• Journal of the Semiconductor & Display Technology
• /
• v.7 no.1
• /
• pp.1-5
• /
• 2008

In this paper, we fabricated pressure difference type gas flow sensor using only dry etching technology by ICP-RIE(inductive coupled plasma reactive ion etching). The sensor's structure consists of a common shear stress type piezoresistive pressure sensor with an orifice fabricated in the middle of the sensor diaphragm. Generally, structure like diaphragm is fabricated by wet etching technology using TMAH, but we fabricated diaphragm by only dry etching using ICP-RIE. To equalize the thickness of diaphragm we applied insulator($SiO_2$) layer of SOI(Si/$SiO_2$/Si-sub) wafer as delay layer of dry etching. Size of fabricated diaphragm is $1000{\times}1000{\times}7\;{\mu}m^3$ and overall chip $3000{\times}3000{\times}7\;{\mu}m^3$. We measured the variation of output voltage toward the change of gas pressure to analyze characteristics of the fabricated sensor. Sensitivity of fabricated sensor was relatively high as about 1.5mV/V kPa at 1kPa full-scale. Nonlinearity was below 0.5%F.S. Over-pressure range of the fabricated sensor is 100kPa or more.

• Journal of the Korean Society of Safety
• /
• v.8 no.4
• /
• pp.27-40
• /
• 1993

High temperature tensile tests, steady state creep tests, Internal stress tests and creep rupture tests using A17075 alloy( $T_{6}$ ) were performed over the temperature range of 9$0^{\circ}C$~50$0^{\circ}C$ (0.4 $T_{m}$ ~0.85 $T_{m}$ ) and stress range of 0.64~17.2(kgf/$\textrm{mm}^2$). The main results obtained in this paper were as follows. (1) The activation energies for yielding at the temperature of 0.4 $T_{m}$ ~0.75 $T_{m}$ were calculated to be 25.7~36.5kcal/mol, which were nearly equal to the activation energies for creep. (2) At around the temperature of 9$0^{\circ}C$~12$0^{\circ}C$ and under the stress level of 10~17.2(kgf/$\textrm{mm}^2$), and at around the temperature of 200~41$0^{\circ}C$ and under the stress level of 1.53~9.55(kgf/$\textrm{mm}^2$) and again at around the temperature of 470~50$0^{\circ}C$ and under the stress level of 0.62~l.02(kgf/$\textrm{mm}^2$), the applied stress dependence of steady state creep rate $n_{measu}$ measured were, respectively, 3.15, 6.62 and 1.1, which were in good agreement the calculated stress dependence $n_{ealeu}$ obtained by the difference of the applied stress dependence of the Internal stress and the ratio of the internal stress to the applied stress. (3) At the temperature range of 0.4~0.43 $T_{m}$ , and at the temperature range of 0.52~0.75 $T_{m}$ and again at the temperature range of 0.82~0.85 $T_{m}$ , the activation energies $Q_{measu}$ obtained by steady state creep rate, respective, 26. 16, 34.9, 36.2 and 36.1kcal/mol, which were in good agreement with those obtained with the activation energies under constant effective stress and the temperature dependence of Internal stress. (4) At the temperature range of the 0.52~0.73 $T_{m}$ and under the stress level of 1.53~9.55(kgf/$\textrm{mm}^2$), the stress dependence of rupture life(n’) measured was 6.3~6.6, which was in good agreement with the stress dependence of steady state creep rate(n). And at the same condition the activation energy for rupture( $Q_{f}$ ) measured was 32.0~36.9kca1/mol, which was also in good agreement with the activation energy obtained by steady state creep rate ( $Q_{c}$ ). (5) The rupture life( $t_{f}$ ) might be represented by athermal process attributed to the difference of the applied stress dependence of the internal stress and the ratio of the internal stress to the applied stress, and the thermal activated process attributied to the temperature dependence of the internal stress as $t_{f}$ = A'$\sigma$$_{a}$ ｛n(1-d $\sigma$$_{i}$ /d $\sigma$$_{a}$ )/(1-$\sigma$$_{i}$ / $\sigma$$_{a}$ )｝.exp[｛ $Q_{c}$ $^{*}$-( $n_{o}$ R $T^2$/ $E_{(T)}$) (d $E_{(T)}$/dT) - ( $n_{0}$ R $T^2$/ $\sigma$$_{a}$ - $\sigma$$_{i}$ ) (d $\sigma$$_{i}$ /dT)｝/RT]. (6) The relationship betwween Larson-Miller rupture parameter and logarithmic stress was linearly decreased, so creep rupture life of Al 7075 alloy seemed to be predicted exactly with Larson-Miller parameter.meter.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.1
• /
• pp.7-12
• /
• 2002

