• Structural Engineering and Mechanics
• /
• v.90 no.3
• /
• pp.313-323
• /
• 2024

Most of existing buildings in Mexico City are made of reinforced concrete (RC), however, it has been shown that they are very susceptible to narrow-band long duration ground motions. In recent years, the use of dual systems composed by Buckling Restrained Braces (BRB) has increased due to its high energy dissipation capacity under reversible cyclical loads. Therefore, in this work the behavior of RC buildings with BRB is studied in order to know their performance, specifically, the energy distribution through height and response transformation factors between the RC and simplified systems are estimated. For this propose, seven RC buildings with different heights were designed according to the Mexico City Seismic Design Provisions (MCSDP), in addition, equivalent single degree of freedom (SDOF) systems were obtained. Incremental dynamic analyses on the buildings under 30 narrow-band ground motions in order to compute the relationship between normalized hysteretic energy, maximum inter-story drift and roof displacement demands were performed. The results shown that the entire structural frames participate in energy dissipation and their distribution is independent of the global ductility. The results let propose energy distribution equations through height. Finally, response transformation factors between the SDOF and multi degree of freedom (MDOF) systems were developed aimed to propose a new energy-based approach of BRB reinforced concrete buildings.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3A
• /
• pp.473-484
• /
• 2006

The capacity spectrum method (CSM) can be used to simply estimate the maximum displacement response of the nonlinear structures. To evaluate seismic performance of multi-span bridges using the CSM, the representative response for structural system should be derived from the multi-degree-of-freedom (MDOF) responses by using the equivalent single-degree-of-freedom (ESDOF) method. The ESDOF method is used to calculate the capacity curve of the structural system from the pushover curves of all piers or structural members estimated by the pushover analysis. In order to evaluate an accuracy of ESDOF methods used in the CSM, the maximum displacements estimated by the CSM incorporating the several ESDOF methods are compared to those by the inelastic time-history analysis for several artificial earthquakes corresponding to the design spectrum.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.6
• /
• pp.27-38
• /
• 2012

In this paper, we introduce CoMP in 3GPP LTE-Advanced Release 11 to take care of shadowing effects appearing in cell-edge areas to meet rapidly increasing demand for high speed transmission and multi-media data. In order to mitigate interference, orthogonalizing is ideal but it is slightly difficult to be applied to real systems. Therefore, interference alignment and avoidance are used in practical applications. Interference alignment is a scheme enabling us to consider interference our friend not enemy. We show lattice codes in Gaussian channel achieve Shannon capacity where strong interference exists. In addition, we show the relationship between channel parameter a and DoF(Degree of Freedom) applying lattice codes to interference alignment for interference channel with three users.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.3
• /
• pp.267-272
• /
• 2012

This paper propose the implementation of robust fuzzy controller for controlling an active magnetic bearing (AMB) system with 6 degree of freedom (DOF). A basic model with 6 DOF rotor dynamics and electromagnetic force equations for conical magnetic bearings is proposed. The developed model has severe nonlinearity and uncertainty so that it is not easy to obtain the control objective. For solving this problem, we use the Takagi-Sugeno (T-S) fuzzy model which is suitable for designing fuzzy controller. The control object in the AMB system enables the rotor to rotate without any phsical contact by using magnetic force. In this paper, we analyze the nonlinearity of the active magnetic bearing system by using fuzzy control algorithm and desing the robust control algorithm for solving the parameter variation. Simulation results for AMB are demonstrated to visualize the feasibility of the proposed method.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.05a
• /
• pp.190-196
• /
• 2004

Thick composite laminated plates is considered in 3D finite-element. To consider continuity of transverse stresses and displacement field, mixed finite-element has been developed by using layerwise theory and the minimum potential energy principle. Mixed finite-element has been enforced through the thick direction, Z, of a laminated plate by considering six degree-of-freedoms per node. Six degree-of-freedoms are three displacement components in the coordinate axes directions and three transverse stress components ${\sigma}_z,\;{\tau}_{xz},\;{\tau}_{yz}$. The model maintain the fundamental elasticity relations that are stress-strain relation and displacement-strain relation, because the transverse stress components invoked as nodal degrees of freedom by using the fundamental elasticity relationship between th components of stress and displacement. Random vibration analysis of the model is performed by computing consistent mass matrix and computing covariance in frequency domain technique.

