• 전자공학회논문지
• /
• 제50권7호
• /
• pp.292-299
• /
• 2013

본 논문에서는 IEEE 802.15.3 Medium Access Control Layer(MAC)와 UWB PHY(Physical Layer)의 기반에서 유/무선 통신이 가능한 동축 케이블 기반의 데이터 전송 시스템을 설계하고 구현하였다. 구현된 시스템은 가정용 동축 케이블(Coaxial Cable)이나 광동축 혼합망(Hybrid Fiber Coax) 기반에서 기가비트(Gigabit) 전송률로 양방향 데이터 전송이 가능하다. 본 동 축케이블 기반의 송수신 시스템은 가정이나 사무실의 $75{\Omega}$ 동축 케이블로 명령, 제어 그리고 데이터가 송수신 된다. 구현된 시스템은 중심 주파수 4GHz에서 1.33GHz의 대역폭으로 동작하며, BPSK를 사용하여 채널 전력의 ${\pm}15dBm$으로 심벌을 송신한다. 개발된 시스템을 일반적인 가정환경 내에서의 실험 조건으로 최대 3개의 CATV RF 분배기를 통해 동작함을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1347-1350
• /
• 1999

접지는 최근까지 대형 변전소를 제외한 대부분의 분야에서 정확한 현장 분석 없이 단순히 접지저항만을 계산하여 시공하고 있다. 본 논문에서는 접지 설계에 필수적인 시공 현장의 대지저항률을 실측하여 컴퓨터 시뮬레이션을 통해 지질특성을 분석한 후, 3가지 방식의 접지시스템을 현장에 맞게 설계 시공하였다. 각각의 접지 시스템의 시공은 동일한 장소에서 이루어 졌으며, 시공된 각각의 접지시스템들의 결과를 실측하여 접지 설계에 따른 시공 성능을 확인하였으며, 접지시스템들의 성능과 특성을 상호 비교 분석함으로써 현장에 가장 적합한 접지시스템을 제안하였다.

• Journal of the Optical Society of Korea
• /
• 제9권2호
• /
• pp.79-83
• /
• 2005

Spatial calibrations have been performed on the Medium-sized Aperture Camera (MAC) of the RazakSAT satellite. Topics discussed in this paper include the measurements of system modulation transfer function (MTF), relative pixel line-of-sight (LOS), and end-to-end imaging tests. The MTF measurements were made by capturing the scanned knife-edge image on a pixel, and an issue in the MTF calculation algorithm is discussed. The method used to place the focal plane at the correct focal position is described, since they make use of MTF measurements. Relative LOS measurements are done by theodolite measurements of the telescope. Qualitative ground test result of end-to-end imaging is given.

• 한국해양환경ㆍ에너지학회지
• /
• 제8권3호
• /
• pp.116-121
• /
• 2005

본 연구에서는 자유표면을 갖는 대규모의 환경유동의 해를 구하는데 있어 비정수압의 효과를 고려하는 새로운 계산 기법을 제시하였다. Sigma 좌표계에서 시간은 전진차분으로, 공간은 중간차분 및 풍상차분을 혼합하여 2단계 해법을 도입하였다. 계산기법의 타당성과 유효성을 검증하기 위하여, 자유표면을 갖는 정상유동과 비정상유동에 대한 전형적인 예를 설정하여 정수압 계산과 비정수압 계산을 수행하고 이들을 비교하였다. 계산결과 복잡한 해저지형을 갖는 자유표면 유동에 있어, 지정수압효과가 무시할 수 없는 유동영역이 존재함이 입증되었으며, MAC기법과 같은 3차원 유체동역학적 기법을 적용하기에는 비경제적인 문제에 대해 본 계산기법이 매우 유효하게 적용될 수 있다는 가능성이 입증되었다.

• 한국기계가공학회지
• /
• 제14권3호
• /
• pp.15-20
• /
• 2015

After the US government declared 3D printing technology a next-generation manufacturing technology, there have been many practical studies conducted to expand 3D printing technology to manufacturing technologies, called AMERICA MAKES. In particular, the Keck Center, located at the University of Texas at El Paso, has studied techniques for easily combing the 3D stacking process with space mobility and expanded these techniques to simultaneous staking techniques for multiple materials. Additionally, it developed convergence manufacturing techniques, such as direct inking techniques, in order to produce a module structure that combines electronic circuits and components, such as CUBESET. However, in these studies, it is impossible to develop a unified system using traditional independent through simple sequencing connections. This is because there are many problems in the integration between the stacking modeling of 3D printers and post-machining, such as thermal deformations, the precision accuracy of 3D printers, and independently driven coordinate problems among process systems. Therefore, in this paper, the integration method is suggested, which combines these 3D printers and subsequent machining process systems through an Internet-based cloud. Additionally, the sequential integrated system of a 3D printer, an NC milling machine, machine vision, and direct inking are realized.