The gas diffusion electrodes as oxygen cathodes f3r the brine electrolysis process were investigated. The gas diffusion electrode consists of a reaction layer, a gas diffusion layer, and a current distributor. The reaction layer was made from hydrophilic carbon black, hydrophobic carbon black, PTFE(polyterafluoroethylene), and Ag catalyst loaded by the silver mirror reaction or impregnation method. The gas diffusion layer was made from hydrophobic carbon black and PTFE, and Ni mesh was used as the current distributor in the reaction layer. The result that the gas diffusion electrode $(10wt\%\;Ag\;catalyst\;and\;20wt\%\;binder)$ manufactured by applying impregnation method to the carbon black f3r reaction layer showed the better performance was obtained from experiments. From the half-cell test, the measured overpotential of this oxygen cathode was about 700mV, And through the electrolysis experiment under the condition of $80^{\circ}C,\;32wt\%$ NaOH, and $300mA/cm^2$, the electrolysis voltage of this electrode was about 2.2 V, The gas diffusion electrodes manufactured in the present research were capable of continuous operations for three months.

• Geotechnical Engineering
• /
• v.13 no.3
• /
• pp.101-122
• /
• 1997

A spiting reinforcement system is composed of a series of radially installed reinforcing spites along the perimeter of the tunnel opening ahead of excavation. The reinforcing spill network is extended into the in-situ soil mass both radially and longitudinally The sailing reinforcement system has been successfully used for the construction of underground openings to reinforce weak rock formations on several occasions. The application of this spiting reinforcement system is currently extended to soft ground tunneling in limited occasions because of lack of reliable analysis and design methods. A method of threetimensional limit equilibrium stability analysis of the smile-reinforced shallow tunnel in soft ground is presented. The shape of the potential failure wedge for the case of smile-reinforced shallow tunnel is assumed on the basis of the results of three dimensional finite element analyses. A criterion to differentiate the spill-reinforced shallow tunnel from the smile-reinforced deep tunnel is also formulated, where the tunnel depth, soil type, geometry of the tunnel and reinforcing spites, together with soil arching effects, are considered. To examine the suitability of the proposed method of threedimensional stability analysis in practice, overall stability of the spill-reinforced shallow tunnel at facing is evaluated, and the predicted safety factors are compared with results from twotimensional analyses. Using the proposed method of threetimensional limit equilibrium stability analysis of the smile-reinforced shallow tunnel in soft ground, a parametric study is also made to investigate the effects of various design parameters such as tunnel depth, smile length and wadial spill spacing. With slight modifications the analytical method of threeiimensional stability analysis proposed may also be extended for the analysis and design of steel pipe reinforced multi -step grouting technique frequently used as a supplementary reinforcing method in soft ground tunnel construction.

• Journal of Plant Biotechnology
• /
• v.35 no.4
• /
• pp.307-316
• /
• 2008

Transposon-mediated insertional mutagenesis is one of powerful strategy for assessing functions of genes in higher plants. In this report, we have selected highly susceptible and tolerance plant by screening about high salt (3% NaCl) and cold stresses ($4^{\circ}C$) from F2 seeds of 30,000 Ac/Ds insertional mutagenesis lines in rice (Oryza sativa L. cv. Dongjin). In order to identify the gene tagging, insertion of Ds element was analyzed by Southern blot and these results revealed that 19 lines were matched genotype of selected lines with phenotype from the first selected 212 lines, and 13 lines have one copy of Ds elements. The Franking Sequence Tags (FSTs) of selected mutant lines showed high similarities with the following known function genes: signal transduction and regulation of gene expression (transpoter, protease family protein and apical meristem family protein), osmotic stress response (heat shock protein, O-methyltransferase, glyceraldehyde-3-phosphate dehydrogenase and drought stress induce protein), vesicle trafficking (SYP 5 family protein) and senescence associated protein. The expression pattern of 19 genes were analyzed using RT-PCR under the abiotic stresses of 9 class; 250mM NaCl, osmotic, drought, 3% $H_2O_2$, $100{\mu}M$ ABA, $100{\mu}M$ IAA, 0.1 ppm 2,4-D, $4^{\circ}C$ cold and $38^{\circ}C$ high temperature. Isolated knock-out genes showed the positive response about 250 mM NaCl, drought, $H_2O_2$, PEG, IAA, 2,4-D, ABA treatment and low ($4^{\circ}C$) and high temperature ($38^{\circ}C$). The results from this study indicate that function of selected knock-out genes could be useful in improving of tolerance to abiotic stresses as an important transcriptional activators in rice.

