• Journal of the Korean Applied Science and Technology
• /
• v.18 no.1
• /
• pp.12-19
• /
• 2001

Eu(III) exhibits one electron-transfer reduction at $E_{1/2}$ = -0.564 V(vs. Ag/AgCl) and the hypersensitive peak at 615 ㎚ corresponding to $^{5}D_{0}{\rightarrow}^{7}F_{2}$ transition in 0.1 M $LiClO_{4}$ aqueous solution. Upon the addition of 2,6-pyridine dicarboxylic acid(PDA) to the Eu(III) aqueous soultion, the reduction potential shifts negatively and the PDA, and the Eu(III)-PDA complex emits great fluorescence than free-Eu(III) ion at 615 nm. The results are interpreted in term of the electrochemical and spectrofluorometric studies.

• Journal of Sericultural and Entomological Science
• /
• v.32 no.1
• /
• pp.68-72
• /
• 1990

The color fastness of Korean silk fabrics was measured in this investigation. The sample fabrics under examination were divided into four groups, according to the processing cycle: 1) Plain dyeing(A-C) : 2) Yarn dyeing(D;E=Knitted fabric) ; 3) Direct printing(F-H) ; 4) Discharge Printing(I-P) : The following result can be obtained. Among the samples examined, both the plain-dyed(brilliant colours) and discharge-printed (put-in colours) fabrics show lower values of water, perspiration and ironing color fastness compared with those recommended by International Organization for Standardization(I. S. O.)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.190-190
• /
• 2009

전자산업에의 필수인 커패시터는 소형화, 저저항, 고전압을 향한 추세가 늘고 있으며, 이외에도 고전압 전원, 고전압 회로 등 중전기기에 필요한 고전압, 고용량 커패시터가 사용되고 있다. 중전기기에 사용되는 커패시터는 기기에 따라 틀리지만 내전압이 보통 10kV 이상이고 정전용량이 500pF 안팎이며, 대부분 외국에서 수입에 의존하고 있는 실정이다. 본 연구에서는 $Nb_2O_5$를 2mol% 첨가한 $BaTiO_3$를 일반적인 고상 소결법으로 제조하고 성형 시 crack을 방지하기 위해 binder 및 plasticizer를 사용하였으며, binder 첨가량에 따른 성형밀도를 측정하여 최적의 binder양을 선택하였다. 성형 밀도가 떨어짐에 따라 절연파괴강도가 낮아지기 때문에 성형 밀도를 높이기 위해 CIP를 하였으며, 소결후 capacitance와 d-factor를 측정하여 수치가 허용 범위에 들어 올 경우 전극을 형성하고 표면파괴를 방지하기 위하여 epoxy로 표면코팅을 하였다. DC 60kV용 Hi-pot tester를 사용하여 15kV까지 선형적으로 증가시켜 내전압 테스트를 실시하였으며, 제조 된 커패시터 중 몇 개의 sample을 SEM 및 XRD를 사용하여 미세구조와 결정상을 조사하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.159-162
• /
• 1999

All solid state thin film micro-batteries consisting of lithium metal anode, an amorphous LiPON electrolyte and cathode of vanadium oxide have been fabricated and characterized, which were fabricated with cell structure of Li/LiPON/V$_2$O$\sub$5/Pt. The vanadium oxide thin films were formed by d.c. reactive sputtering on Pt current collector. After deposition of vanadium oxide films, in-situ growths of lithium phosphorus oxynitride film were conducted by r.f. sputtering of Li$_3$PO$_4$ target in mixture gas of N$_2$ and O$_2$. The pure metal lithium film was deposited by thermal evaporation on thin film LiPON electrolyte. The cell capacity was about 45${\mu}$Ah/$\textrm{cm}^2$ $\mu\textrm{m}$ after 200 cycle. No appreciable degradation of the cell capacity could be observed after 50 cycles .

