• 한국의류산업학회지
• /
• 제21권5호
• /
• pp.627-639
• /
• 2019

This study analyzes differences between the results of 3D direct measurements and automated measurements for Korean elderly females according to age groups, side somatotype, and BMI groups. This study compares the measurement differences of the direct and the 3D automated measurements for women between the ages of 70 to 85, according to age group, BMI group, and side somatotype. A comparison of the results of the direct measurement and the 3D automated measurements for elderly women show that a meaningful discrepancy exists for 29 items out of 33 items. Furthermore, the results of comparing the average error tolerance recommended by ISO20685 shows that 30 items out of 33 items exceeded ISO recommendations. The results of the automated measurement program shows a higher degree of accuracy for straight postures; however, this unsuitable for postures of elderly women with a changed somatotype. The analysis results of the measurement difference indicate the suitability of the automatic measurement programs is found to be high for stood postures, while problems seem to exist on several items along with an automated program is not appropriately used due to posture and part of body changes for elderly women. Therefore, it is recommended to develop an algorithm, that reflects the body changes of elderly women first and then upgrade the automated program equipped with a measurement size method. It is hoped that the study results can be utilized as base data for improving the automated measurement program.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.116-119
• /
• 2010

In this work, we presented the characterization of 3 dB branch type directional couplers by using High-Tc superconducting thin films. To do this, we deposited YBCO superconducting thin films on MgO substrates by using rf-magnetron sputtering techniques. The designed center frequency was 408 MHz and the designed passband was 20 MHz. Also we designed 3 dB Power difference and $90^{\circ}$ of phase difference between port 3 and port 4. The even and odd mode analysis were used to characterize our directional couplers and em Sonnet (full wave analysis program) was utilized to the optimum design. We reported experimental results, including a center frequency, passband, half power characteristics and phase differences. We confirmed that experimental results were in good agreements with characterization by using full wave analysis program.

• 대한수학교육학회지:수학교육학연구
• /
• 제16권4호
• /
• pp.345-366
• /
• 2006

본 연구에서는 3차원 공간도형의 학습에 유용한 동적 기하 소프트웨어인 Cabri3D 프로그램을 논의의 대상으로 하여 이를 공학적도구의 교육적 활용이라는 관점에서 수학 문제해결지도에 바람직하게 사용하는 방안에 대하여 살펴보았다. 예비수학교사들을 대상으로 학교수학에의 Cabri3D프로그램 활용에 관한 탐구 수업을 진행한 후, 중등수학의 지도에서 문제해결력 신장을 위해 이 프로그램이 효과적으로 활용될 수 있는 구체적인 사례들을 수집하였다. 폴리아가 제시하는 문제해결의 각 단계에 Cabri3D가 보조도구로서 유용한 역할을 할 수 있는 문제 사례와 그 활용방법을 예시하면서 현장의 수학교사들이 공학적 도구를 수학교육에 활용하는 방법에 대한 바람직한 관점을 갖게 하는데 도움을 주고자 하였다.

• 기술혁신연구
• /
• 제12권1호
• /
• pp.161-188
• /
• 2004

The objective of this research is to evaluate the Creative Research Initiative Program (CRI), a national R＆D program funded by the Ministry of Science ＆ Technology in Korea. The evaluation of CRI covers the following research questions; 1) Have it set a unique position and characteristic distinguished from other government-funded R＆D programs\ulcorner 2) Are the achievements of the program relevant to its goal\ulcorner 3) What is its performances and how much is it achieved its goal\ulcorner The results are the followings; 1) CRI is perceived as a pure basic research, distinguished from other national basic research programs, such as the Coal Oriented Basic Research Program and the SRC and ERC. 2) CRI is a well-adapted R＆D program in confront of the environmental changes and R＆D needs, as well as follows the planned R＆D areas. 3) CRI have performed well in the raising-up world-class research leaders and the nation-wide diffusion of creative R＆D culture, while it got few performances in the overcoming the limitation of the existing technologies and the independent development of original key technologies for future industries. However, the duration of the program, 5 year, is too short to expect concrete outcome, such as creating original technologies. Many of the outcomes of CRI gets a lot of attention from top class scientists in the world, it is expected to generate various R＆D performances in the future.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.347-351
• /
• 2010

In this paper, our effort to apply 3-D Virtual Reality system for stereoscopic visualization of flow data is briefly described. This study is an extension of our previous and on-going research efforts to develop DATA(Data Analysis and Visualization Application) program, which is a data visualization program developed by using Qt as GUI development environment and OpenGL as graphic library. The program is developed upon the framework of object-oriented programming and it was originally developed by using Qt 3.3.3 environment. In this research the program is converted into a Qt 4.3.3-compatible version, and this new version is developed on Visual Studio 2005. And to achieve a stereoscopic viewing capability, two graphic windows are used to render its own viewing image for the lift and right eye respectively. These two windows are merged into one image using 3D monitor and the viewers can see the data visualization results with stereoscopic depth effects by using polarizing glasses. In this paper three dimensional data visualization with stereoscopic technique combined with 3D Monitor is demonstrated, and the current achievement would be a good start-up for further development of low-cost high-quality stereoscopic data visualization system.

