• Journal of Environmental Science International
• /
• v.8 no.1
• /
• pp.95-100
• /
• 1999

Process intensification without any increase in bed requires the exploitation of fluid mechanical phenomena as the basis for elegant solutions to the process engineering problems which result from the need to retain and control the immobilized biomass, and for biomass recovery. The fluidized bed biological reactor provides a solution to these needs. The wastewater treatment characteristics of the fluidized bed was filled with sand media. Indirect aeration were studied experimentally. The researcher was filled with sand particle size(0.60~0.42mm) in three reactors with different section area(A)/height(H), in the state BOD loading 4.5kg-$BOD_5/m^3$ㆍd, and under the fixed state of hydraulic retention time for around 32 minutes.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.482-487
• /
• 2005

In the most current Turn-key bidding and Alternative design, is going to establish maintenance plan along with a economical assessment (VE/LCC assessment etc). Generally, establishment of maintenance plan is based on past experiences that are decided upon sensor position and amount with analytic or mechanical control section. But, it is more reasonable that maintenance plan based on level of significance for Probabilistic Risk, with presuming damage probability assessment of structural fracture scenarios. Therefore, in this study it is considered about the technique that an improved maintenance plan of railroad structures using PRA (Probabilistic Risk Assessment) on the basis of structural reliability theory. For this, in the paper, Preventive maintenance plan based on PRA is suggested with an application example of Pansong-Line (Line number 3) railway in Pusan works that actually executed Turn-key design.

• Toxicological Research
• /
• v.9 no.1
• /
• pp.99-105
• /
• 1993

LBD-007, a newly developed recombinant human interferon alphaA, was at dose levels of 0.3 $\times$$10^6$ , 6 $\times$ $10^6$ and 12 $\times$ $10^6$ IU/kg/day administered subcutaneously to pregnant New Zealand White rabbits during the organogenetic period. Cyclophosphamide was used as a positive control. All pregnant females were subjected to the caesarean section on day 28 of pregnancy. Effect of test substance on dams and embryonal development of fetuses were examined. 1. No treatment-related changes in clinical signs, food consuption, body weight and necropsy findings of dams were observed.

• International Journal of Korean Welding Society
• /
• v.3 no.2
• /
• pp.29-39
• /
• 2003

The durability and reliability of thermal barrier coatings (TBCs) play an important role in the service reliability, availability and maintainability (RAM) of hot­section components in advanced turbine engines for aero and utility applications. Photostimulated luminescence spectroscopy (PSLS) and electrochemical impedance spectroscopy (EIS) are being concurrently developed as complimentary non­destructive evaluation (NDE) techniques for quality control and life­remain assessment of TBCs. This paper overviews the governing principles and applications of the luminescence and the impedance examined in the light of residual stress, phase constituents and resistance (or capacitance) in TBC constituents including the thermally grown oxide (TGO) scale. Results from NDE by PSLS and EIS are discussed and related to the microstructural development during high temperature thermal cycling, examined by using a variety of microscopic techniques including focused ion beam (FIB) in­situ lift­out (INLO), transmission and scanning transmission electron microscopy (TEM and STEM).

• Parasites, Hosts and Diseases
• /
• v.56 no.4
• /
• pp.341-349
• /
• 2018

The infection status of Centrocestus armatus metacercariae (CaMc) was broadly surveyed in freshwater fishes from major river systems in the Republic of Korea (Korea) during 2008-2017. A total of 14,977 fishes was caught and examined by the artificial digestion method. CaMc were detected in 3,818 (97.1%) (2,114 Z. platypus: 96.1% and 1,704 Z. temminckii: 98.4%) out of 3,932 Zacco spp. examined and their density was 1,867 (2,109 in Z. platypus and 1,567 in Z. temminckii) per fish infected. The prevalences with CaMc were high, 93.7-100%, in Zacco spp. from all surveyed areas. However, their densities were more or less different by the surveyed areas and fish species. They were most high in Nakdong-gang in Gyeongsangnam-do (4,201 in average), and followed by Geum-gang (2,343), Nakdong-gang in Gyeongsangbuk-do (1,623), Han-gang (1,564), Tamjin-gang and Yeongsan-gang (1,540), streams in the east coast (1,028), Seomjin-gang (488) and Mangyeong-gang (170). In another species of rasborinid fish, Opsariichthys uncirostris amurensis, CaMc were detected in 222 (74.8%) out of 297 ones examined and their density was 278 (1-4,480) per fish infected. CaMc were also detected in total 41 fish species except for the rasborinid fish, Z. platypus, Z. temminckii and O. uncirostris amurensis. Conclusively, it was confirmed that among the 3 species of rasborinid fish, Z. platypus and Z. temminckii are highly prevalent and O. uncirostris amurensis is moderately prevalent with CaMc. Additionally, we could know that variety of fish species act as the second intermediate hosts of C. armatus in Korea.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1623-1628
• /
• 2004

In the 3-dimensional cyclic Lotka-Volterra equations, we show the solution on the invariant hyperplane. In addition, we show the existence of the invariant hyperplane by the center manifold theorem under the some conditions. With this result, we can lead the hyperplane of the n-dimensional cyclic Lotka-Volterra equaions. In other section, we study the 3- or 4-dimensional Hamiltonian Lotka-Volterra equations which satisfy the Jacobi identity. We analyze the solution of the Hamiltonian Lotka- Volterra equations with the functions called the split Liapunov functions by [4], [5] since they provide the Liapunov functions for each region separated by the invariant hyperplane. In the cyclic Lotka-Volterra equations, the role of the Liapunov functions is the same in the odd and even dimension. However, in the Hamiltonian Lotka-Volterra equations, we can show the difference of the role of the Liapunov function between the odd and the even dimension by the numerical calculation. In this paper, we regard the invariant hyperplane as the important item to analyze the motion of Lotka-Volterra equations and occur the chaotic orbit. Furtheremore, an example of the asymptoticaly stable and stable solution of the 3-dimensional cyclic Lotka-Volterra equations, 3- and 4-dimensional Hamiltonian equations are shown.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.250-255
• /
• 2003