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.1
• /
• pp.13-20
• /
• 2003

Both MgO and $Sc_2O_3$ are shown to provide low interface state densities (in the $10^{11}{\;}eV^{-1}{\;}cm{\;}^{-2}$ range)on n-and p-GaN, making them useful for gate dielectrics for metal-oxide semiconductor(MOS) devices and also as surface passivation layers to mitigate current collapse in GaN/AlGaN high electron mobility transistors(HEMTs).Clear evidence of inversion has been demonstrated in gate-controlled MOS p-GaN diodes using both types of oxide. Charge pumping measurements on diodes undergoing a high temperature implant activation anneal show a total surface state density of $~3{\;}{\times}{\;}10^{12}{\;}cm^{-2}$. On HEMT structures, both oxides provide effective passivation of surface states and these devices show improved output power. The MgO/GaN structures are also found to be quite radiation-resistant, making them attractive for satellite and terrestrial communication systems requiring a high tolerance to high energy(40MeV) protons.

• Journal of the Korean Chemical Society
• /
• v.40 no.6
• /
• pp.427-435
• /
• 1996

The structures of fully dehydrated $Ca^{2+}$- and $Cs^+$-exchanged zeolite X, $Ca_{35}Cs_{22}Si_{100}Al_{92}O_{384}$($Ca_{35}Cs_{22}$-X; a=25.071(1) $\AA)$ and $Ca_{29}Cs_{34}Si_{100}Al_{92}O_{384}$($Ca_{29}Cs_{34}$-X; a=24.949(1) $\AA)$, have been determined by single-crystal X-ray diffraction methods in the cubic space group Fd3 at $21(1)^{\circ}C.$ Their structures were refined to the final error indices $R_1$=0.051 and $R_2$=0.044 with 322 reflections for $Ca_{35}Cs_{22}$-X, and $R_1$=0.058 and $R_2$=0.055 with 260 reflections for $Ca_{29}Cs_{34}$-X; $I>3\sigma(I).$ In both structures, $Ca^{2+}$ and $Cs^+$ ions are located at five different crystallographic sites. In dehydrated $Ca_{35}Cs_{22}$-X, sixteen $Ca^{2+}$ ions fill site I, at the centers of the double 6-rings(Ca-O=2.41(1) $\AA$ and $O-Ca-O=93.4(3)^{\circ}).$ Another nineteen $Ca^{2+}$ ions occupy site II (Ca-O=2.29(1) $\AA$, O-Ca-O=118.7(4)') and ten $Cs^+$ ions occupy site II opposite single six-rings in the supercage; each is $1.95\AA$ from the plane of three oxygens (Cs-O=2.99(1) and $O-Cs-O=82.3(3)^{\circ}).$ About three $Cs^+$ ions are found at site II', 2.27 $\AA$ into sodalite cavity from their three-oxygen plane (Cs-O=3.23(1) $\AA$ and $O-Cs-O=75.2(3)^{\circ}).$ The remaining nine $Cs^+$ ions are statistically distributed over site Ⅲ, a 48-fold equipoint in the supercages on twofold axes (Cs-O=3.25(1) $\AA$ and Cs-O=3.49(1) $\AA).$ In dehydrated $Ca_{29}Cs_{34}$-X, sixteen $Ca^{2+}$ ions fill site I(Ca-O=2.38(1) $\AA$ and $O-Ca-O=94.1(4)^{\circ})$ and thirteen $Ca^{2+}$ ions occupy site II (Ca-O=2.32(2) $\AA$, $O-Ca-O=119.7(6)^{\circ}).$ Another twelve $Cs^+$ ions occupy site II; each is $1.93\AA$ from the plane of three oxygens (Cs-O=3.02(1) and $O-Cs-O=83.1(4)^{\circ})$ and seven $Cs^+$ ions occupy site II'; each is $2.22\AA$ into sodalite cavity from their three-oxygen plane (Cs-O=3.21(2) and $O-Cs-O=77.2(4)^{\circ}).$ The remaining sixteen $Cs^+$ ions are found at III site in the supercage (Cs-O=3.11(1) $\AA$ and Cs-O=3.46(2) $\AA).$ It appears that $Ca^{2+}$ ions prefer sites I and II in that order, and that $Cs^+$ ions occupy the remaining sites, except that they are too large to be stable at site I.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.1
• /
• pp.14-18
• /
• 1997

