• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.2
• /
• pp.27-39
• /
• 1992

3 Dimensional measurement system using camera and laser slit-ray is studied. Precise calibration technique in this system is suggested. Calibration is accomplished with calibration die, calibration block and robot. For obtaining calibration parameters, the equations are solved using least square error method from a great many calibration points to reduce measuring error. Continuous measurement is possible for the object which is larger than one frame of camera. The efficiency and usability are proved by applying to the tire profile measuring system which measures tire profile using robot and this system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.5
• /
• pp.973-979
• /
• 2007

A laser vision system is developed to measure the three-dimensional feature of an object. This system consists of two low cost cameras and a cross laser. One camera and a cross laser are used to measure a plane equation of an object. Using this information, the other camera measures a hole size of an object. The proposed system provides 0.05 mm accuracy measurement systems with relatively low cost.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.10
• /
• pp.1011-1016
• /
• 2015

Gas piping systems in power plants and factories are always influenced by the mechanical vibrations of rotational machines such as pumps, blowers, and compressors. Unusual vibrations in a gas piping system influence possible leakages of liquids or gases, which can lead to large explosive accidents. Real-time measurements of unusual vibrations in piping systems in situ prohibit them from being possible leakages owing to the repeated fatigue of vibrations. In this paper, a non-contact 3-dimensional measurement system that can detect the vibrations of a solid body and monitor its vibrational modes is introduced. To detect the displacements of a body, a stereoscopic camera system is used, through which the major vibration types of solid bodies (such as X-axis-major, Y-axis-major, and Z-axis-major vibrations) can be monitored. In order to judge the vibration types, an artificial neural network is used. The measurement system consists of a host computer, stereoscopic camera system (two-camera system, high-speed high-resolution camera), and a measurement target. Through practical application on a flat plate, the measured data from the non-contact measurement system showed good agreement with those from the original vibration mode produced by an accelerator.

• The Journal of the Korea Contents Association
• /
• v.8 no.2
• /
• pp.91-99
• /
• 2008

When making a comic film, the comic presentation that uses stress and exaggeration is the important subject among other things. In this study we tried to investigate the comic effect using the movement of three-dimensional shot. To conduct this study, we extracted the shot manufactured through the Flow Motion of a 3D Production Program Virtual Camera and a High Speed Motion Picture Camera. The shot manufactured applying this manufacturing skill and using three-dimensional production method for the video contents efficiently made was classified into several scenes. The focus of this study is to search for the factor that makes the atmosphere of a story comic through three-dimensional production shot. According to the shot analysis, three-dimensional production method plays a role in developing more stories on space and time by visualizing stories in three dimensions, which makes the most use of the movement of camera, lens and the utilization of focus. In addition, in the presentation where many comic and exaggerated factors are provided, we used the technology that stresses a scene using the size of a shot and the lasting time and presented the method that exaggerates space using a 3D Production Program Virtual Camera and a High Speed Motion Picture Camera. By reviewing the qualitative improvement and the efficient method on making comic films through the possibility that the atmosphere of this three-dimensional shot can apply to the effect for comic presentation, we tried to approach the comic presentation.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1998.06b
• /
• pp.45-50
• /
• 1998

Several 3 dimensional image display systems were recently developed in Korea. These are a holographic video system based on pulse laser illumination, ad 8-view 3 dimensional image system capable of displaying computer generated 3 dimensional images and multiview 3 dimensional imaging system based on moving aperture and holographic screens of both transmission and reflection types. All these systems require no special glasses to watch and works impressively.

• Journal of information and communication convergence engineering
• /
• v.15 no.3
• /
• pp.193-198
• /
• 2017

In this study, we propose a three-dimensional (3D) visualization technique of occluded objects using integral imaging with a plenoptic camera. In previous studies, depth map estimation from elemental images was used to remove occlusion. However, the resolution of these depth maps is low. Thus, the occlusion removal accuracy is not efficient. Therefore, we use a plenoptic camera to obtain a high-resolution depth map. Hence, individual depth map for each elemental image can also be generated. Finally, we can regenerate a more accurate depth map for 3D objects with these separate depth maps, allowing us to remove the occlusion layers more efficiently. We perform optical experiments to prove our proposed technique. Moreover, we use MSE and PSNR as a performance metric to evaluate the quality of the reconstructed image. In conclusion, we enhance the visual quality of the reconstructed image after removing the occlusion layers using the plenoptic camera.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.7
• /
• pp.633-641
• /
• 2015

In this study, we proposed a three-dimensional (3D) scanning system based on laser-vision technique and rotary mechanism for automatic 3D model reconstruction. The proposed scanning system consists of a laser projector, a camera, and a turntable. For laser-camera calibration a new and simple method was proposed. 3D point cloud data of the surface of scanned object was fully collected by integrating extracted laser profiles, which were extracted from laser stripe images, corresponding to rotary angles of the rotary mechanism. The obscured laser profile problem was also solved by adding an addition camera at another viewpoint. From collected 3D point cloud data, the 3D model of the scanned object was reconstructed based on facet-representation. The reconstructed 3D models showed effectiveness and the applicability of the proposed 3D scanning system to 3D model-based applications.

• Journal of Korea Multimedia Society
• /
• v.7 no.10
• /
• pp.1412-1420
• /
• 2004

This thesis is dealing with conveyer remote monitoring and control system for shoes process formed by client/server, which is based on Web. Modules for watching and controlling images in a remote by client is manufactured under JAVA, and conveyer server for real-time controlling is founded on RTLinux. And device driver and APIs are developed based on it. Through both manufacturing these software and LEGO-based prototyping, it would present the real-time conveyer controlling system founded on Web and 3-dimensional stereo camera to be applied to industrial spots.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.977-980
• /
• 1998

A real-time holography system using LCD with CCD camera is proposed. In this system, the rainbow hologram is used since it can be reconstructed by white light source. And to record on CCD camera, a kind of in-line holography method is used to widen the width of the fringe pattern. The interference fringe pattern by proposed system is detected with CCD camera and transferred to the LCD A 3-dimensional image is reconstructed when a white light source illuminates the LCD. So it can represent 3 dimensional moving images at real-time. In this paper, to confirm the usefulness of the proposed method, the reconstructed image by holographic film is compared to the same reconstruct image by LCD. In the recording of the interferenced processing, the optimal ratio of the reference and object beam intenstiy is also investigated.

• Korean Journal of Optics and Photonics
• /
• v.32 no.1
• /
• pp.22-28
• /
• 2021

We try to extract three-dimensional information, such as the distance from a camera and the actual width and height of an object, from still photographs by a multilens smartphone camera, by means of parallax error. To obtain this information, we develop several formulas and design a method for experimental instrumentation. If the results from this paper were included in algorithms of multilens smartphone cameras, there would be various kinds of applications, such as in the workplace of architectural and civil engineering to obtain an actual dimension, or on a golf course to measure how far away a pin flag is. We expect many more applications of this study, because the multilens smartphone camera is already an important necessity of life.