• Korean journal of applied entomology
• /
• v.12 no.2
• /
• pp.57-62
• /
• 1973

한국의 뽕나무 해충은 210종 이상이 기록되었다. 과거 4반세기 동안 다수의 합성농약이 농림해충 및 위생해충 방제에 큰 공헌을 해 온 것은 주지의 사실이다. 그러나 뽕나무의 해충에 대해서는 농약에 대한 내약력이 가장 약한 누에에 미칠 악영향 때문에 여러 가지 어려운 점이 많아서 외국에서도 잔효성이 짧은 TEPP 또는 DDVP등이 사용되고 있을 정도이다. 한국에서도 뽕나무순혹파리 방제를 위해서 초여름에 BHC 분제의 토양처리가 실천되어 왔으며 근래에는 뽕나무애바구미의 피해가 심해져서 몇 가지 살충제로 방제시험이 백에 의해서 이루어 졌을 뿐이다· 따라서 뽕나무해풍 방제를 위해서는 천적을 이용한 방제가 바람직하다 하겠다. 필자들은 우선 천적으로서의 거미의 분포 실태를 파악하기 위하여 수원시 소재 잠업시험장 뽕밭에서 1971-72년에 조사하였다. (Fig. 1) 조사된 뽕밭의 면적을 27a이었으며 9개의 조사구를 택하고 이것을 생태적 환경에 따라 3군으로 나누어 비교해 보았다. A, B 및 C구는 동쪽 가에 위치하며 가로등과 3개의 잠실의 등불의 영향을 받아 해충의 밀도가 높았으며 E, D 및 H구는 뽕밭의 중앙부이며 뽕나무 오갈병의 피해가 심하여 뽕나무가 작았고 또한 결주도 많았다. F, G 및 I구는 도로를 격하고 뽕밭 또는 초지에 면한 가장자리 이었 다. 이밖에 수시로 근처의 딴 뽕밭에서 채집한 것도 포함하여 4,987마리의 거미를 조사한 바 17과 47속 66종에 이르렀다. 이것을 Abe의 보고와 비교한 때 종수가 월등 많았으며 또한 Kayashima의 보고와는 달리 풀거미속(Agelena)거미가 훨씬 적은 것이 특이하였다. 채집된 거미를 그 생태에 기초하여 4군으로 나누어 천적으로서의 가치를 비교해 보면 다음과 같다. A군 : 대형의 둥근 망을 치는 종류들로서 날으는 곤충을 잡아먹는데 천적으로서 그다지 중요하지는 않다. 106주에서 245마리가 채집되었으며 (Tetragnatha squamata)가 우량종이었다. B군 : 소형의 둥근 망을 가지나 잎사이에 치는 종들로서 비록 몸은 작지만 가장 중요한 천적이다. 꼬마거미과 애접시거미과에 속하는 거미들이며 18종, 2,815마리가 잡혔다 우점종은 (Erigoridium raminicola),(Theridion octomaculata) (Enoplognatha spp.)이었다. C군 : 떠돌이거미로서 소형곤충을 잡아먹어 유력한 천적이다 26종 1,727마리가 잡혔으며 게거미과, 깡총거미과 및 염낭거미과의 거미들이 우점종이었다. D군 : 지상을 걸어다니는 떠돌이거미로서 늑대거미과가 약간 잡혔으나 천적으로서 중요한 것으로는 생각되지 않는다. 앞으로 이들과 해충과의 관계를 조사구명 해야 할 것이다.

• Textile Coloration and Finishing
• /
• v.31 no.3
• /
• pp.135-146
• /
• 2019

A series of azo based disperse dyes were synthesized and applied to polyester(PET) fiber in supercritical carbon dioxide($ScCO_2$). Various aniline derivatives were used as diazo component and coupled with glycine ethylester or carbonic acid ethylester derivatives to give azo based disperse dyes. Depending on the various diazo substituents, absorption maxima varied from 415 to 529nm in acetone. Dyeing in $ScCO_2$ was carried out at $120^{\circ}C$ and 250bar pressure for 2hrs with 0.5% o.w.f. of dye concentration. Dyed PET fiber had excellent brightness and good light, washing and perspiration(acid/alkali) fastness properties.

