blade. 5. Under the Inclined load, IMZ implant showed the gap between c개wn and fixture due ta deformation of the IMC and IMZ was lower in stress concentration developed around the mesiocervical bone area than $Br\ddot{a}nemark$ and Steri-Oss screw. 6. Under the inclined load, the stress magnitude induced in the mesiocervical bone area of implants was in order of $Br\ddot{a}nemark$, Steri-Oss strew, IMZ and Stsri-Oss blade. 7. Tilting forces as compared to axial forces exerted greater magnitude of stress in the cervical bone area of the implant. 8. In respect of stress distribution, Steri-Oss blade was superior than any other implants and in respect of the stability by horizontal lone, IMB and $Br\ddot{a}nemark$ was inferior than any other implants.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.20 no.2
• /
• pp.83-94
• /
• 2004

The purpose of this study was to compare the distributing pattern of stress according to the types of occlusal load on the finite element models of the splinted implant prostheses. The finite element model was designed with the parallel placement of two fixtures ($4.0mm{\times}11.5mm$) on mandibular first and second molars. The cemented crowns for mandibular first and second molars were made. Three-dimensional finite element model was created with the components of the implant, surrounding bone and cemented crowns. Two types of occlusal load, the point load and the surface load within 0.5 mm radius circle, were applied to the finite element models with 200N magnitude in axial(along the long axis of the implant and oblique(angulation of $30^{\circ}$ to the long axis) directions perpendicular to cuspal incline. Loads were positioned from the center of central fossa and to distance of 2 mm and 4 mm apart from the center of central fossa. Von-Mises stresses were recorded and compared in the fixtures and sections. The results were as following : 1. Under axial loading at the central fossa, the stress was distributed along the fixture except for the apical portion, not relative to both point & surface contacts. 2. With offset distance increasing, the highest stresses were concentrated in the neck portion of the fixture. 3. The maximum von Mises stress under the oblique load was greater than that under the axial load. 4. Under the oblique load, the highest stress were concentrated in the buccal side and lingual neck portion of the fixture with offset distance increasing. The results had a tendency to increase the stress on the neck portion of fixture with the offset and oblique loads increasing. The design of occlusal scheme should be allowed to distribute stress axially in maximum intercuspation and to decrease the angulation of cuspal incline.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.1
• /
• pp.55-68
• /
• 2007

The purpose of this study was to analyze the distribution of stress in the surrounding bone around implant placed in the first and second molar region. Two different three-dimensional finite element model were designed according to vertical bone level around fixture ($4.0mm{\times}11.5mm$) on the second molar region. A mandibular segment containing two implant-abutments and a two-unit bridge system was molded as a cancellous core surrounded by a 2mm cortical layer. The mesial and distal section planes of the model were not covered by cortical bone and were constrained in all directions at the nodes. Two vertical loads and oblique loads of 200 N were applied at the center of occlusal surface (load A) or at a position of 2mm apart buccally from the center (load B). Von-Mises stresses were analyzed in the supporting bone. The results were as follows; 1. With the vertical load at the center of occlusal surface, the stress pattern on the cortical and cancellous bones around the implant on model 1 and 2 was changed, while the stress pattern on the cancellous bone with oblique load was not. 2. With the vertical load at the center of occlusal surface, the maximum von-Mises stress appeared in the outer distal side of the cortical bone on Model 1 and 2, while the maximum von-Mises stress appeared in the distal and lingual distal side of the cortical bone with oblique load. 3. With the vertical load at a position of 2 mm apart buccally from the center, there was the distribution of stress on the upper portion of the implant-bone interface and the cortical bone except for the cancellous bone, while there was a distribution of stress on the cancellous bones at the apical and lingual sides around the fixture and on the cortical bone with oblique load. 4. With the changes of the supporting bone on the second molar area, the stress pattern on the upper part of the cortical bone between two implants was changed, while the stress pattern on the cancellous bone was not. The results of this study suggest that establishing the optimum occlusal contact considering the direction and position of the load from the standpoint of stress distribution of surrounding bone will be clinically useful.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.5
• /
• pp.240-246
• /
• 2002

$TiO_2$ films on soda-lime-silica glasses were prepared by spin coating-pyrolysis process using titanium naphthenate as a starting material. As-deposited films were pyrolyzed at $500^{\circ}C$ for 10 min in air and annealed at 500, 550 and $600^{\circ}C$ for 30 min in air. Crystallinity of the film was investigated by X-ray diffraction analysis. A field emission-scanning electron microscope and an atomic force microscope were used for characterizing the surface morphology and the surface roughness of the film. After annealing at 550 and $600^{\circ}C$, the X-ray diffraction patterns consist of only anatase peak. Films annealed at 500 and $550^{\circ}C$ exhibited flat surfaces. While with the increase in annealing temperature to $600^{\circ}C$, the $TiO_2$ film showed abnormal growth of three-dimensional needle-shaped grains. For all samples, high transmittance, above 90 % at 500 nm, was obtained at visible range. To investigate photocatalytic properties, IR absorbance associated with the C-H stretching vibrations of a thin solution-cast film of stearic acid under 365 nm (2.4 mW/$\textrm{cm}^2$) UV irradiation was estimated.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.4
• /
• pp.103-112
• /
• 1991

In this study, a numerical model was established and applied to simulate the steady-state groundwater and heat flow in an isotropic, heterogeneous, three dimensional aquifer system with uniform thermal properties and no change of state. This model was developed as an aid in screening large groundwater-flow systems as prospects for underground waste storage. Driving forces on the system are external hydrologic conditions of recharge from precipitation and fixed hydraulic head boundaries. Heat flux includes geothermal heat-flow, conduction to the land surface, advection from recharge, and advection to or from fixed-head boundaries. The model uses an iterative procedure that alternately solves the groundwater-flow and heat-flow equations, updating advective flux after solution of the groundwater-flow equation, and updating hydraulic conductivity after solution of the heat-flow equation. Dierect solution is used for each equation. Travel time is determined by particle tracking through the modeled space. Velocities within blocks are linear interpolations of velocities at block faces. Applying this model to the groundwater-flow system located in Jigyung-ri. Songla-myun, Youngil-gun. Kyungsangbuk-do, the groundwater-flow system including distribution of head, temperature and travel time and flow line, is analyzed.

