• 한국안광학회지
• /
• 제20권2호
• /
• pp.105-115
• /
• 2015

목적: 본 연구는 안경렌즈홀더와 콘택트렌즈홀더를 사용하여 다양한 디옵터와 함수율을 가진 소프트 콘택트렌즈의 굴절력을 측정하고 정확도를 평가하여 그 차이를 비교하였다. 방법: 실험에 사용한 소프트 콘택트렌즈의 함수율은 각각 38%, 43% 및 58%이었으며, 굴절력에 따라 -3.000 D, -7.000 D 및 -10.000 D로 분류하여 각각 실험하였다. 또한 망원경식 렌즈미터를 사용하여 안경렌즈홀더 및 콘택트렌즈홀더로 각각의 정점굴절력을 측정하여 정확도를 분석하였다. 결과: 안경렌즈홀더를 사용한 경우 -3.0000 D는 -3.3273 D로 측정되었으며, -7.0000 D는 -7.1306 D, -10.0000 D는 -10.2944D로 각각 측정되었다. 또한 콘택트렌즈홀더를 사용한 경우 -3.0000 D는 -3.1060 D로 측정되었으며, -7.0000 D는 -7.0028 D, -10.0000 D는 -10.2611 D로 각각 측정되었다. 모든 종류의 콘택트렌즈에서 콘택트렌즈홀더를 사용한 방법이 안경렌즈홀더를 사용한 방법보다 더 정확한 측정값을 나타내었다. 결론: 위 결과로 볼 때, 망원경식 렌즈미터를 사용한 소프트 콘택트렌즈의 굴절력 측정에 있어 콘택트렌즈홀더를 사용한 방법이 안경렌즈홀더를 사용한 방법보다 더 높은 정확도를 가진 것으로 판단된다.

• 한국의류학회지
• /
• 제47권1호
• /
• pp.123-136
• /
• 2023

To develop smart sportswear capable of measuring biometric data, we created a close-fitting pattern using two- and three-dimensional (2D and 3D, respectively) methods. After 3D virtual fitting, the tightness of each pattern was evaluated using image processing of contact points, mesh deviation, and cross-sectional shapes. In contact-point analysis, the 3D pattern showed high rates of contact with the body (84.6% and 93.1% for shirts and pants, respectively). Compared with the 2D pattern, the 3D pattern demonstrated closer contact at the lower chest, upper arm, and thigh regions, where electrocardiography and electromyography were primarily carried out. The overall average gap was also lower in the 3D pattern (5.27 and 4.66 mm in shirts and pants, respectively). In the underbust, waist, thigh circumference, and mid-thigh circumference, the cross-section distance between clothing and body was showed a statistically significant difference and evenly distributed in the 3D pattern, exhibiting more closeness. The tightness and fit of the 3D smart sportswear sensor pattern were successfully evaluated. We believe that this study is critical, as it facilitates the comparison of different patterns through visualization and digitization through 3D virtual fitting.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.248-248
• /
• 2010

CMOS 축소화가 32nm node를 넘어서 지속적으로 진행되기 위하여 FinFET, Surround Gate and Tri-Gate와 같은 Fully Depleted 3-Dimensional 소자들이 SCE를 다루기 위해서 많이 제안되어 왔다. 하지만 소자의 축소화를 진행함에 있어서 좁고 균일한 patterning을 형성하는 것과 동시에 낮은 Extension Region과 Contact Region에서의 Series Resistance을 제공하여야 하고 Source/Drain Contact Formation을 확보하여야 한다. 그리고 소자의 축소화가 진행됨으로써 Silicide의 응집현상과 Source/Drain Junction의 누설전류에 대한 허용범위가 점점 엄격해지고 있다. ITRS 2005에 따르면 32nm CMOS에서는 Contact Resistivity가 대략 $2{\times}10-8{\Omega}cm2$이 요구되고 있다. 또한 Three Dimensional 소자에서는 Fin Corner Effect가 Channel Region뿐만 아니라 S/D Region에서도 중대한 영향을 미치게 된다. 따라서 본 논문에서 제시하는 Novel S/D Contact Formation 기술을 이용하여 Self-Aligned Dual/Single Metal Contact을 이루어Patterning에 대한 문제점 해결과 축소화에 따라 증가하는 Contact Resistivity 문제점을 해결책을 제시하고자 한다. 이를 검증하기3D MOSFET제작하고 본 기술을 적용하고 검증한다. 또한 Normal Doping 구조를 가진3D MOSFET뿐만 아니라 SCE를 해결하기 위해서 대안으로 제시되고 있는 SB-MOSFET을 3D 구조로 제작하고, 이 기술을 적용하여 검증한다. 그리고 Silvaco simulation tool을 이용하여 S/D에 Metal이 Contact을 이루는 구조가 Double type과 Triple type에 따라 Contact Resistivity에 미치는 영향을 미리 확인하였고 이를 실험으로 검증하여 소자의 축소화에 따라 대두되는 문제점들의 해결책을 제시하고자 한다.

