• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.2
• /
• pp.147-157
• /
• 2011

Purpose: The present study was conducted to investigate the actual condition of circle lens wear and the differences caused by the pigmentation in blinking rate, non-invasive tear break-up time (NIBUT), and lens surface between circle and soft contact lens wear during clinical application. Methods: Eighty subjects were surveyed to know the actual condition of wearing circle lens. Blink rate, NIBUT of 20 subjects in twenties were measured after separately wearing soft contact lens and circle lens for 5 days. Their lens surfaces were also observed by scanning electron microscope. Results: Fifty percent of circle lens wearers answered that major reason for changing circle lens was discomfort and 67% of answerers wore circle lens more than 6 hours a day. The tendency of increased blink rates in both wearers of circle and soft contact lens at 30 minutes later when tear film stabilized and 3 hour after lens wearing was shown on the 1st, 3rd and 5th day with expanding wearing time. Especially at 3 hours after lens wearing on the 3rd and 5th day, the difference of blink rates was statistically different in circle lens wear and soft contact lens wear. The NIBUTs of soft contact lens wearers and circle lens wearers were 6.0 and 3.7 secs, respectively, at 30 min later on 1st day and were significantly different. NIBUTs of soft contact lens wearers and circle lens wearers were also statistically different 3 hrs after lens wearing on the 1st day and the similar pattern of NIBUTs was shown on the 3rd and 5th day. The roughness of both surfaces in soft contact lens and front surface in circle lens was same. However, pigmented front surface of circle lens was rougher and uneven. Conclusions: As the results, the circle lens wearers might feel discomfort in clinical application since the difference in lens surface of circle lens would change lens wettability during wearing. The difference by tinting contact lens was shown from the result, which could help better wearing circle lens.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.1
• /
• pp.69-73
• /
• 2002

This questionnaire studied the status of wear and care for soft contact lens, of 200students wearing loft contact lens. 50% of man wore soft contact lens, 8 hours and 52% of woman wore soft contact lens 10 hours per a day, 51% of man has worn soft contact lens 3 years 45% of woman has worn soft contact lens 3 year. For the side effects of wearing contact lens 39% of man soft contact lens wearers experienced eye congestion, 72% of woman soft contact lens wearers dryness eyes.

• Wind and Structures
• /
• v.35 no.3
• /
• pp.147-155
• /
• 2022

This research proposes a wind-lens turbine design that can startup and operate at a low wind speed (< 5m/s). The performance of the wind-lens turbine was investigated using CFD and wind tunnel testing. The wind-lens turbine consists of a 3-bladed horizontal axis wind turbine with a diameter of 0.6m and a diffuser-shaped shroud that uses the suction side of the thin airfoil SD2030 as a cross-section profile. The performance of the 3-bladed wind-lens turbine was then compared to the two-bladed rotor configuration while keeping the blade geometry the same. The 3-bladed wind-lens turbine successfully startup at 1m/s and produced a torque of 66% higher than the bare turbine, while the two-bladed wind-lens turbine startup at less than 4m/s and produced a torque of 186 % higher than the two-bladed bare turbine at the design point. Findings testify that adding the wind-lens could improve the bare turbine's performance at low wind speed.

• Journal of The Korean Astronomical Society
• /
• v.36 no.3
• /
• pp.75-80
• /
• 2003

When a bright astronomical object (source) is gravitationally lensed by a foreground mass (lens), its image appears to be located at different positions. The lens equation describes the relations between the locations of the lens, source, and images. The lens equation used for the description of the lensing behavior caused by a lens system composed of multiple masses has a form with a linear combination of the individual single lens equations. In this paper, we examine the validity of the linear nature of the multi-lens equation based on the general relativistic point of view.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.6
• /
• pp.96-101
• /
• 2020

In this paper, we present the results of our research to perform 3D laser scanning functions by adding a focusing lens to a conventional 2D laser scanner. For the optical design, the ray-tracing technique was used along with a total of four lenses as the variable incident focusing lens, the collimating lens, and the F-Theta lens. As design variables, the curvature of the incident focusing lens (Lens #1) was assumed to be us, l mm and sumed mm, and the incident angles were set at 0cidenus, l. In addition, the distance between the focusing lens and the collimating lens was set to vary from 5 mm to 15 mm. When the incident focal length was varied from 5 mm to 15 mm, the exit focal length was calculated to vary from 67.5 mm to 56.8 mm for the lens with R = 100 mm and from 108.5 mm to 99.0 mm for the lens with R = 150 mm. When the incident angle was 0°, the focal aberration was only slightly observable at 10㎛ in both the x- and y-direction. At 7.5° was the focal aberration of approximately 20~50㎛ was measured at 20㎛. To investigate the chromatic aberration of the designed optical device, the distortion of the focus was observed when the 550 nm beam was simulated on lens designed for a 980 nm wavelength.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.8
• /
• pp.494-498
• /
• 2016