• 한국소음진동공학회논문집
• /
• 제23권1호
• /
• pp.84-91
• /
• 2013

Ultrasonic flip-chip bonding needs a precise bonding tool which delivers ultrasonic energy into chip bumps effectively to use the selected resonance mode and frequency of the horn structure. The bonding tool is excited at the resonance frequency and the input and output ports should locate at the anti-nodal points of the resonance mode. In this study, we propose new design method with topology optimization for ultrasonic bonding tools. The SIMP(solid isotropic material with penalization) method is used to formulate topology optimization and OC(optimal criteria) algorithm is adopted for the update scheme. MAC(modal assurance criterion) tracking is used for the target frequency and mode. We fabricate two prototypes of ultrasonic tools which are based on 3D optimization models after reviewing 2D and 3D topology optimization results. The prototypes are satisfied with the ultrasonic frequency and vibration amplitude as the ultrasonic bonding tools.

• 대한한의진단학회지
• /
• 제12권2호
• /
• pp.1-7
• /
• 2008

Objectives: The basis research of aged people's healthcare technology is very important, because our nation goes into an aged society rapidly. Especially in traditional medicine, pulse shapes of aged people were supposed to weak and empty pulse until now, but any objective measurement and compare research do not taken. Methods and Results: Therefore in this study we design observation study to find characteristic of pulse between younger group (age $20{\sim}30$) and elder group (age $43{\sim}80$) in Busan area. We used 3-dimensional pulse analyzer '3-D MAC' (Daeyomedi Co., Ltd.). And major parameters for comparison are 1) pulse height (h1), 2) applied pressure, 3) pulse power (energy), 4) high pressure duration (w) and 5) R-AI. Conclusions: According to analysis result, elder people's pulse has more large value in pulse height, applied pressure and pulse power than younger's that. It reveals that elder people in modernized lifestyle has Yang symptoms as well Yin symptoms. Consequently we need new method to care elder people's health, and this means more important direction than old text book. From now on verification research with objective diagnosis device like 3-D MAC, must be activated to build of evidence in traditional medicine. Cause traditional medicine's spirit of care and prevention is suitable to care elder people's cardiac and cerebral vascular disease those are have close relation with elder people.

• Kyungpook Mathematical Journal
• /
• 제45권1호
• /
• pp.45-53
• /
• 2005

A basis of the cycle space C (G) is d-fold if each edge occurs in at most d cycles of C(G). The basis number, b(G), of a graph G is defined to be the least integer d such that G has a d-fold basis for its cycle space. MacLane proved that a graph G is planar if and only if $b(G)\;{\leq}\;2$. Schmeichel showed that for $n\;{\geq}\;5,\;b(K_{n}\;{\bullet}\;P_{2})\;{\leq}\;1\;+\;b(K_n)$. Ali proved that for n, $m\;{\geq}\;5,\;b(K_n\;{\bullet}\;K_m)\;{\leq}\;3\;+\;b(K_n)\;+\;b(K_m)$. In this paper, we give an upper bound for the basis number of the semi-strong product of a bipartite graph with a cycle.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.151.1-151
• /
• 2003

Chinese yam(D. opposita Thunb. cv. Jang-Ma) plants showing necrotic mosaic symptom were collected from their growing fields in Andong, Korea. Electron microscoptic examination of negatively stained preparations showed filamentous particles of 660nm in length. The virues purified partially were used to isolate Viral RNA as template for RT-PCR to amplify the CP gene with ChYNMV specific and oligo dT primers. Amino acids sequeces revealed that the viruses shared 99.3％ similarity with ChYNMV(AB044386) which was known as the member of macluravirus. So the viruses from Chinese yam(D. opposita Thunb. cv. Jang-Ma) plants were identified as ChYNMV. Comparing the amino aced sequences of ChYNMV strains with other macluraviruses such as CdMV, NLV and MacMV revealed that N-terminal was the most variable region and conserved regions were present within the genus Macluravirus.

• 전력전자학회지
• /
• 제9권2호
• /
• pp.26-30
• /
• 2004

전력전자 분야에서 사용되는 전동기 제어 시스템 또는 UPS, 능동필터 등 반도체 전력회로 제어에 다양한 신호처리와 고속연산이 가능하도록 하드웨어적으로 부동소숫점을 연산하거나 MAC 연산 기능 등이 있어 계산 속도가 빠르다는 장점 때문에 TMS320C3X등의 DSP가 많이 사용되어 왔다. 그런데 DSP는 입/출력 기능이 상당히 떨어지므로 외부에 A/D 변환기, EPLD 또는 FPGA 등의 외부소자 들이 많이 필요하여 회로가 상당히 복잡하다는 문제가 있었다. 이에 비하여 마이크로제어기는 입/출력 기능이 우수하나 연산속도가 상당히 떨어진다는 단점이 있다.(중략)