• Tribology and Lubricants
• /
• 제28권6호
• /
• pp.297-302
• /
• 2012

We conducted 3D elastic contact analysis of a sharkskin surface pattern for the characteristic assessment of biomimetic shark skin structure pattern for engineering applications. Rough sharkskin surfaces of similar size with real shark skin scales are generated numerically. Under the assumption of the contact of a plate on the generated sharkskin surface, contact performances such as contact pressure, real contact area, and surface separation are evaluated.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.72-79
• /
• 2000

In case of rough contact fatigue, the accurate calculation of surface tractions is essential to the prediction of crack initiation life. Accurate Surface tractions influencing shear stress amplitude can be obtained by contact analysis based on tile morphology of contact surfaces. In this study, to simulate rough contact under sliding condition, gaussian rough surface generated numerically in the previous study was used and to calculate crack initiation life in the substrate, dislocation pileup theory was used.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권4호
• /
• pp.16-21
• /
• 2008

The demand for three-dimensional (3D) shape measurements is increasing in a variety of fields, including the manufacture of molds and dies. The most popular technology for 3D shape measurement is the coordinate measuring machine (CMM) with a contact trigger probe. Although a CMM provides a high degree of accuracy, it is inefficient due to its long measuring time. It also has difficulty measuring soft objects that can be deformed by the touch of the contact probe. In addition, a CMM cannot digitize areas that are difficult to reach, and cannot capture very minute details on the surface of complex parts. For these reasons, optical non-contact measurement techniques are receiving more attention since they eliminate most of the problems associated with contact methods. Laser scanning is emerging as one of the more promising non-contact measurement techniques. This paper describes various acquisition considerations for laser scanning, including the accuracy of the 3D scan data, which depends on the charge-coupled device (CCD) gain and noise. The CCD gain and noise of a 3D laser scanner are varied while keeping the other conditions constant, and the measurement results are compared to the dimensions of a standard model. The experimental results show that a considerable time savings and an optimum degree of accuracy are possible by selecting the proper CCD gain and noise.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.836-839
• /
• 2004

Qualitative elevation of products is very important Part. A business racking us brains to find for qualitative elevation of products. Recently, measurement accuracy of a non-contact 3D scanner has been rapidly improving. As a result, the number application cases of non-contact 3D scanners are increasing. A non-contact 3D scanner is capable of measuring a curved surface rapidly and has high resolution. It is more affordable and potable than the CMMs, It is therefore expected to be applied more frequently in more diverse industries. Automating the measuring process using a non-contact 3D scanner and developing a technology, which allows a user to measure easily, will eventually improve the quality of products. As their inspection and analysis processes improve.

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.171-182
• /
• 2003

Tire vibration modes are known to play a key role in vehicle ride and comfort characteristics. Inputs to the tire such as impacts, rough road surface, tire nonuniformities, and tread patterns can potentially excite tire vibration. In this study, experimental modal analysis on the tire in ground contact are performed by a 3-D impact at the center of contact patch to investigate which modes of tire influence the vibration of wheel and axle. Through the experiment, the vibration transmission properties from tire to axle are examined. And we have compared the influential tire modes when the tire is excited by a vertical impact with those when excited by the 3-D impact. Additionally, the modes of ground contact tire are compared with those of the suspended tire.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.471-474
• /
• 2007

A domain/boundary decomposition technique is applied to carry out efficient finite element analyses of 3-D contact problems. Appropriate penalty functions are selected for connecting an interface and contact interfaces with neighboring subdomains that satisfy continuity constraints. As a consequence, all the effective stiffness matrices have positive definiteness, and computational efficiency can be improved to a considerable degree. If necessary, any complex-shaped 3-D domain can be divided into several simple-shaped subdomains without considering the conformity of meshes along the interface. With a set of numerical examples, the basic characteristics of computational efficiency are investigated carefully.

• 한국안광학회지
• /
• 제20권4호
• /
• pp.455-462
• /
• 2015

목적: 친수성 콘택트렌즈 정점굴절력 측정 방식중 하나인 wet cell 측정법을 활용한 국산화 측정 홀더와 프로그램 개발에 관한 연구를 위해 현재 사용되어지고 있는 Poster wet cell 홀더와 함수율별 굴절력의 측정값을 비교 분석하였다. 방법: 안경원에서 사용 중인 기존 제품과 새롭게 개발된 국산제품에 식염수를 채워 넣고 소프트콘택트렌즈의 굴절력을 측정하였다. 실험에 사용한 친수성 콘택트렌즈는 안경원에서 많이 사용되고 있는 국내산 렌즈를 사용하였으며, 함수율별과, 구면굴절력별로 분류하여 각각 실험하였다. 결과: wet cell 방식으로 콘택트렌즈 굴절력 측정 시 새롭게 개발한 홀더의 경우 자동렌즈미터를 사용하여 굴절력을 측정한 결과 -3.00 D에서 함수율 38%는 -3.01 D, 함수율 45%는 -3.00 D, 함수율 58%는 -2.98 D로 측정되었으며, Poster wet cell 홀더를 사용하여 렌즈를 측정한 결과 -3.00 D에서 함수율 38%는 -3.60 D, 45%는 -3.06 D, 58%는 -2.46 D로 각각 측정되었다. 결론 : 고함수율에서 굴절력 측정값은 wet cell 방식의 두 홀더 모두 낮게 나타났으며, 새롭게 개발된 홀더와 프로그램을 통한 자동렌즈미터의 측정값이 기존의 Poster soft contact lens wet cell 측정방식에 비해 더 정확한 굴절력 측정 결과를 나타내었다.