Sulconazole nitrate, C18H16Cl3N3O3S, crystallizes in monoclinic, space group C2/c, with a=14.401(1), b=8.051(1), c=34.861(2) Å, β=95.9(1)°, g=0.58 mm-1, Dc=1.523 g/cm3, Dm=1.522 g/cm3, F(000)=1888.0, and z=8. Intensities for 2460 unique reflections were measured on a CAD4 diffractometer with graphited-monochromated Mo-Kα radiation. The structure was solved by direct method and refined by full matrix least squares to a final R=0.071 for 2182 reflections (Io > 2σIo). The bond lengths and angles are comparable with the values found in the analogues imidazole derivatives. The 2,4-dichlorophenyl ring(A) and the p-chlorophenyl ring(B) are almost planar with different heights [dihedral angle 17.3°] while the imidazole ring(C) is nearly perpendicular to the two phenyl rings[dihedral angles about the two rings A, B are 110.8° and 96.1° respectively]. In order to understand the overall conformation we calculated the selected distances (l1, l2, l3) among the center of the three rings and considered the imaginary plan D[C(7), C(9) and C(16)]. The two polar group S(8) and N(19) do not have gauche conformation and l2 value (4.47 Å) is shorter than the other imidazole derivatives. One -NO3 group are hydrogen bonded the two neighbored sulconazole molecules. The molecular crystal packing is also formed by two hydrogen bondings and van der Waals forces.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.9 no.1
• /
• pp.1-18
• /
• 1973

For regulating the depth of midwater trawl nets towed at the optimum constant speed, the changes in the shape of warps caused by adding a weight on an arbitrary point of the warp of catenary shape is studied. The shape of a warp may be approximated by a catenary. The resultant inferences under this assumption were experimented. Accordingly feasibilities for the application of the result of this study to the midwater trawl nets were also discussed. A series of experiments for basic midwater trawl gear models in water tank and a couple of experiments of a commercial scale gears at sea which involve the properly designed depth control devices having a variable attitude horizontal wing were carried out. The results are summarized as follows: 1. According to the dimension analysis the depth y of a midwater trawl net is introduced by $$y=kLf(\frac{W_r}{R_r},\;\frac{W_o}{R_o},\;\frac{W_n}{R_n})$$) where k is a constant, L the warp length, f the function, and $W_r,\;W_o$ and $W_n$ the apparent weights of warp, otter board and the net, respectively, 2. When a boat is towing a body of apparent weight $W_n$ and its drag $D_n$ by means of a warp whose length L and apparent weight $W_r$ per unit length, the depth y of the body is given by the following equation, provided that the shape of a warp is a catenary and drag of the warp is neglected in comparison with the drag of the body: $$y=\frac{1}{W_r}\{\sqrt{{D_n^2}+{(W_n+W_rL)^2}}-\sqrt{{D_n^2+W_n}^2\}$$ 3. The changes ${\Delta}y$ of the depth of the midwater trawl net caused by changing the warp length or adding a weight ${\Delta}W_n$_n to the net, are given by the following equations: $${\Delta}y{\approx}\frac{W_n+W_{r}L}{\sqrt{D_n^2+(W_n+W_{r}L)^2}}{\Delta}L$$ $${\Delta}y{\approx}\frac{1}{W_r}\{\frac{W_n+W_rL}{\sqrt{D_n^2+(W_n+W_{r}L)^2}}-{\frac{W_n}{\sqrt{D_n^2+W_n^2}}\}{\Delta}W_n$$ 4. A change ${\Delta}y$ of the depth of the midwater trawl net by adding a weight $W_s$ to an arbitrary point of the warp takes an equation of the form $${\Delta}y=\frac{1}{W_r}\{(T_{ur}'-T_{ur})-T_u'-T_u)\}$$ Where $$T_{ur}^l=\sqrt{T_u^2+(W_s+W_{r}L)^2+2T_u(W_s+W_{r}L)sin{\theta}_u$$ $$T_{ur}=\sqrt{T_u^2+(W_{r}L)^2+2T_uW_{r}L\;sin{\theta}_u$$ $$T_{u}^l=\sqrt{T_u^2+W_s^2+2T_uW_{s}\;sin{\theta}_u$$ and $T_u$ represents the tension at the point on the warp, ${\theta}_u$ the angle between the direction of $T_u$ and horizontal axis, $T_u^2$ the tension at that point when a weights $W_s$ adds to the point where $T_u$ is acted on. 5. If otter boards were constructed lighter and adequate weights were added at their bottom to stabilize them, even they were the same shapes as those of bottom trawls, they were definitely applicable to the midwater trawl gears as the result of the experiments. 6. As the results of water tank tests the relationship between net height of H cm velocity of v m/sec, and that between hydrodynamic resistance of R kg and the velocity of a model net as shown in figure 6 are respectively given by $$H=8+\frac{10}{0.4+v}$$ $$R=3+9v^2$$ 7. It was found that the cross-wing type depth control devices were more stable in operation than that of the H-wing type as the results of the experiments at sea. 8. The hydrodynamic resistance of the net gear in midwater trawling is so large, and regarded as nearly the drag, that sweeping depth of the gear was very stable in spite of types of the depth control devices. 9. An area of the horizontal wing of the H-wing type depth control device was $1.2{\times}2.4m^2$. A midwater trawl net of 2 ton hydrodynamic resistance was connected to the devices and towed with the velocity of 2.3 kts. Under these conditions the depth change of about 20m of the trawl net was obtained by controlling an angle or attack of $30^{\circ}$.

