DOI QR코드

DOI QR Code

A Comparative Analysis of the Different between CLO 3D Avatar Sizing and Actual Body Measurement Shapes

CLO 3D 아바타 사이징과 실제인체간의 치수 및 형태 차이 비교 분석

  • Lee, Min-Jeong (Dept. of Clothing and Textiles, Sookmyung Women's University) ;
  • Sohn, Hee-Soon (Dept. of Clothing and Textiles, Sookmyung Women's University)
  • 이민정 (숙명여자대학교 의류학과) ;
  • 손희순 (숙명여자대학교 의류학과)
  • Received : 2012.07.24
  • Accepted : 2012.08.27
  • Published : 2012.09.30

Abstract

This study aims to use the avatar sizing system of the 3D apparel CAD program instead of the existing 3D body scanners, and to commercialize 3D personal avatars. Towards these ends, the study examined a difference between a 3D avatar and actual body was determined to verify the 3D avatar sizing system. For the experiment, three subjects were selected, were measured as they were, and were made to undergo 3D body scanning and photographing. Then, using avatar sizing system on the 3D apparel CAD program, three types of virtual bodies, namely 3D avatars. The 3D avatar and actual body measurements were compared, and 3D avatars and 3D body-scanned shapes were likewise compared. As a result, the three types of actual bodies and their 3D avatars that were created based on the sizing system of the 3D apparel CAD program were overall similar. but, the thin body-YY type and the normal body-A type were different from their avatars. In the case of type B, who had a bulging abdomen, the 3D avatar was bigger than the actual body as measured. Also, in all body shapes, the girths around the chest, waist and abdomen were produced with exaggerated muscular amounts compared to their actual muscular amounts.

Keywords

References

  1. 이민정, 손희순(2012. 4. 28), "3D 어패럴 CAD 시스템의 아바타 사이징 비교분석 II), 한국패션비즈니스학회 춘계학술대회 발표논문집, p.57.
  2. Lee, W. S., Magnenat-Thalmann N.,(2001. 7. 4), "Virtual Body Morphing", Proceeding of 14th Annul. Computer Animation Conference, pp.158-166.
  3. Magnenat-Thalmann N., Seo H. W. and Cordier F.(2004), "Automatic Modeling of Virtual Humans and Body Clothing", Journal of Computer Science and Technology, 19(5), pp.575-584. https://doi.org/10.1007/BF02945583
  4. Nagnenat-Thalmann N.(2010), Modeling and Simulating Bodies and Garments(1st ed), London: Springer-Verlag, pp.1-159
  5. 여영인, 서혜원, 원광연(2005), "이미지 입력을 이용한 3차원 아바타의 데이터기반 생성 기법", 한국컴퓨터종합학술대회 논문집, 32(1A), pp. 682-684.
  6. 김기현 外(2007), "맞춤양복 제작을 위한 인체치수 측정 시스템 개발". 한국콘텐츠학회 종합학술대회 논문집, 5(1), pp.16-20.
  7. 임지영(2010), "중년여성의 상반신 비만유형 분석 및 3D 가상모델 제작", 자연과학, 21(1), pp.67-81.
  8. Lee, M. J., Sohn, H. S., Ko, H. S.(2011. 10. 24), "Analysis of 3D Body Sizing in 3D apparel CAD System", Proceeding of International Textiles and Costume Congress, pp.230-231.
  9. 임호선, Istook Cynthia L.(2011), "가상아바타에 따른 가상의복의 비교평가", 복식문화 연구, 19(6), pp.1359-1371.
  10. 이민정(2012), "남성정장 MTM 시스템 구현을 위한 3D 아바타 사이징과 가상 피팅 기술 연구", 숙명여자대학교 박사학위논문, p. 67.
  11. 이민정(2012), "남성정장 MTM 시스템 구현을 위한 3D 아바타 사이징과 가상 피팅 기술 연구", 숙명여자대학교 박사학위논문, pp.68-70.
  12. 이민정(2012), "남성정장 MTM 시스템 구현을 위한 3D 아바타 사이징과 가상 피팅 기술 연구", 숙명여자대학교 박사학위논문, p.74, 표 재구성.
  13. 이민정(2012), "남성정장 MTM 시스템 구현을 위한 3D 아바타 사이징과 가상 피팅 기술 연구", 숙명여자대학교 박사학위논문, p.106, 표 재구성.
  14. 박창규(2004), "의류 패션산업에서의 3차원 및 디지털 응용기술의 현황", 패션정보와기술, 1(1), pp.99-100.
  15. 박창규(2008), "건국대학교 i-Fashion의류기술센터", 한국의류산업학회지, 10(7), p.407.
  16. 산업자원부 기술표준원(편)(2010), 제6차 한국인 인체치수 3차원형상측정 조사사업 최종보고서 및 부록, pp.1-204.
  17. "제6차 한국인 인체치수조사", (2011.1), SizeKorea, 자료검색일 2011. 1. 15, 자료출처 http://www.sizekorea.kats.go.kr
  18. "CLO 3D v.3.22", (2011. 1), 클로버추얼패션, 자료검색일 2011. 1. 10, 자료출처 http://www.clo.co.kr
  19. "i-Fashion", (2010. 2), i-Fashion 의류기술센터, 자료검색일 2011. 3. 20, 자료출처 http://www.ifashion.or.kr

Cited by

  1. A Study on Sociocultural Attitudes and Appearance Management Behavior in accordance with Gender Role Identity vol.16, pp.3, 2012, https://doi.org/10.12940/jfb.2012.16.3.107
  2. Development of Ergonomic Pattern for Motorcycle Pants Using 3D Virtual Clothing vol.25, pp.2, 2016, https://doi.org/10.5934/kjhe.2016.25.2.207
  3. An Analysis of Women's Somatotype and Virtual Fitting Model Size for the Development of Virtual Fitting Models for Consumer vol.40, pp.5, 2016, https://doi.org/10.5850/JKSCT.2016.40.5.894
  4. Analysis on the Face Shape Classification of Korean Female Elementary Students -Developing the Standard Face Measurement for Making 3D Character- vol.24, pp.None, 2012, https://doi.org/10.17246/jkdk.2012..24.014
  5. 실버 의류산업 활성화를 위한 노년 비만여성의 토르소 원형 연구 - CLO 3D 가상착의 시스템 활용 - vol.25, pp.4, 2012, https://doi.org/10.7741/rjcc.2017.25.4.476
  6. 여자 청소년용 가상모델 개발을 위한 체형구분 및 설계방법 연구 vol.41, pp.6, 2012, https://doi.org/10.5850/jksct.2017.41.6.1109
  7. A study on 3D virtual body formation and deformation by body shape analysis vol.31, pp.6, 2012, https://doi.org/10.1108/ijcst-09-2018-0121
  8. Standardization of the size and shape of virtual human body for apparel products vol.6, pp.1, 2012, https://doi.org/10.1186/s40691-019-0187-z
  9. 온라인 피팅서비스 디자인 연구 -인터페이스 디자인을 중심으로 vol.12, pp.2, 2012, https://doi.org/10.15207/jkcs.2021.12.2.147
  10. 거북목 증후군 체형의 20대 여성의 상의 원형패턴 개발 vol.25, pp.3, 2021, https://doi.org/10.12940/jfb.2021.25.3.144