The position of a 3-dimensional(3D) point can be measured by using calibrated stereo camera. To obtain more accurate measurement ,more accurate camera calibration is required. There are many existing methods to calibrate camera. The simple linear methods are usually not accurate due to nonlinear lens distortion. The nonlinear methods are accurate more than linear method, but it increase computational cost and good initial guess is needed. The multi step methods need to know some camera parameters of used camera. Recent years, these explicit model based camera calibration work with the development of more precise camera models involving correction of lens distortion. But these explicit model based camera calibration have disadvantages. So implicit camera calibration methods have been derived. One of the popular implicit camera calibration method is to use neural network. In this paper, we propose implicit stereo camera calibration method for 3D reconstruction using support vector machine. SVM can learn the relationship between 3D coordinate and image coordinate, and it shows the robust property with the presence of noise and lens distortion, results of simulation are shown in section 4.

• The korean journal of orthodontics
• /
• v.27 no.4 s.63
• /
• pp.559-568
• /
• 1997

For orthodontic tooth movement, optimal orthodontic force should be maintained without periodontal breakdown and alveolar bone should be remodeled physiologically Therefore, To obtain proper occlusion through tooth movement within alveolar bone, we should know the biomechanics of teeth and supporting 4issues. The present study was performed to observe histologic changes of periodontal tissue immediately after application of orthodontic force and during the retention period in growing young adult dogs. In this study, experimental group contained between mandibular left canine and 1st molar and control group contained contralateral teeth of same animal. The .018'x.022' stainless steel closed coil spring(Dentaurum Co.) was ligated on the experimental teeth at initial 200gm-force from mandibular canine to 1st molar The animals(4 to 6 months aged young adult dogs) were sacrificed on 0, 14, 28 days after the finish of appliance activation, and then tissue samples were divided into hematoxylin-eosin(HE) staining section, ground section, alkaline phosphatase(ALP) staining section, and tartrate-resistant acid phosphatase(TRAP) staining section. Thereafter, the preparations were examined under light microscopy The following results were obtained: 1. Immediately after the finish of appliance activation, the periodontal space was increased in tension side, but decreased in pressure side compared to that of control. The hyalinized zone was also observed in the periodontium. 2. After the 14-day retention, peridontal space was decreased in tension side and slightly increased in pressure side compared to that of immediately after the finish of appliance activation. The hyalinized zone was repaired and a few osteoblasts showing slightly new bone formation were seen. Osteoblasts were scarcely observed along the alveolar bone. 3. Aftter the 28-day retention, the periodontal fibers are normally repaired. A lot of TRAP(+) osteoclasts md increased alveolar bone resorption were observed in pressure side, and AP(+) osteoblast and increased new bone formation were observed in tension side.

• Journal of Veterinary Clinics
• /
• v.31 no.2
• /
• pp.85-89
• /
• 2014

Arterial thromboembolism (ATE) is a common and fatal complication of hypertrophic cardiomyopathy (HCM) in cats. Therefore in this study, we evaluated the hypercoagulability (using plasma concentration of D-dimer) in HCM cats with different stage of heart failure and left atrial enlargement and also investigated the any correlation with echocardiographic indices (including left free wall thickness at diastole, interventricular septal thickness at diastole, LA to Ao ratio, heart failure stage, existence of systolic anterior motion of mitral valve). The median plasma D-dimer concentration in this study population was $0.51{\pm}0.70$ (range 0 to 2.50) ug/mL in the control group, $1.47{\pm}1.29$ (range 0.3 to 5.79) ug/mL in the HCM group, $1.48{\pm}1.65$ (range 0.3 to 5.79) ug/mL in the ISACHC I group, $1.62{\pm}0.4$ (range 1.31 to 2.07) ug/mL in the ISACHC II group, $1.36{\pm}0.91$ (range 0.3 to 2.31) ug/mL in the ISACHC III group, $1.90{\pm}1.60$ (range 0.3 to 5.79) ug/mL in the cat with LA dilation, $1.72{\pm}0.72$ (range 0.6 to 2.31) ug/mL in cats with SEC-T, $1.19{\pm}0.70$ (range 0.3 to 2.31) ug/mL in the cats with SAM, and $1.63{\pm}0.80$ (range 0.6 to 2.31) ug/mL in the cats with ATE. Our study found the median and mean concentration of plasma D-dimer was higher in cat with HCM, ATE, SECT and SAM and clearly provides evidence of hypercoagulability in cats with HCM, although the severity was not correlated to the dilation of LA and the presence of heart failure. This is the first study evaluating the hypercoagulability in cats with HCM in Korea.

• Journal of the Korean Society for Railway
• /
• v.17 no.3
• /
• pp.171-177
• /
• 2014

PWM converter trains exhibit excellent load characteristics in comparison with conventional phase-controlled trains with low power factors, as they can be operated at power factors which are close to unity by means of a voltage vector control method. However, in the case of a high track density or extended feeding, significant line losses and voltage drops can occur. Instead of operating these trains at a fixed unity power factor, this paper suggests a continuous optimal power factor control scheme for each train in an effort to minimize line losses and improve voltage drops according to varying load conditions. The proposed method utilizes the steepest descent algorithm targeting each car in the same feeding section to establish the optimized reactive power compensation levels that can minimize the reactive power loss of the feeder. The results from a simulation of a sample system show that voltage drops can be improved and line losses decreased.