• Journal of Life Science
• /
• v.22 no.12
• /
• pp.1665-1671
• /
• 2012

This study was conducted to assess the removal of residual pesticides and to obtain high amounts of quercetin in onion peel extracts (OPEs) by 4 washing treatments. Washing is one of the standard processing steps in obtaining functional food ingredients from onion peel. After a first detergent wash (0.2% w/v) (DW) and hot air drying ($80^{\circ}C$, 24 hr) (B), 4 washing treatments were tested, including a second DW (C), ultrasonication ($50^{\circ}C$, 10 min) plus DW (D), 0.3% $H_2O_2$ (v/v) plus DW (E), and blanching ($95-97^{\circ}C$, 2 min) plus DW (F). This was followed by 60% (v/v) ethanol extraction and vacuum freeze drying of the OPE. The E treatment yielded 89.04% OPE and a quercetin content of 96.84% in the OPE compared with the B treatment, and had the highest efficiency of all treatments tested. The OPE was tested for the presence of 177 residual pesticides and three compounds were detected in all treatments: cyhalothirn, fluquinconazole and procymidone. Cyhalothirn and fluquinconazole levels were below the permitted levels for fresh onion, while procymidone was present in the high level range of 128.01~133.46 mg/kg in all samples. The E treatment was a better washing method than the others for removal of residual pesticides. It could reduce the level of residual pesticides without changing the functional properties of the OPE.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.592-601
• /
• 2013

This work, which was about the synthesis of 3-(1,8-Naphthalimido) propyl methacrylate and GMA copolymers and their physical properties, investigated the compositions of the copolymer, the reactivity ratios of the monomer, resonance effect(Q), polar effect(e) and fluorescence effect of 1,8-naphthalicanhydride. Azobisisobutyronitronitryl(AIBN) as an initiator was employed at $60^{\circ}C$ with dimethylformamide(DMF) of solvent for the copolymerization of NIPM. $r_1$ was found to be higher than $r_2$ from the reactivity ratios of the monomer obtained from F-R and K-T methods. NIPM was found to be more copolymerized than GMA. The fluorescence spectrums of these polymers showed a weak monomer fluorescence band at 380 nm and a strong excimer fluorescence band at about 460 nm.