• Textile Coloration and Finishing
• /
• v.34 no.3
• /
• pp.135-145
• /
• 2022

In this study, the dyeability of 0.06-denier-per-filament (dpf) ultrafine sea-island-type nylon knitted fabric was investigated and compared with that of 1.0-dpf general nylon with respect to four types of dyes. In particular, leveling, milling, half-milling, and metal-complex dyes were compared at concentrations of 0.5%, 1.0%, 2.0%, 4.0%, and 8.0% on-weight-fabric (o.w.f). In each case, staining was performed at 100 ℃. The dyeabilities of the materials were compared in terms of the depth of color as defined by the ratio of the absorption coefficient (K) to the scattering coefficient (S). Results indicated generally low K/S values for both the 0.06-dpf ultrafine sea-island-type nylon and 1.0-dpf general nylon. In terms of the dye type, the milling and half-milling dyes exhibited K/S values of ≥20 for all colors of yellow, red, and blue for the 0.06-dpf ultrafine yarn sea-island-type nylon, which were superior to those of the other dye types. Hence, the milling and half-milling dyes are considered more suitable than the other dyes. Further, a comparison of dye fastness and compatibility revealed that the half-milling dye was the most suitable dye for the 0.06-dpf ultrafine sea-island-type nylon.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.156-156
• /
• 2016

The effect of nitrogen doping on the mechanical and tribological performance of single-layer tetrahedral amorphous carbon (ta-C:N) coatings of up to $1{\mu}m$ in thickness was investigated using a custom-made filtered cathode vacuum arc (FCVA). The results obtained revealed that the hardness of the coatings decreased from $65{\pm}4.8GPa$ to $25{\pm}2.4GPa$ with increasing nitrogen gas ratio, which indicates that nitrogen doping occurs through substitution in the $sp^2$ phase. Subsequent AES analysis showed that the N/C ratio in the ta-C:N thick-film coatings ranged from 0.03 to 0.29 and increased with the nitrogen flow rate. Variation in the G-peak positions and I(D)/I(G) ratio exhibit a similar trend. It is concluded from these results that micron-thick ta-C:N films have the potential to be used in a wide range of functional coating applications in electronics. To achieve highly conductive and wear-resistant coatings in system components, the friction and wear performances of the coating were investigated. The tribological behavior of the coating was investigated by sliding an SUJ2 ball over the coating in a ball-on-disk tribo-meter. The experimental results revealed that doping using a high nitrogen gas flow rate improved the wear resistance of the coating, while a low flow rate of 0-10 sccm increased the coefficient of friction (CoF) and wear rate through the generation of hematite (${\alpha}-Fe_2O_3$) phases by tribo-chemical reaction. However, the CoF and wear rate dramatically decreased when the nitrogen flow rate was increased to 30-40 sccm, due to the nitrogen inducing phase transformation that produced a graphite-like structure in the coating. The widths of the wear track and wear scar were also observed to decrease with increasing nitrogen flow rate. Moreover, the G-peaks of the wear scar around the SUJ2 ball on the worn surface increased with increasing nitrogen doping.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3808-3815
• /
• 2021

In this paper, the EPICS2017 photoatomic database was used to evaluate the photon mass attenuation coefficients and buildup factors of soils collected at different depths in the Philippine islands. The extraction and interpolation of the library was accomplished at the recommended linear-linear scales to obtain the incoherent and total cross section and mass attenuation coefficient. The buildup factors were evaluated using the G-P fitting method in ANSI/ANS-6.4.3. An agreement was achieved between XCOM, MCNP5, and EPICS2017 for the calculated mass attenuation coefficient values. The buildup factors were reported at several penetration depths within the standard energy grid. The highest values of both buildup factor classifications were found in the energy range between 100 and 400 keV where incoherent scattering interaction probabilities are predominant, and least at the region of predominant photoionization events. The buildup factors were examined as a function of different soil silica contents. The soil samples with larger silica concentrations were found to have higher buildup factor values and hence lower shielding characteristics, while conversely, those with the least silica contents have increased shielding characteristics brought by the increased proportions of the abundant heavier oxides.