In this paper, we proposed the 3-dimenstional (3D) analysis for calculating the optical characteristics of an autostereoscopic display with electric field driven liquid crystal (ELC) lens. From 3D analysis considering the slanting of lens, we calculate the cross-talk of each images and the distortion of viewing zone. Using geometric opics and extended Jones matrix method (EJMM), phase retardation of ELC lens according to position is calcuated and then optical path difference in 3D space considering tilt and azimuth angle of incident light is gotten. Then, intensity distribution is presented in the space. Through camparing the intensity distribution using ideal lens with the ELC lens, we identify the noise and image distortion of ELC lens. As a result, this analysis is expected to provide optimum design conditions for realistic and rigorous 3D display with ELC lens.

• The Journal of the Korea Contents Association
• /
• v.14 no.10
• /
• pp.1-9
• /
• 2014

Generally, integral image used for autostereoscopic 3d display is generated for flat lens array, but flat lens array cannot provide a wide range of view for generated integral image because of narrow range of view. To make up for this flat lens array's weak point, curved lens array has been proposed, and due to technical and cost problem, approximate surface lens array composed of several flat lens array is used instead of ideal curved lens array. In this paper, we constructed an approximate surface lens array arranged for $20{\times}8$ square flat lens in 100mm radius sphere, and we could get about twice angle of view compared to flat lens array. Specially, unlike existing researches which manually generate integral image, we propose an OpenCL GPU parallel process algorithm for generating real-time integral image. As a result, we could get 12-20 frame/sec speed about various 3D volume data from $15{\times}15$ approximate surface lens array.

• Korean Journal of Optics and Photonics
• /
• v.7 no.4
• /
• pp.305-313
• /
• 1996

Lens design method by using equivalent lenses was already introduced, but the method has a limitaion that all lenses should be in the air. Therefore, we often get improper solution in designing cemented lenses. In this study, the lens conversion from thick lens to equivalent lens and its reversal was generalized without any preconditions, and the third order aberration fomulrae were derived for the generalized equivalent lens system. The generalized equivalent lens conversion were applied to typical cemented doublet and triplet, and they show that the third order aberrations of the generalized equivalent lenses have better agreements with their corresponding thick lenses than the previous conversion method.

• Korean Journal of Optics and Photonics
• /
• v.7 no.1
• /
• pp.51-59
• /
• 1996

In this paper, we propose a new type of a planar waveguide lens, a meniscus lens instead of a plano-convex lens used widely for the optical integrated circuits such as optical numerical processors. A plano-convex lens has a spherical aberration caused by the linear boundary. In the proposed meniscus lens, this linear boundary is replaced by a circular-boundary, and the spherical aberration is removed. To test the performance of the proposed lens, a meniscus lens is designed using Fermat principle and fabricated on the Y-cut $LiNbO_3$ substrate. First a $Ti:LiNbO_3$ planar waveguide is fabricated on the $LiNbO_3$ substrate by Ti indiffusion. Then a meniscus lens is fabricated on the planar waveguide by TIPE(Ti indiffued proton-exchange) method. A plano-convex lens is also fabricated on the same substrate to compare the spot size at the focal point. The measured spot size of the meniscus lens is reduced to 59% that of the plano-convex lens. This result shows that the proposed meniscus lens is more effective for optical integrated circuits than the plano-convex lens.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.11a
• /
• pp.124-127
• /
• 2013

2009년 출시된 영화 "AVATAR"가 stereoscopic방식 3D영화로 대단한 성공을 거둔 이후로 가전시장과 필름 시장에는 많은 3D 영상들이 stereoscopic방식으로 제작되어 유통되게 되었다. 하지만 기존에 제시되어온 two lens stereoscopic camera system은 두 대의 카메라를 사용하기 때문에 광학적 정렬과 기하학적 조절이 매우 어렵기 때문에 stereoscopic 영상을 촬영하고 보급 하는데 많은 문제점을 가지고 있었다. 따라서 하나의 광축을 가진 single lens stereoscopic camera system들이 기존에 제시되어 왔으나 여전히 single lens stereoscopic system에도 문제점이 존재한다. 이에 본 논문에서는 기존에 제시된 stereoscopic camera system을 two lens / single lens로 나누어 조사 분석하고, 분석한 문제점을 해결하기 위한 새로운 single lens stereoscopic camera system을 제안할 것이다.