• International Commerce and Information Review
• /
• v.16 no.3
• /
• pp.121-138
• /
• 2014

China and Korea have interacted with each other for 20 years since 1992 when China and Korea established diplomatic relations. During this period, the trade and investment between two countries have increased rapidly. In addition to the enhancement of economic cooperation and the expansion of personal exchange, the relationship between two countries was upgraded to mutual strategic cooperative relationship in 2008 from the 1 friendly and cooperative relations and the economic exchange and cooperation were largely expanded. In this paper, the current situation and characteristics of the trade between China and Korea were figured out. In order to find out the development direction of China and Korea trade, through empirical analysis, the correlation of decisive factors that influence the trade amount of these two countries were analyzed. In terms of dependent variables for the empirical analysis, the trade amount between China and Korea was considered. While the GDP of these countries, the direct investment amount of two countries and the openness of external trade of these countries were considered as independent variables. The degree of economic freedom of these countries was set as policy variable. According to the analysis results, when the GDP of China and Korea is getting higher, there is positive influence on the trade amount of China and Korea. It is showed that the direct investment of Korea has positive influence on the trade amount of China and Korea. Meanwhile, there is negative influence of China's direct investment on the trade amount. When the degree of freedom of these countries is getting higher, the influence of trade amount was showed significantly. Furthermore, when the economic freedom of these countries is getting higher, the insignificant things about trade amount of China and Korea were extracted as insignificant.

• Journal of Korea Game Society
• /
• v.17 no.3
• /
• pp.107-116
• /
• 2017

Sandbox game users can double their satisfaction by re-creating a variety of play patterns. This creative process is due to the expansion of play through 'customizing' and 'action autonomy'. The purpose of this study is to investigate the structural limitations of freedom of online game. In a standalone game, the scalability due to the degree of freedom gives the user a strong motivation for world persistence. On the other hand, in online sandbox games such as MMORPG, it is confirmed that the goal-oriented tendency to gain advantage is the inherent limit of the freedom and expandability of the sandbox game. In this study, it is suggested that the cause and limit of growth of online-based sandbox game can be offset by the optimal solution factor.

• Structural Engineering and Mechanics
• /
• v.19 no.3
• /
• pp.297-320
• /
• 2005

In recent years the pure displacement formulation for plate elements has not been as popular as other formulations. We revisit the pure displacement formulation for shear-deformable plate elements and propose a family of N-node, displacement-compatible, fully-integrated, pure-displacement, triangular, Mindlin plate elements, MIN-N. The development has been motivated by the relative simplicity of the pure displacement formulation and by the success of the existing 3-node plate element, MIN3. The formulation of MIN3 is generalized to obtain the MIN-N family, which possesses complete, fully compatible kinematic fields, in which the interpolation functions for transverse displacement are one degree higher than those for rotations. General element-level formulas for the thin-limit Kirchhoff constraints are developed. The 6-node, 18 degree-of-freedom element MIN6, with cubic displacement and quadratic rotations, is implemented and tested extensively. Numerical results show that MIN6 exhibits good performance for both static and dynamic analyses in the linear, elastic regime. The results illustrate that the fully-integrated MIN6 element has excellent performance in the thin limit, even for coarse meshes, and that it does not require shear relaxation.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.11a
• /
• pp.166-168
• /
• 2020

MPEG 비디오 그룹은 MPEG-I 표준의 일부로 포인트 클라우드(Point Cloud) 압축을 위한 비디오 기반 포인트 클라우드 부호화(V-PCC)와 몰입형(immersive) 비디오 압축을 위한 MPEG Immersive Video(MIV) 표준을 개발하고 있다. 최근에는 포인트 클라우드 및 몰입형 비디오와 같은 체적형(volumetric) 비디오를 모두 압축할 수 있도록 V-PCC 와 MIV 를 통합한 V3C(Visual Volumetric Video-based Coding) 표준화를 진행하고 있다. 본 논문에서는 V3C 코덱을 사용한 3DoF+(3 Degree of Freedom plus) 비디오 부호화 방안을 분석한다. 또한 V3C 코덱의 2D 코덱으로 기존 HEVC 대신 VVC 를 사용할 경우의 부호화 성능 향상을 분석한다.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.979-986
• /
• 2022

In this study, the virtual exhibition using 3D architectural space was analyzed in terms of the viewer's experience. For this purpose, the analysis items of the virtual architectural space include whether the actual architectural space is reproduced, the introduction of surreal elements, the degree of freedom of movement and circulation, the level of photorealism of spatial expression, the level of reproduction of the exhibits and information provision method, and the interaction with other participants. Six virtual exhibition projects designed by a well-known architect were selected and analyzed. Three directions were found through the analysis. First, even when designing a virtual exhibition space with a high degree of freedom, there is a tendency to present a familiar architectural environment. Second, the current method of creating a virtual architectural space is that the method using a 360-degree rendering image and the method using a game engine coexist with pros and cons. Third, the interaction between participants in the virtual exhibition is implemented only by using a game engine. It is expected that the virtual space production environment using the game engine to be developed will become more advantageous in the future.