• ETRI Journal
• /
• 제5권3호
• /
• pp.9-15
• /
• 1983

본 연구에서는 MIL-HDBK-2l7D의 Part stress 해석방법을 이용하여 부품의 고장률을 계산하였다. 이 방법은 운용시 주위환경, 주위온도에 의한 stress등 많은 양의 자세한 정보가필요하다. 본고에서는 part stress 방법을 적용한 컴퓨터 프로그램을 개발하여 부품의 고장률 계산에 이용하였다. Fortran V로 쓰여진 이 프로그램은 다음의 4개 부분으로 구성되었고 그 기능및구조를 제시하였다. (1) Raw data file (2) 부품별 연산 프로그램 (3) 신뢰도 modelling (직렬구조) (4) New data file

• 한국지진공학회논문집
• /
• 제19권5호
• /
• pp.229-238
• /
• 2015

For small-size reinforce-concrete buildings, Midas Gen, OpenSees, and Perform-3D, which are structural analysis programs that are most popularly used at present, were applied for nonlinear static pushover analysis, and then difference between those programs was analyzed. Example buildings were limited to 2-story frames with irregular shaped walls. Analysis result showed that there were more differences than for frames only and frames with rectangular walls, but it was not so significant. Nevertheless, the capacity curve were different in some buildings, which is attributed to shape and location of walls, and feature of the analysis program. Especially, selection of automatic or manual input in Midas Gen, or nonlinear wall elements in Perform3D can affect the capacity curve and performance of the buildings. Therefore, the program users should understand the feature of the program well, and then conduct performance assessment. The result of this study is limited to low-story buildings so that it should be noted that it is possible to get different results for mid- to high-rise buildings.

• 한국지반공학회논문집
• /
• 제36권7호
• /
• pp.5-14
• /
• 2020

간사이 공항은 1994년 9월에 개항하였다. 제 1기섬 완공 후 26년이 지났지만 여전히 장기침하가 진행되고 있다. 이 침하는 Pleistocene층에서 발생하고 있다. 계속적으로 변하는 수평방향으로의 지층두께 및 세립분의 함유량이 달라 Pleistocene 모래층의 투수성을 결정하는 것이 쉽지 않기 때문이다. 또한 인접한 제 2기섬의 건설에 따른 지반의 상호거동을 예측에 대한 어려움도 존재한다. 이 문제를 해결하기 위해서, 인접한 두 매립 섬의 건설에 따른 교차하는 Pleistocene 지반의 상호거동을 포함한 장기변형을 평가하기 위해 탄점소성을 고려한 2차원 유한요소해석이 수행되었다. 일반적으로 2차원해석은 한 개의 단면이 전체 단면을 대표할 수 있을 때 사용이 가능하다. 하지만 간사이공항은 매립에 의한 인공섬으로서 2차원 해석으로는 섬의 코너(corner) 부분의 응력 변형문제에 적용할 수 없으며, 물리탐사를 통한 실제 하부지반의 구조도 불균질하며 그 두께 또한 일정하지 않아 2차원해석만으로는 한계가 있다. 즉, 3차원 해석이 강력히 요구된다. 이러한 요구에 의해 본 저자는 탄점소성 해석이 가능한 기존의 2차원 프로그램을 3차원으로 확장하였으며, 1차원 압밀해석해을 통해서 개발한 3차원 프로그램의 검증(verification)을 완료하였다. 본 논문은 검증을 마친, 개발한 3차원 프로그램의 유효성을 입증하기 위해서, 2차원 프로그램을 이용한 기존의 연구와 동일한 해석조건으로 해석을 수행하여, 해석결과를 2차원 결과와 실제 계측값과 비교함으로서 개발한 3차원 수치해석프로그램의 유효성을 입증(demonstration)하였다.

• 패션비즈니스
• /
• 제16권4호
• /
• pp.137-151
• /
• 2012

This study aims to use the avatar sizing system of the 3D apparel CAD program instead of the existing 3D body scanners, and to commercialize 3D personal avatars. Towards these ends, the study examined a difference between a 3D avatar and actual body was determined to verify the 3D avatar sizing system. For the experiment, three subjects were selected, were measured as they were, and were made to undergo 3D body scanning and photographing. Then, using avatar sizing system on the 3D apparel CAD program, three types of virtual bodies, namely 3D avatars. The 3D avatar and actual body measurements were compared, and 3D avatars and 3D body-scanned shapes were likewise compared. As a result, the three types of actual bodies and their 3D avatars that were created based on the sizing system of the 3D apparel CAD program were overall similar. but, the thin body-YY type and the normal body-A type were different from their avatars. In the case of type B, who had a bulging abdomen, the 3D avatar was bigger than the actual body as measured. Also, in all body shapes, the girths around the chest, waist and abdomen were produced with exaggerated muscular amounts compared to their actual muscular amounts.

• 한국정보통신학회논문지
• /
• 제19권1호
• /
• pp.244-250
• /
• 2015

국방과 관련하여 주어진 임무를 수행하는 전투 시스템은 외부 위협에 의한 피해를 회피하여야 하며, 만약 피해를 입더라도 이를 최소화시켜 계속적인 임무 수행이 가능해야 한다. 이러한 이유로 외부 위협에 대한 전투 시스템의 취약점을 분석하고, 이를 개선하여 전투 시스템의 생존성을 향상시키기 위한 목적의 모델링 및 시뮬레이션 기반의 연구가 진행되고 있다. 본 논문에서는 전투 시스템 생존성 분석을 위하여 3차원 관통 해석 프로그램을 개발하는 것에 관한 내용을 다룬다. 이를 위해, 전투 시스템 중 전차를 대상으로 외부 위협과 방호 성능에 따른 관통 해석식을 적용하였다. 실험을 위하여 3차원 CAD 기반으로 전차를 단순화하여 모델링하고, 시나리오에 따른 실험을 통해 개발한 프로그램이 설정된 장갑과 외부 위협의 속성에 따른 관통 해석 및 결과의 시각화가 가능함을 보였다.