• Journal of Animal Science and Technology
• /
• v.59 no.7
• /
• pp.16.1-16.6
• /
• 2017

Background: This study was performed to investigate the impact of exogenous ghrelin on the pancreatic ${\alpha}$-amylase outputs and responses of pancreatic proteins to ghrelin that may relate to pancreatic exocrine. Methods: Sprague-Dawley male rats (9 weeks old, $300{\pm}10g$) were injected with ghrelin via intraperitoneal (i.p.) infusion at dosage of 0, 0.1, 1.0 and $10.0{\mu}g/kg$ body weight (BW), respectively. The plasma ghrelin and cholecystokinin (CCK) level were determined using enzyme immunoassay kit; the mRNA expression of ghrelin receptor ($GHSR-1{\alpha}$) and growth hormone (GH) receptor were assessed by reverse transcription PCR; the expressions of pancreatic ${\alpha}$-amylase activity, extracellular-signal-regulated kinases (ERK), phosphorylated extracellular-signal-regulated kinases (pERK) and c-Jun N-terminal kinase (JNK) were evaluated by western blotting; moreover the responses of pancreatic proteins to ghrelin were analyzed using the two-dimensional gel electrophoresis system. Results: The exogenous ghrelin (1.0 and $10.0{\mu}g/kg\;BW$) elevated the level of plasma ghrelin (p < 0.05), and suppressed the expression of pancreatic ${\alpha}$-amylase at a dose of $10.0{\mu}g/kg\;BW$ (p < 0.05). No difference in the level of plasma CCK was observed, even though rats were exposed to any dose of exogenous ghrelin. In addition, a combination of western blot and proteomic analysis revealed exogenous ghrelin ($10.0{\mu}g/kg\;BW$) induced increasing the JNK and ERK expressions (p < 0.05) and four proteins such as Destrin, Anionic trypsin-1, Trypsinogen, and especially eukaryotic translation initiation factor 3 in rat pancreas. Conclusions: Taken together, exogenous ghrelin by i.p. infusion plays a role in the pancreatic exocrine secretion via mitogen-activated protein kinase signaling pathway.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.3
• /
• pp.71-79
• /
• 2004

Owing to the rapid increase of the number of automobiles, the traffic is being heavily crippled as time goes by. To provide drivers with better safety and convenience, a variety of CNSs(Car Navigation System) are being installed more and more specially for the vehicles which are produced in recent days. As the CNS has gained the public popularity, it has been playing a role as a component of the multimedia system in a vehicle in addition to providing the capability of route guidance service. It is, therefore, now recognized as an important unit of the vehicle interior system. As the situation has been changed as formerly described, it is necessary that not only the functions but also the usability and exterior features are to be designed to suit customers' tastes. This paper is an attempt to find out what the major sensibility factors which customers want as far as a CNS is concerned are. Because these factors can differ from a vehicle type to another that customers prefer, the analysis is based on the vehicle preference. It is proved that MDS(Multi Dimensional Scaling) is an effective method to analyze the sensibility factors for the different types of vehicles. The result shows that for the people who prefer the sedan-type vehicles, luxuriousness, harmoniousness, and texture are major factors. For people who like sports car, faminism, salience, and dynamics are major factors. For people who prefer SUV's(Sports Utility Vehicle) or MPV's(Multi Purpose Vehicle), solidity, dynamics, and convenience are important.

• Korean Journal of Remote Sensing
• /
• v.34 no.5
• /
• pp.749-762
• /
• 2018

In this study, the changes of the sunshine environment due to the construction of buildings were analyzed by season. Using a geographic information system (GIS) data, the topography and the buildings were constructed around Pukyong National University (PKNU) in Busan. The numerical model was performed for a week in each season, before and after the construction of buildings. Even before the construction of the high-rise building complex, the area of sunshine block is wide due to the apartment complex located in the southeast of the PKNU campus and the mountain in the south. After the construction, the sunshine-blocked area became wider after the sunrise and before the sunset. The area of sunshine block after 1 hour at sunrise increased by 1.60%, 1.50%, 1.58% and 1.36% in the vernal equinox, summer solstice, autumnal equinox and winter solstice, respectively. The building complex in the east (south) of the PKNU campus made shadow in more than 1,000 m (750 m) toward the west (east) just before the sunrise (sunset). Especially, the sunshine duration in PKNU campus decreased by 46.61%, 22.75%, 58.56%, and 11.31% in the vernal equinox, summer solstice, autumnal equinox and winter solstice, respectively. The analysis of the sunshine duration for a dormitory building showed that the construction of the building complex in the south of the PKNU campus reduced the sunshine area of the western (southern) wall of the dormitory by 30.91% (49.45%) for a winter week.